A prototype high-speed CMOS image sensor with 10,000,000 fps burst-frame rate and 10,000 fps continuous-frame rate

In this paper, a high-speed CMOS image sensor having a new architecture and a new operating principle has been developed. The image sensor achieves both the continuous capturing and the burst capturing by a single chip, and has low power consumption, low heat generation, high sensitivity and high S/N ratio. This image sensor consist of mainly four blocks, two dimensional pixel array of 4-transister CMOS active pixel, analog memory arrays connected with each pixel output line independently to the pixel array, scanning circuits and multiple number of output amplifiers. A prototype image sensor was fabricated using a 0.18μm 2-Poly 3-Metal CMOS technology with the die size of 5550 μmH x 4575 μmV, the pixel size of 48 μmH x 48 μmV, the number of pixels of 72H x 32V, the number of analog memories of 104 memories per pixel and the 6 parallel horizontal output circuits and output amplifiers. The aperture ratio is 35% and the conversion gain is 60 μV/e-(input referred). It has been confirmed that this image sensor achieves 10,000,000 fps during burst capturing mode and 10,000 fps during the continuous capturing mode through the image capture experiments of high speed phenomena such as rotating object and discharge phenomenon.