Analysis of multi-carrier PWM methods for back-to-back HVDC systems based on modular multilevel converters

This paper analyzes two multi-carrier pulse-width modulation (PWM) techniques (N+1 and 2N+1) of the Modular Multilevel Converter (MMC) used in a back-to-back configuration under conventional dq-frame control. The PWM method applied to the MMC has an effect not only on the output waveforms and number of levels derived out of a given configuration of the MMC but also on the DC-link voltage and arm currents of the converter. As the number of sub-modules in the phase-leg increases, the 2N+1 modulation becomes more attractive as it provides improved waveforms without significantly affecting the operation of the converter. The simulation results show the application and good performance of both methods and the advantages of utilizing the 2N+1 modulation as the number of sub-modules increases.

[1]  Rainer Marquardt,et al.  An innovative modular multilevel converter topology suitable for a wide power range , 2003, 2003 IEEE Bologna Power Tech Conference Proceedings,.

[2]  Marc Hiller,et al.  Modulation, Losses, and Semiconductor Requirements of Modular Multilevel Converters , 2010, IEEE Transactions on Industrial Electronics.

[3]  H. Akagi,et al.  Control and Experiment of Pulsewidth-Modulated Modular Multilevel Converters , 2009, IEEE Transactions on Power Electronics.

[4]  Hans-Peter Nee,et al.  Inner control of Modular Multilevel Converters - An approach using open-loop estimation of stored energy , 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

[5]  M. Glinka,et al.  Prototype of multiphase modular-multilevel-converter with 2 MW power rating and 17-level-output-voltage , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[6]  Hirofumi Akagi.  Classification, Terminology, and Application of the Modular Multilevel Cascade Converter (MMCC) , 2011 .

[7]  Vassilios G. Agelidis,et al.  Operation of a modular multilevel converter with selective harmonic elimination PWM , 2011, 8th International Conference on Power Electronics - ECCE Asia.

[8]  Lie Xu,et al.  Reduced switching-frequency modulation and circulating current suppression for modular multilevel converters , 2012, PES T&D 2012.

[9]  Zheng Xu,et al.  Impact of Sampling Frequency on Harmonic Distortion for Modular Multilevel Converter , 2011, IEEE Transactions on Power Delivery.

[10]  Bin Wu,et al.  Recent Advances and Industrial Applications of Multilevel Converters , 2010, IEEE Transactions on Industrial Electronics.

[11]  Vassilios G. Agelidis,et al.  Performance evaluation of half-bridge cascaded multilevel converters operated with multicarrier sinusoidal PWM techniques , 2009, 2009 4th IEEE Conference on Industrial Electronics and Applications.

[12]  Lie Xu,et al.  Multilevel-converter-based VSC transmission operating under fault AC conditions , 2005 .

[13]  U N Gnanarathna,et al.  Efficient Modeling of Modular Multilevel HVDC Converters (MMC) on Electromagnetic Transient Simulation Programs , 2011, IEEE Transactions on Power Delivery.

[14]  S. Allebrod,et al.  New transformerless, scalable Modular Multilevel Converters for HVDC-transmission , 2008, 2008 IEEE Power Electronics Specialists Conference.

[15]  V.G. Agelidis,et al.  VSC-Based HVDC Power Transmission Systems: An Overview , 2009, IEEE Transactions on Power Electronics.

[16]  Reza Iravani,et al.  Dynamic performance of a modular multilevel back-to-back HVDC system , 2010, 2011 IEEE Power and Energy Society General Meeting.

[17]  Reza Iravani,et al.  A unified dynamic model and control for the voltage-sourced converter under unbalanced grid conditions , 2006 .

[18]  Staffan Norrga,et al.  A New Modulation Method for the Modular Multilevel Converter Allowing Fundamental Switching Frequency , 2012 .