Electrorheological damper with annular ducts for seismic protection applications

This paper presents the design, analysis, testing and modeling of an electrorheological (ER) fluid damper developed for vibration and seismic protection of civil structures. The damper consists of a main cylinder and a piston rod that pushes an ER fluid through a stationary annular duct. The behavior of the damper can be approximated with Hagen - Poiseuille flow theory. The basic equations that describe the fluid flow across an annular duct are derived. Experimental results on the damper response with and without the presence of electric field are presented. As the rate of deformation increases, viscous stresses prevail over field-induced yield stresses and a smaller fraction of the total damper force can be controlled. Simple physically motivated phenomenological models are considered to approximate the damper response with and without the presence of electric field. Subsequently, the performance of a multilayer neural network constructed and trained by an efficient algorithm known as the Dependence Identification Algorithm is examined to predict the response of the electrorheological damper. A combination of a simple phenomenological model and a neural network is then proposed as a practical tool to approximate the nonlinear and velocity-dependent damper response.

[1]  Geoffrey E. Hinton,et al.  Learning internal representations by error propagation , 1986 .

[2]  S Unjoh,et al.  SEISMIC RESPONSE CONTROL OF BRIDGES BY VARIABLE DAMPERS , 1994 .

[3]  J J Hopfield,et al.  Neural networks and physical systems with emergent collective computational abilities. , 1982, Proceedings of the National Academy of Sciences of the United States of America.

[4]  T. T. Soong,et al.  Second Generation of Active Structural Control in Civil Engineering , 1996 .

[5]  Teuvo Kohonen,et al.  Content-addressable memories , 1980 .

[6]  D. Gamota,et al.  Dynamic mechanical studies of electrorheological materials: Moderate frequencies , 1991 .

[7]  P. Antsaklis,et al.  Modeling the Response of ER Damper: Phenomenology and Emulation , 1996 .

[8]  Michael C. Constantinou,et al.  Seismic response of structures with supplemental damping , 1993 .

[9]  Wilhelm Müller,et al.  Zum Problem der Anlaufströmung einer Flüssigkeit im geraden Rohr mit Kreisring- und Kreisquerschnitt , 1936 .

[10]  Sami F. Masri,et al.  Modeling the oscillatory dynamic behaviour of electrorheological materials in shear , 1992 .

[11]  J. L. Sproston,et al.  Applications of electro-rheological fluids in vibration control: a survey , 1996 .

[12]  Frank E. Filisko,et al.  Fourier transform analysis: Nonlinear dynamic response of an electrorheological material , 1993 .

[13]  S. Masri,et al.  Identification of Nonlinear Dynamic Systems Using Neural Networks , 1993 .

[14]  Norman M. Wereley,et al.  A nonlinear viscoelastic - plastic model for electrorheological fluids , 1997 .

[15]  Arne Collen.  The Foundation of Science , 1997 .

[16]  W. M. Winslow.  Induced Fibration of Suspensions , 1949 .

[17]  John Moody,et al.  Fast Learning in Networks of Locally-Tuned Processing Units , 1989, Neural Computation.

[18]  Panos J. Antsaklis,et al.  The dependence identification neural network construction algorithm , 1994, Proceedings of 1994 IEEE International Conference on Neural Networks (ICNN'94).

[19]  H. P. Block,et al.  REVIEW ARTICLE: Electro-rheology , 1988 .