Improved single phase modeling of propylene polymerization in a fluidized bed reactor

An improved model for the production of polypropylene in a gas phase fluidized bed reactor was developed. Comparative simulation studies were carried out using the well-mixed, constant bubble size and the improved models. The improved model showed different prediction characteristics of polymer production rate as well as heat and mass transfer behavior as compared to other published models. All the three models showed similar dynamic behavior at the startup conditions but the improved model predicted a narrower safe operation window. Furthermore, the safe ranges of variation of the main operating parameters such as catalyst feed rate and superficial gas velocity calculated by the improved and well mixed models are wider than that obtained by the constant bubble size model. The improved model predicts the monomer conversion per pass through the bed which varies from 0.28 to 5.57% within the practical ranges of superficial gas velocity and catalyst feed rate.

[1]  W. H. Ray,et al.  Polymerization of olefins through heterogeneous catalysis X: Modeling of particle growth and morphology , 1992 .

[2]  Y. A. Liu,et al.  Steady-State and Dynamic Modeling of Gas-Phase Polypropylene Processes Using Stirred-Bed Reactors , 2004 .

[3]  N. Mostoufi,et al.  TWO-PHASE MODELING OF A GAS PHASE POLYETHYLENE FLUIDIZED BED REACTOR , 2006 .

[4]  W. Ray,et al.  Polymerization of Olefins through Heterogeneous Catalysis. III. Polymer Particle Modelling with an Analysis of Intraparticle Heat and Mass Transfer Effects. , 1986 .

[5]  Navid Mostoufi,et al.  Modeling of fluidized bed reactor of ethylene polymerization , 2004 .

[6]  O. Levenspiel,et al.  Fluidization engineering, 2nd edition , 1991 .

[7]  João B. P. Soares,et al.  Deconvolution of chain-length distributions of linear polymers made by multiple-site-type catalysts , 1995 .

[8]  Jamal Chaouki,et al.  Characterization of dynamic gas–solid distribution in fluidized beds , 2000 .

[9]  F. Fernandes,et al.  Heterogeneous modeling for fluidized-bed polymerization reactor , 2001 .

[10]  Thomas J. Harris,et al.  A comparison of two-phase and well-mixed models for fluidized-bed polyethylene reactors , 1994 .

[11]  J. Werther,et al.  Local bubble gas hold-up and expansion of gas/solid fluidized beds , 1986 .

[12]  F. Mjalli,et al.  Dynamic modeling of gas phase propylene homopolymerization in fluidized bed reactors , 2011 .

[13]  Mohd Azlan Hussain,et al.  Kinetic modeling of propylene homopolymerization in a gas-phase fluidized-bed reactor , 2010 .

[14]  M. Hussain,et al.  Modified mathematical model for gas phase olefin polymerization in fluidized-bed catalytic reactor , 2009 .

[15]  J. Macgregor,et al.  A kinetic model for industrial gas-phase ethylene copolymerization , 1990 .

[16]  W. V. Swaaij,et al.  Gas-phase polymerization of propylene: Reaction kinetics and molecular weight distribution , 2001 .

[17]  W. Ray,et al.  THE DYNAMIC BEHAVIOUR OF FLUIDIZED BED REACTORS FOR SOLID CATALYZED GAS PHASE OLEFIN POLYMERIZATION , 1985 .

[18]  Navid Mostoufi,et al.  Modular simulation of fluidized bed reactors , 2004 .

[19]  W. H. Ray,et al.  Reactor residence time distribution effects on the multistage polymerization of olefins—I. Basic principles and illustrative examples, polypropylene , 1996 .

[20]  Y. Kissin.  Isospecific Polymerization of Olefins: With Heterogeneous Ziegler-Natta Catalysts , 1985 .

[21]  De-Pan Shi,et al.  Steady-state and dynamic modeling of commercial bulk polypropylene process of Hypol technology , 2009 .

[22]  V. Ranade,et al.  A computational model for predicting particle size distribution and performance of fluidized bed polypropylene reactor , 2004 .

[23]  Jamal Chaouki,et al.  Gas and solids between dynamic bubble and emulsion in gas-fluidized beds , 2001 .

[24]  Costas Kiparissides,et al.  Recent developments in modeling gas-phase catalyzed olefin polymerization fluidized-bed reactors: The effect of bubble size variation on the reactor's performance , 2000 .

[25]  David W. Bacon,et al.  Gas Phase Ethylene Polymerization: Production Processes, Polymer Properties, and Reactor Modeling , 1994 .

[26]  J. Arnaldos,et al.  Improved equation for the calculation of minimum fluidization velocity , 1986 .

[27]  Archie E. Hamielec,et al.  A kinetic mathematical model for heterogeneous Ziegler-Natta copolymerization , 1989 .