An overview of high-temperature electronic device technologies and potential applications

High-temperature electronics applications are found in combustion systems, well logging, and industrial processes, air stagnation points in supersonic aircraft, vehicle brakes, nuclear reactors, and dense electronic packages. We summarize physical effects and materials issues important for reliable operation of semiconductor device technologies at high temperatures (>125/spl deg/C). We review the high-temperature potential of Si, GaAs, other III-V compounds, and SiC. For completeness, we also comment on nitrides, diamond, and vacuum microelectronics. We conclude that Si on insulator (SOI) technology can be developed readily for small signal operation up to about 300/spl deg/C. There is some ongoing work in this area. GaAs offers little advantage over Si because of poor device isolation and the lack of reliable contacts above 250/spl deg/C. Other III-V compounds could be developed for operation to /spl sim/600/spl deg/C, using processes similar to those used for optoelectronics. There may be a market niche for III-V power devices above 200/spl deg/C. There is considerable activity in semiconducting SiC, and device functionality has been demonstrated above 600/spl deg/C. SiC is promising for operation above 300/spl deg/C, and for power devices at frequencies from dc to /spl sim/10 GHz, but it faces numerous challenges to achieve manufacturable status. We attempt to match technologies with application areas. >

[1]  R. Fowler,et al.  Electron Emission in Intense Electric Fields , 1928 .

[2]  J. Black,et al.  Electromigration—A brief survey and some recent results , 1969 .

[3]  C. D. Thurmond.  The Standard Thermodynamic Functions for the Formation of Electrons and Holes in Ge, Si, GaAs , and GaP , 1975 .

[4]  V. Tsvetkov,et al.  Investigation of growth processes of ingots of silicon carbide single crystals , 1978 .

[5]  D. W. Palmer,et al.  Extreme Temperature Range Microelectronics , 1978 .

[6]  D. Palmer,et al.  Extension of High-Temperature Electronics , 1979 .

[7]  L. Palkuti,et al.  Integrated Circuit Characteristics at 260°C for Aircraft Engine-Control Applications , 1979 .

[8]  L. T. Fitch,et al.  Performance of Digital Integrated Circuit Technologies at Very High Temperatures , 1980 .

[9]  W. C. Nieberding,et al.  High-Temperature Electronic Requirements in Aeropropulsion Systems , 1981, IEEE Transactions on Industrial Electronics.

[10]  L. Ralph Dawson,et al.  Recent Advances in Gallium Phosphide Junction Devices for High-Temperature Electronic Applications , 1982, IEEE Transactions on Industrial Electronics.

[11]  James D. Beasom,et al.  Process Characteristics and Design Methods for a 300°C Quad Operational Amplifier , 1982, IEEE Transactions on Industrial Electronics.

[12]  Therhionic Integrated Circuits: Electronics for Hostile Environments , 1985, IEEE Transactions on Nuclear Science.

[13]  F. V. Thome,et al.  High-temperature silicon-on-insulator electronics for space nuclear power systems: requirements and feasibility , 1988 .

[14]  R. K. Traeger,et al.  High temperature electronics application in well logging , 1988 .

[15]  D. Dening,et al.  The Characterization of High Temperature Electronics for Future Aircraft Engine Digital Electronic Control Systems , 1988, 1988 American Control Conference.

[16]  H. Hartnagel,et al.  A new GaAs technology for stable FETs at 300 degrees C , 1989, IEEE Electron Device Letters.

[17]  D. Ciarlo,et al.  Modeling and fabricating micro-cavity integrated vacuum tubes , 1989 .

[18]  E. Zanoni,et al.  Failure Mechanisms of GaAs MESFETs and Low-Noise HEMTs , 1990 .

[19]  Stephen Przybylko.  High-temperature electronics for aircraft engines , 1990 .

[20]  Hans L. Hartnagel,et al.  A GaAs integrated differential amplifier for operation up to 300°C , 1991 .

[21]  Robert J. Trew,et al.  The potential of diamond and SiC electronic devices for microwave and millimeter-wave power applications , 1991, Proc. IEEE.

[22]  W. J. Choyke,et al.  SiC boule growth by sublimation vapor transport , 1991 .

[23]  Joseph J. Kopanski,et al.  Assessment of Reliability Concerns for Wide-Temperature Operation of Semiconductor Devices and Circuits , 1991 .

[24]  A. Scorzoni,et al.  Electromigration in thin-film interconnection lines: models, methods and results , 1991 .

[25]  M. Shur,et al.  Thin film deposition and microelectronic and optoelectronic device fabrication and characterization in monocrystalline alpha and beta silicon carbide , 1991, Proc. IEEE.

[26]  A. L. Barry,et al.  Energy dependence of electron damage and displacement threshold energy in 6H silicon carbide , 1991 .

[27]  F. S. Shoucair.  Potential and problems of high-temperature electronics and CMOS integrated circuits (25–250°C) - an overview , 1991 .

[28]  R. E. Oakley,et al.  Silicon carbide JFET radiation response , 1992 .

[29]  High-Temperature Operation of nMOSFET on Bonded SOI , 1992 .

[30]  Compound Semiconductor Devices for Operation at Elevated Temperatures , 1992, ESSDERC '92: 22nd European Solid State Device Research conference.

[31]  Hans L. Hartnagel,et al.  AlGaAs/GaAs HBT for high-temperature applications , 1992 .

[32]  B. Baliga.  Impact of SiC on Power Devices , 1992 .

[33]  Gary Thomas Belski,et al.  City Bus Tire Bead Heat Evaluation , 1992 .

[34]  Daniel M. Fleetwood,et al.  Thermally stimulated current measurements of SiO2 defect density and energy in irradiated metal-oxide-semiconductor capacitors , 1992 .

[35]  J. A. Lott,et al.  Visible (657 nm) InGaP/InAlGaP strained quantum well vertical‐cavity surface‐emitting laser , 1992 .

[36]  Progress in silicon carbide semiconductor technology , 1992 .

[37]  F. S. Shoucair,et al.  High-temperature electrical characteristics of GaAs MESFETs (25-400 degrees C) , 1992 .

[38]  Andria J Marshall.  Operating power ICs at 200 degrees , 1992, PESC '92 Record. 23rd Annual IEEE Power Electronics Specialists Conference.

[39]  S. M. Tyson,et al.  High temperature testing of SOI devices to 400/spl deg/C , 1993, Proceedings of 1993 IEEE International SOI Conference.

[40]  R. Johnson,et al.  A hybrid silicon carbide differential amplifier for 350 degrees C operation , 1993 .

[41]  Cavity design for improved electrical injection in InAlGaP/AlGaAs visible (639–661 nm) vertical‐cavity surface‐emitting laser diodes , 1993 .

[42]  B. J. Baliga,et al.  Comparison of 6H-SiC, 3C-SiC, and Si for power devices , 1993 .

[43]  J. Lott,et al.  InAIP/InAlGaP distributed Bragg reflectors for visible vertical cavity surface‐emitting lasers , 1993 .

[44]  C. Carter,et al.  Blue LEDs, UV photodiodes and high-temperature rectifiers in 6H-SiC , 1993 .

[45]  John W. Palmour,et al.  6H–silicon carbide devices and applications , 1993 .

[46]  A. Burk,et al.  Advances in silicon carbide (SiC) device processing and substrate fabrication for high power microwave and high temperature electronics , 1993, 15th Annual GaAs IC Symposium.

[47]  Richard Joseph Saia,et al.  Silicon carbide UV photodiodes , 1993 .

[48]  Charles Scozzie,et al.  High Temperature Stressing of Sic JFETs at 300°C , 1994 .

[49]  P. Neudeck,et al.  Performance limiting micropipe defects in silicon carbide wafers , 1994, IEEE Electron Device Letters.