Flexural behaviour of structural fibre composite sandwich beams in flatwise and edgewise positions

The flexural behaviour of a new generation composite sandwich beams made up of glass fibre-reinforced polymer skins and modified phenolic core material was investigated. The composite sandwich beams were subjected to 4-point static bending test to determine their strength and failure mechanisms in the flatwise and the edgewise positions. The results of the experimental investigation showed that the composite sandwich beams tested in the edgewise position failed at a higher load with less deflection compared to specimens tested in the flatwise position. Under flexural loading, the composite sandwich beams in the edgewise position failed due to progressive failure of the skin while failure in the flatwise position is in a brittle manner due to either shear failure of the core or compressive failure of the skin followed by debonding between the skin and the core. The results of the analytical predictions and numerical simulations are in good agreement with the experimental results.

[1]  Ayman Mosallam,et al.  Composites in Construction , 2007 .

[2]  L. C. Hollaway,et al.  Manufacture, testing and numerical analysis of an innovative polymer composite/concrete structural unit , 1999 .

[3]  Julio F. Davalos,et al.  Modeling and characterization of fiber-reinforced plastic honeycomb sandwich panels for highway bridge applications , 2001 .

[4]  Joachim L. Grenestedt,et al.  On using corrugated skins to carry shear in sandwich beams , 2008 .

[5]  M. Humphreys,et al.  The Structural Behaviour of Monocoque Fibre Composite Truss Joints , 1999 .

[6]  Yi-Ming Jen,et al.  Evaluating bending fatigue strength of aluminum honeycomb sandwich beams using local parameters , 2008 .

[7]  A. Nanni,et al.  MECHANICAL CHARACTERIZATION OF SANDWICH STRUCTURE COMPRISED OF GLASS FIBER REINFORCED CORE : PART 1 , 2005 .

[8]  Yeoshua Frostig,et al.  Stresses and failure patterns in the bending of sandwich beams with transversely flexible cores and laminated composite skins , 1996 .

[9]  Salim Belouettar,et al.  Experimental investigation of static and fatigue behaviour of composites honeycomb materials using four point bending tests , 2009 .

[10]  Keith R. Bootle,et al.  Wood In Australia: Types, Properties And Uses , 2005 .

[11]  L. Bank.  Composites for Construction: Structural Design with FRP Materials , 2006 .

[12]  Sami H. Rizkalla,et al.  Material characteristics of 3-D FRP sandwich panels , 2008 .

[13]  Tarek Omar.  Multi-pultrusion fibre composite truss systems for deployable shelters , 2008 .

[14]  R. S. Thomson,et al.  Compression, flexure and shear properties of a sandwich composite containing defects , 1999 .

[15]  L. C. Hollaway,et al.  Advanced Polymer Composites and Polymers in the Civil Infrastructure , 2001 .

[16]  Jandro L. Abot,et al.  Fabrication, testing and analysis of composite sandwich beams , 2000 .

[17]  D. Oguamanam,et al.  A quasi-2D finite element formulation for the analysis of sandwich beams , 2007 .

[18]  John W. Hutchinson,et al.  Optimal truss plates , 2001 .

[19]  Norman A. Fleck,et al.  Collapse mechanisms of sandwich beams with composite faces and a foam core, loaded in three-point bending. Part II: experimental investigation and numerical modelling , 2004 .

[20]  Bernardo Zuccarello,et al.  Experimental and numerical evaluation of the mechanical behaviour of GFRP sandwich panels , 2007 .

[21]  Thomas Keller.  Material-tailored use of FRP composites in bridge and building construction , 2007 .

[22]  H. Hahn,et al.  Flexural behavior of sandwich beams fabricated by vacuum-assisted resin transfer molding , 2003 .

[23]  A. Helba,et al.  Reinforced Concrete Structures , 1944, Nature.