Emerging Trends in Automotive Lightweighting through Novel Composite Materials

Owing to unprecedented climate change issues in recent times, global automotive industry is striving hard in developing novel functional materials to improve vehicle’s fuel efficiency. It is believed that more than a quarter of all combined greenhouse gas emissions (GHG) are associated with road transport vehicles. All these facts in association with heightened consumer awareness and energy security issues have led to automotive lightweighting as a major research theme across the globe. Almost all North American and European original equipment manufacturers (OEMs) related to automotive industry have chalked out ambitious weight reduction plans in response to stricter environmental regulations. This review entails main motives and current legislation which has prompted major OEMs to have drastic measures in bringing down vehicle weight to suggested limits. Also discussed are recent advances in developing advanced composites, and cellulose-enabled light weight automotive composites with special focus on research efforts of Center for Biocomposites and Biomaterials Processing (CBBP), University of Toronto, Canada.

[1]  M. Sain,et al.  Characterization of soda hardwood lignin and the formation of lignin fibers by melt spinning , 2013 .

[2]  Xiao Hu,et al.  Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites , 2000 .

[3]  Vikas Khanna,et al.  Carbon nanofiber polymer composites: evaluation of life cycle energy use. , 2009, Environmental science & technology.

[4]  B. Obama,et al.  Office of the Press Secretary , 2009 .

[5]  Paul E Geck.  Automotive Lightweighting Using Advanced High-Strength Steels , 2014 .

[6]  Amanda Jacob,et al.  Carbon fibre and cars – 2013 in review , 2014 .

[7]  Sujit Das.  Life cycle assessment of carbon fiber-reinforced polymer composites , 2011 .

[8]  Mohini Sain,et al.  Recycling of Paper Mill Biosolids: A Review on Current Practices and Emerging Biorefinery Initiatives , 2015 .

[9]  J. Tjong,et al.  Hybrid biocomposites with enhanced thermal and mechanical properties for structural applications , 2015 .

[10]  H. Choi,et al.  A Review: Natural Fiber Composites Selection in View of Mechanical, Light Weight, and Economic Properties , 2015 .

[11]  Kap Seung Yang,et al.  Preparation of carbon fibers from a lignin copolymer with polyacrylonitrile , 2012 .

[12]  D. Grewell,et al.  Bio-renewable precursor fibers from lignin/polylactide blends for conversion to carbon fibers , 2014 .

[13]  Richard Stewart,et al.  Lightweighting the automotive market , 2009 .

[14]  Gregg Marland,et al.  Global, Regional, and National Fossil-Fuel CO2 Emissions, 1751 - 2007 (Version 2010) , 2010 .

[15]  Lynette W. Cheah,et al.  Cars on a diet : the material and energy impacts of passenger vehicle weight reduction in the U.S. , 2010 .

[16]  K. Evans,et al.  Economical carbon and cellulosic sheet moulding compounds for semi- and non-structural applications , 2015 .

[17]  Thomas Vietor,et al.  Future Trends in the Development of Vehicle Bodies Regarding Lightweight and Cost , 2014 .

[18]  M. Sain,et al.  Performance of Injection Molded Natural Fiber - Hybrid Thermoplastic Composites for Automotive Structural Applications , 2006 .

[19]  Chun H. Wang,et al.  Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structures , 2012 .

[20]  Adam Ragatz,et al.  Navistar eStar Vehicle Performance Evaluation - Cumulative; Energy Efficiency & Renewable Energy (EERE), Vehicle Technologies Office (VTO) , 2013 .

[21]  S. Arabia,et al.  Development of Novel Wax-enabled Thermoplastic Starch Blends and Their Morphological, Thermal and Environmental Properties , 2014 .