Simulation study on dynamic heat transfer performance of PCM-filled glass window with different thermophysical parameters of phase change material

Abstract In order to determine the effects of phase change material's (PCM) thermophysical parameters on the dynamic heat transfer progress of PCM-filled glass window (PCMW), both the numerical model and experimental setup were established. The experimental measurements in typical sunny and rainy summer days with different windows were conducted. Results indicated that when PCM (paraffin MG29) was used in PCMW, the thermal insulation of PCMW and peak cooling load shifting effects were remarkable in the hot summer and cold winter area of China, and the heat entered the building through the PCMW reduced by 18.3% in the typical sunny summer day. Then the effects of PCM's thermophysical parameters on dynamic heat transfer performance of PCMW were investigated by FLUENT based on experimental measurements. The simulated results concluded that the thermal insulation and load shifting effects of PCMW enhanced with the increasing fusion latent heat of PCM and the optimal melting temperature of PCM applied in PCMW was 25–31 °C. Moreover, minimizaiton of temperature difference between liquid phase and solid phase could improve PCMW thermal performance.

[1]  Eric Masanet,et al.  Regional performance targets for transparent near-infrared switching electrochromic window glazings , 2013 .

[2]  Valentina Serra,et al.  Improving thermal comfort conditions by means of PCM glazing systems , 2013 .

[3]  Takahiko Miyazaki,et al.  Energy savings of office buildings by the use of semi-transparent solar cells for windows , 2005 .

[4]  Jianing Zhao,et al.  Optimal design for a dual-airflow window for different climate regions in China , 2010 .

[5]  Zhang Lin,et al.  Innovative solar windows for cooling-demand climate , 2010 .

[6]  Valentina Serra,et al.  Experimental assessment of the thermal behaviour of a PCM glazing , 2010 .

[7]  Hong Ye,et al.  The energy saving index and the performance evaluation of thermochromic windows in passive buildings , 2014 .

[8]  Louis Gosselin,et al.  Integration of smart windows into building design for reduction of yearly overall energy consumption and peak loads , 2012 .

[9]  Panayiotis A. Kyriacou,et al.  Experimental and numerical investigations of the optical and thermal aspects of a PCM-glazed unit , 2013 .

[10]  Matthias Haase,et al.  A numerical model to evaluate the thermal behaviour of PCM glazing system configurations , 2012 .

[11]  Kamal Abdel Radi Ismail,et al.  PCM glazing systems , 1997 .

[12]  Kamal Abdel Radi Ismail,et al.  Thermally effective windows with moving phase change material curtains , 2001 .

[13]  Peng Xu,et al.  Case study: Energy savings from solar window film in two commercial buildings in Shanghai , 2012 .

[14]  Francesco Goia.  Thermo-physical behaviour and energy performance assessment of PCM glazing system configurations: A numerical analysis , 2012 .

[15]  Xiaosong Zhang,et al.  Comparative study on the dynamic heat transfer characteristics of PCM-filled glass window and hollow glass window , 2014 .