Contour error and control algorithm in CNC machining tool

A contour error controller is put for ward to analyze and solve accuracy problem of the high-speed CNC machining. In this paper, a three-dimensional contour error model base on the definition of space contour error model is built and analyzed. And the contour error feedback control algorithms are adopted to modify the influence of the contour error. Simulation and experimental results show that the proposed approaches can effectively reduce the contour error for multi-axis following task.

[1]  Tsung-Ching Lin,et al.  Cross-coupled precompensation method for the contouring accuracy of computer numerically controlled machine tools , 1997 .

[2]  Yoram Koren,et al.  CNC INTERPOLATORS: ALGORITHMS AND ANALYSIS , 1993 .

[3]  Chih-Ching Lo,et al.  Tangential-Contouring Controller for Biaxial Motion Control , 1999 .

[4]  K. C. Lin,et al.  Contour Controller Design for Two-Dimensional Stage System with Friction , 2006 .

[5]  Naoki Uchiyama,et al.  The effectiveness of contouring control and a design for three-dimensional machining , 2009 .

[6]  Chin-Sheng Chen,et al.  Position command shaping control in a retrofitted milling machine , 2006 .

[7]  Chung-Wei Cheng,et al.  Design and implementation of a real-time NURBS surface interpolator , 2005 .

[8]  Yusuf Altintas,et al.  High speed contouring control strategy for five-axis machine tools , 2010 .

[9]  Yoram Koren,et al.  Cross-Coupled Biaxial Computer Control for Manufacturing Systems , 1980 .

[10]  Jih-Hua Chin,et al.  Improving contour accuracy by Fuzzy-logic enhanced cross-coupled precompensation method , 2004 .

[11]  Sam-Sang You,et al.  Precise position synchronous control of multi-axis servo system , 2008 .

[12]  Naoki Uchiyama,et al.  Discrete-time robust adaptive multi-axis control for feed drive systems , 2009 .

[13]  Ming-Yang Cheng,et al.  Motion Controller Design for Contour-Following Tasks Based on Real-Time Contour Error Estimation , 2007, IEEE Transactions on Industrial Electronics.

[14]  Masayoshi Tomizuka,et al.  Contouring control of machine tool feed drive systems: a task coordinate frame approach , 2001, IEEE Trans. Control. Syst. Technol..