Implication of scaling hierarchy associated with nonequilibrium: field and particulate

Abstract The advent of nanotechnology has necessitated a better understanding of how material microstructure changes at the atomic level would affect the macroscopic properties that control the performance. Such a challenge has uncovered many phenomena that were not previously understood and taken for granted. Among them are the basic foundation of dislocation theories which are now known to be inadequate. Simplifying assumptions invoked at the macroscale may not be applicable at the micro- and/or nanoscale. There are implications of scaling hierrachy associated with inhomegeneity and nonequilibrium of physical systems. What is taken to be homogeneous and equilibrium at the macroscale may not be so when the physical size of the material is reduced to microns. These fundamental issues cannot be dispensed at will for the sake of convenience because they could alter the outcome of predictions. Even more unsatisfying is the lack of consistency in modeling physical systems. This could translate to the inability for identifying the relevant manufacturing parameters and rendering the end product unpractical because of high cost. Advanced composite and ceramic materials are cases in point. Discussed are potential pitfalls for applying models at both the atomic and continuum levels. No encouragement is made to unravel the truth of nature. Let it be partiuclates, a smooth continuum or a combination of both. The present trend of development in scaling tends to seek for different characteristic lengths of material microstructures with or without the influence of time effects. Much will be learned from atomistic simulation models to show how results could differ as boundary conditions and scales are changed. Quantum mechanics, continuum and cosmological models provide evidence that no general approach is in sight. Of immediate interest is perhaps the establishment of greater precision in terminology so as to better communicate results involving multiscale physical events.

[1]  G. Sih,et al.  The strain energy density failure criterion applied to notched elastic solids , 1975 .

[2]  S. Ohr.  An electron microscope study of crack tip deformation and its impact on the dislocation theory of fracture , 1985 .

[3]  G. Sih.  Thermomechanics of solids: nonequilibrium and irreversibility , 1988 .

[4]  C. Chao,et al.  Thermal/mechanical damage of 6061-T6 aluminum tensile specimen , 1987 .

[5]  M. F. Kanninen,et al.  Inelastic Behavior of Solids , 1970, Science.

[6]  G. Sih.  Mechanics of fracture initiation and propagation , 1990 .

[7]  Mark F. Horstemeyer,et al.  Atomistic Finite Deformation Simulations: A Discussion on Length Scale Effects in Relation to Mechanical Stresses , 1999 .

[8]  R. S. Hawke,et al.  MAGRAC--A railgun simulation program , 1980 .

[9]  G. Sih,et al.  Damage analysis of tetragonal perovskite structure ceramics implicated by asymptotic field solutions and boundary conditions , 2002 .

[10]  D. Tzou,et al.  Heating preceded by cooling ahead of crack: Macrodamage free zone , 1986 .

[11]  G. Sih,et al.  Mesofracture mechanics: a necessary link , 2001 .

[12]  C. Chao,et al.  Scaling of size/time/temperature — Part 2: Progressive damage in uniaxial compressive specimen , 1989 .

[13]  G. Sih,et al.  Nonequilibrium thermal/mechanical response of 6061 aluminum alloy at elevated temperature , 1989 .

[14]  G. Sih,et al.  Time dependent damage in half-plane part 1: Displacement loading , 1988 .

[15]  G. Sih,et al.  Fracture Mechanics Methodology , 1984 .

[16]  G. Sih.  Strain-energy-density factor applied to mixed mode crack problems , 1974 .

[17]  J. B. Adams,et al.  Atomic-level computer simulation , 1994 .

[18]  G. C. Sih,et al.  Failure initiation in unnotched specimens subjected to monotonic and cyclic loading , 1984 .

[19]  Jehuda Tirosh,et al.  A semi-automated in-plane loader for materials testing , 1983 .

[20]  John G. Michopoulos,et al.  Characterization of strain-induced damage in composites based on the dissipated energy density part I. Basic scheme and formulation , 1995 .

[21]  Strain energy density and surface layer energy for blunt cracks or notches , 1991 .

[22]  G. C. Sih,et al.  Secondary temperature fluctuation in cracked 1020 steel specimen loaded monotonically , 1987 .

[23]  E. Chulkov,et al.  Vibrations on Cu surfaces covered with Ni monolayer , 1999 .

[24]  D. Tzou,et al.  Irreversibility and damage of SAFC-40R steel specimen in uniaxial tension , 1987 .

[25]  A. A. Griffith.  The Phenomena of Rupture and Flow in Solids , 1921 .

[26]  H. Noguchi,et al.  A combined method of molecular dynamics with micromechanics improved by moving the molecular dynamics region successively in the simulation of elastic--plastic crack propagation , 1998 .

[27]  G. C. Sih,et al.  Fracture mechanics of engineering structural components , 1984 .

[28]  G. Sih,et al.  Application of the Strain Energy Density Fracture Criterion to Dynamic Crack Problems , 1974 .

[29]  Niels Grønbech-Jensen,et al.  Molecular-dynamics simulations of fracture: An overview of system size and other effects , 1995 .

[30]  William Thomson,et al.  Mathematical and physical papers , 1880 .

[31]  G. C. Sih,et al.  Methods of analysis and solutions of crack problems : recent developments in fracture mechanics : theory and methods of solving crack problems , 1973 .

[32]  H. Noguchi,et al.  A method of seamlessly combining a crack tip molecular dynamics enclave with a linear elastic outer domain in simulating elastic–plastic crack advance , 1997 .

[33]  G. C. Sih,et al.  A special theory of crack propagation , 1991 .

[34]  G. Sih.  Initial damage states of hypervelocity impact for tungsten projectile on aluminum target , 1990 .

[35]  C. M. Fowler,et al.  Results of railgun experiments powered by magnetic flux compression generators , 1982 .

[36]  G. C. Sih,et al.  Elastodynamic Crack Problems , 1978 .

[37]  D. Tzou,et al.  Thermal/mechanical interaction of subcritical crack growth in tensile specimen , 1988 .

[38]  E. Chulkov,et al.  Vibrational states on vicinal surfaces of Al, Ag, Cu and Pd , 1998 .