Handling Qualities Flight Test Assessment of a Business Jet N zU P-β Fly-By-Wire Control System

Fly-by-wire control laws for a business jet were developed and a handling qualities assessment flight test was conducted on the Calspan Variable Stability System Learjet-25. The control laws, which provide an nzu-command response type in the longitudinal axis and a p-β-command response type in the lateral/directional axes, were optimized to meet Level 1 requirements for a comprehensive set of stability, handling qualities, and performance specifications. The control laws were evaluated in flight by USAF Test Pilot School and Textron Aviation test pilots using a series of handling qualities demonstration maneuvers. These included pitch and roll capture and tracking tasks and an offset landing task. Quantitative performance metrics were collected, in addition to pilot handling qualities ratings and comments. Several modifications were made to the control laws based on initial pilot comments and ratings. The final results show that the optimized fly-by-wire control laws provided assigned Level 1 handling qualities for discrete tracking and offset landing tasks.

[1]  Naira Hovakimyan,et al.  A Handling Qualities Assessment of a Business Jet Augmented with an L1 Adaptive Controller , 2011 .

[2]  Mark B. Tischler,et al.  Piloted Simulation Handling Qualities Assessment of a Business Jet Fly-By-Wire Flight Control System , 2015 .

[3]  David G. Mitchell,et al.  Proposed Incorporation of Mission-Oriented Flying Qualities into MIL-STD-1797A. , 1994 .

[4]  John Hodgkinson.  Control design methods for good flying qualities , 2009 .

[5]  Mark B. Tischler,et al.  Aircraft and Rotorcraft System Identification, Second Edition , 2012 .

[6]  Mark B. Tischler,et al.  A Model Stitching Architecture for Continuous Full Flight-Envelope Simulation of Fixed-Wing Aircraft and Rotorcraft from Discrete Point Linear Models , 2016 .

[7]  David H. Klyde,et al.  Approach and Landing Flight Evaluation of Smart-Cue and Smart-Gain Concepts , 2008 .

[8]  Mark B. Tischler,et al.  Lateral/Directional Control Law Design and Handling Qualities Optimization for a Business Jet Flight Control System , 2013 .

[9]  George E. Cooper,et al.  The use of pilot rating in the evaluation of aircraft handling qualities , 1969 .

[10]  Mark B. Tischler,et al.  Longitudinal Control Law Design and Handling Qualities Optimization for a Business Jet Flight Control System , 2012 .

[11]  Frank L. Lewis,et al.  Aircraft Control and Simulation , 1992 .

[12]  M Christopher Cotting,et al.  Development and Validation of a Flight-Identified Full-Envelope Business Jet Simulation Model Using a Stitching Architecture , 2017 .

[13]  R. W. Pratt.  Flight Control Systems , 2000 .

[14]  Christina M. Ivler,et al.  Handling-Qualities Optimization and Trade-offs in Rotorcraft Flight Control Design , 2008 .

[15]  David G. Mitchell,et al.  Effects of Pitch Instantaneous Center of Rotation Location on Flying Qualities , 2002 .