Properties of wood-plastic composites (WPCs) reinforced with extracted and delignified wood flour

Abstract The water sorption and mechanical properties of wood-plastic composites (WPCs) made of extracted and delignified wood flour (WF) has been investigated. WF was prepared by extraction with the solvent systems toluene/ethanol (TE), acetone/water (AW), and hot water (HW), and its delignification was conducted by means of sodium chlorite/acetic acid (AA) solution. A 24 full-factorial experimental design was employed to determine the effects of treatments and treatment combinations. WPCs were prepared with high-density polyethylene (HDPE) and treated WF was prepared by means of extrusion followed by injection molding, and the water absorption characteristics and mechanical properties of the products were evaluated. WPCs produced with extracted WF had lower water absorption rates and better mechanical properties than those made of untreated WF. WPCs containing delignified WF had higher water absorption rates and improved mechanical performance compared with those made of untreated WF.

[1]  R. Ibach,et al.  Thermal Properties of Extracted and Delignified Wood Flour for use in Wood-Plastic Composites , 2013 .

[2]  E. Lowell,et al.  Hot water extracted wood fiber for production of wood plastic composites (WPCs) , 2013 .

[3]  T. Rials,et al.  Effects of hemicellulose extraction on properties of wood flour and wood–plastic composites , 2012 .

[4]  A. Ashori,et al.  Effects of nanoclay and coupling agent on the physico-mechanical, morphological, and thermal properties of wood flour/polypropylene composites , 2011 .

[5]  P. Perré,et al.  Effects of fiber characteristics on the physical and mechanical properties of wood plastic composites , 2009 .

[6]  D. Harper,et al.  Effect of Extractives on Water Sorption and Durability of Wood-Plastic Composites , 2009 .

[7]  A. McDonald,et al.  Wood Modification Effects on Weathering of HDPE-Based Wood Plastic Composites , 2009 .

[8]  M. Meincken,et al.  The effect of wood extractives on the thermal stability of different wood-LLDPE composites , 2009 .

[9]  N. Stark,et al.  Improving the Color Stability of Wood-Plastic Composites Through Fiber Pre-Treatment , 2008 .

[10]  D. Gardner,et al.  Wood plastic composites manufactured from hot water extracted wood . Part I : Mechanical evaluation , 2008 .

[11]  D. Kamdem,et al.  Influence of wood extractives on moisture sorption and wettability of red oak (Quercus rubra), black cherry (Prunus serotina), and red pine (Pinus resinosa) , 2007 .

[12]  H. Thoemen,et al.  Effects of material parameters on the diffusion and sorption properties of wood‐flour/polypropylene composites , 2007 .

[13]  N. Stark.  Effect of weathering cycle and manufacturing method on performance of wood flour and high-density polyethylene composites†‡ , 2006 .

[14]  A. Błędzki,et al.  A comparison of compounding processes and wood type for wood fibre—PP composites , 2005 .

[15]  Qinglin Wu,et al.  Wood‐fiber/high‐density‐polyethylene composites: Coupling agent performance , 2005 .

[16]  J. Simonsen,et al.  Effect of extractives on the flexural properties of wood/plastic composites , 2004 .

[17]  S. Kaliaguine,et al.  Surface analysis of explosion pulps by ESCA , 1993, Wood Science and Technology.

[18]  Frederick F. Wangaard,et al.  The effect of extractives on water-vapor sorption by wood , 1967, Wood Science and Technology.

[19]  R. Rowell,et al.  Swelling of wood , 1934, Wood Science and Technology.

[20]  Douglas J. Gardner,et al.  Fundamental aspects of wood as a component of thermoplastic composites , 2003 .

[21]  P. Garriga,et al.  Structural analysis of photodegraded wood by means of FTIR spectroscopy , 2003 .

[22]  R. Rowlands,et al.  Effects of wood fiber characteristics on mechanical properties of wood/polypropylene composites , 2003 .

[23]  R. Rowell,et al.  Characterization and Factors Effecting Fiber Properties , 2000 .

[24]  D. Kamdem,et al.  Wettability of extracted southern pine , 1999 .

[25]  B. Kokta,et al.  Thermoplastic composties of polystyrene: Effect of different wood species on mechanical properties , 1989 .