Predictions of aneurysm formation in distensible tubes: Part A—Theoretical background to alternative approaches

Abstract Pressurised distensible tubes are subject to aneurysms. Aneurysm inception will take place at a location along the tube when a critical pressure, relative to tube wall thickness at that location, is reached. Parents will recognise the existence of critical pressure when endeavouring to inflate a party balloon. Another example of aneurysm is the thoracic aortic aneurysm corresponding to permanent dilation of the aorta in such proportions that it can be life threatening. Corrective procedures for aortic aneurysms involve the introduction of stiff materials to prevent aneurysm. Similarly in a proposed distensible tube based wave energy device aneurysm inception is partially controlled through the use of alternative longitudinal strips of inextensible material and appropriate rubber strips. Here we consider distensible tubes made of one material. Having reviewed the aneurysm based literature some inconsistencies were observed between the material properties used in a non-linear finite element analysis and the material properties of the specimen used to provide experimental measurements for comparison. To appreciate the inconsistencies the authors decided to investigate aneurysm development using both non-linear finite element analyses and distinct alternative formulations and solution techniques. Rather than restrict strain-energy function to a subset of Neo-Hookean, Mooney–Rivlin and Ogden forms, the authors have implemented several alternative strain-energy models in parallel, also exploring for the first time the impact of using different combinations of uniaxial, equi-biaxial and pure shear experimental data for different rubbers. This paper addresses the needs (necessary considerations, such as the Valanis–Landel hypothesis, Maxwell equal area rule and data selection criteria) for a realistic approach to modelling a distensible tube to provide predictions of critical pressure. In common with all other cited references a static analysis is used.

[1]  Manuel Doblaré,et al.  Mechanical stresses in abdominal aortic aneurysms: influence of diameter, asymmetry, and material anisotropy. , 2008, Journal of biomechanical engineering.

[2]  K. Bathe,et al.  A finite element formulation for nonlinear incompressible elastic and inelastic analysis , 1987 .

[3]  Michael T Walsh,et al.  Vessel asymmetry as an additional diagnostic tool in the assessment of abdominal aortic aneurysms. , 2009, Journal of vascular surgery.

[4]  Xiaoping Guo,et al.  Large Deformation Analysis for a Cylindrical Hyperelastic Membrane of Rubber-Like Material under Internal Pressure , 2001 .

[5]  Jay D. Humphrey,et al.  Computer Methods in Membrane Biomechanics , 1998 .

[6]  O. Yeoh.  Some Forms of the Strain Energy Function for Rubber , 1993 .

[7]  Xiaoping Guo,et al.  KINEMATIC MODELING OF FINITE AXISYMMETRIC INFLATION FOR AN ARBITRARY POLYMERIC MEMBRANE OF REVOLUTION , 2001 .

[8]  H. Alexander,et al.  A constitutive relation for rubber-like materials☆ , 1968 .

[9]  J Swedenborg,et al.  Biomechanical rupture risk assessment of abdominal aortic aneurysms: model complexity versus predictability of finite element simulations. , 2010, European journal of vascular and endovascular surgery : the official journal of the European Society for Vascular Surgery.

[10]  Ray W. Ogden,et al.  Nonlinear Elastic Deformations , 1985 .

[11]  S. Timoshenko.  History of strength of materials , 1953 .

[12]  Long Chen.  FINITE ELEMENT METHOD , 2013 .

[13]  K. Y. Sze,et al.  Popular benchmark problems for geometric nonlinear analysis of shells , 2004 .

[14]  Satya N. Atluri,et al.  A simple method to follow post-buckling paths in finite element analysis , 1995 .

[15]  J. Shi,et al.  Computing critical points and secondary paths in nonlinear structural stability analysis by the finite element method , 1996 .

[16]  Barry J Doyle,et al.  Use of the photoelastic method and finite element analysis in the assessment of wall strain in abdominal aortic aneurysm models. , 2012, Journal of biomechanics.

[17]  Yannis Papaharilaou,et al.  A decoupled fluid structure approach for estimating wall stress in abdominal aortic aneurysms. , 2007, Journal of biomechanics.

[18]  Rita G. Toscano,et al.  A shell element for finite strain analyses: hyperelastic material models , 2007 .

[19]  On the stability of finitely deformed elastic membranes , 1972 .

[20]  M L Raghavan,et al.  Toward a biomechanical tool to evaluate rupture potential of abdominal aortic aneurysm: identification of a finite strain constitutive model and evaluation of its applicability. , 2000, Journal of biomechanics.

[21]  P. J. Prendergast,et al.  Elastic Behavior of Porcine Coronary Artery Tissue Under Uniaxial and Equibiaxial Tension , 2004, Annals of Biomedical Engineering.

[22]  Paulo B. Gonçalves,et al.  Finite deformations of an initially stressed cylindrical shell under internal pressure , 2008 .

[23]  Stelios Kyriakides,et al.  Hydroforming of anisotropic aluminum tubes: Part II analysis , 2011 .

[24]  H. Kawai,et al.  Experimental survey of the strain energy density function of isoprene rubber vulcanizate , 1981 .

[25]  Klaus-Jürgen Bathe,et al.  On the stability of mixed finite elements in large strain analysis of incompressible solids , 1997 .

[26]  Ray W. Ogden,et al.  Bifurcation of inflated circular cylinders of elastic material under axial loading—II. Exact theory for thick-walled tubes , 1979 .

[27]  L. Watson,et al.  A comparison of three algorithms for tracing nonlinear equilibrium paths of structural systems , 2000 .

[28]  K. Liub,et al.  Post-bifurcation analysis of a thin-walled hyperelastic tube under inflation , 2008 .

[29]  L. Herrmann.  Elasticity Equations for Incompressible and Nearly Incompressible Materials by a Variational Theorem , 1965 .

[30]  Eugenio Oñate,et al.  Recent developments in finite element analysis , 1994 .

[31]  William Sutherland,et al.  The Elasticity of Rubber Balloons and Hollow Viscera , 1909 .

[32]  Alan N. Gent,et al.  Elastic instabilities in rubber , 2005 .

[33]  P. Wriggers.  Nonlinear Finite Element Methods , 2008 .

[34]  David R. Kincaid,et al.  Numerical mathematics and computing , 1980 .

[35]  J. Reddy.  An introduction to nonlinear finite element analysis , 2004 .

[36]  P. Sharma.  Mechanics of materials. , 2010, Technology and health care : official journal of the European Society for Engineering and Medicine.

[37]  Stelios Kyriakides,et al.  On the inflation of a long elastic tube in the presence of axial load , 1990 .

[38]  Klaus-Jürgen Bathe,et al.  The inf–sup condition and its evaluation for mixed finite element methods , 2001 .

[39]  Eduardo N. Dvorkin,et al.  On the convergence of incompressible finite element formulations , 2001 .

[40]  Mohamed S. Gadala,et al.  Alternative methods for the solution of hyperelastic problems with incompressibility , 1992 .

[41]  D. M. Haughton,et al.  Post-bifurcation of perfect and imperfect spherical elastic membranes , 1980 .

[42]  Madhavan L Raghavan,et al.  Biomechanical failure properties and microstructural content of ruptured and unruptured abdominal aortic aneurysms. , 2011, Journal of biomechanics.

[43]  L. Treloar.  The Physics of Rubber Elasticity (J. Meixner) , 1959 .

[44]  J. E. Adkins,et al.  Large elastic deformations and non-linear continuum mechanics , 1962 .

[45]  Eric P. Kasper,et al.  A mixed-enhanced strain method , 2000 .

[46]  R. Rivlin.  Large Elastic Deformations of Isotropic Materials , 1997 .

[47]  J. N. Reddy,et al.  An Introduction to CONTINUUM MECHANICS with Applications , 2007 .

[48]  Harold Alexander,et al.  Tensile instability of initially spherical balloons , 1971 .

[49]  R. Shield.  On the stability of finitely deformed elastic membranes , 1971 .

[50]  Stelios Kyriakides,et al.  The initiation and propagation of a localized instability in an inflated elastic tube , 1991 .

[51]  W. W. Feng,et al.  On Axisymmetrical Deformations of Nonlinear Membranes , 1970 .

[52]  Alan Muhr,et al.  Constitutive Models for Rubber , 1999 .

[53]  A. Needleman.  Inflation of spherical rubber balloons , 1977 .

[54]  R. Ogden.  Large deformation isotropic elasticity – on the correlation of theory and experiment for incompressible rubberlike solids , 1972, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[55]  W. Kuhn,et al.  Dependence of the average transversal on the longitudinal dimensions of statistical coils formed by chain molecules , 1946 .

[56]  Nam-Ho Kim.  Introduction to Nonlinear Finite Element Analysis , 2014 .

[57]  Wen-Bin Shangguan,et al.  Modelling of a hydraulic engine mount with fluid–structure interaction finite element analysis , 2004 .

[58]  L. Treloar,et al.  The elasticity of a network of long-chain molecules.—III , 1943 .

[59]  Cv Clemens Verhoosel,et al.  Non-Linear Finite Element Analysis of Solids and Structures , 1991 .

[60]  B Skallerud,et al.  On modelling and analysis of healthy and pathological human mitral valves: two case studies. , 2010, Journal of the mechanical behavior of biomedical materials.

[61]  D. Vorp,et al.  Biomechanics of abdominal aortic aneurysm. , 2007, Journal of biomechanics.

[62]  E. Riks.  An incremental approach to the solution of snapping and buckling problems , 1979 .

[63]  Paulo B. Gonçalves,et al.  Finite deformations of cylindrical membrane under internal pressure , 2006 .

[64]  John W. Hutchinson,et al.  On the Propagation of Bulges and Buckles , 1984 .

[65]  L. E. Malvern.  Introduction to the mechanics of a continuous medium , 1969 .

[66]  M. Boyce,et al.  A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials , 1993 .

[67]  J. Dormand,et al.  A family of embedded Runge-Kutta formulae , 1980 .

[68]  D. Malkus,et al.  Mixed finite element methods—reduced and selective integration techniques: a unification of concepts , 1990 .

[69]  Grant E. Hearn,et al.  Predictions of aneurysm formation in distensible tubes: part B - application and comparison of alternative approaches , 2013 .

[70]  W. Wall,et al.  A Comparison of Diameter, Wall Stress, and Rupture Potential Index for Abdominal Aortic Aneurysm Rupture Risk Prediction , 2010, Annals of Biomedical Engineering.

[71]  Klaus-Jürgen Bathe,et al.  Benchmark problems for incompressible fluid flows with structural interactions , 2007 .

[72]  H. Alexander.  The tensile instability of an inflated cylindrical membrane as affected by an axial load , 1971 .

[73]  F. Auricchio,et al.  Mechanical behavior of coronary stents investigated through the finite element method. , 2002, Journal of biomechanics.

[74]  E. Sacco,et al.  Finite-element Analysis of a Stenotic Artery Revascularization Through a Stent Insertion , 2001 .

[75]  E. H. Twizell,et al.  Non-linear optimization of the material constants in Ogden's stress-deformation function for incompressinle isotropic elastic materials , 1983, The Journal of the Australian Mathematical Society. Series B. Applied Mathematics.

[76]  B. Reddy.  A DEFORMATION-THEORY ANALYSIS OF THE BIFURCATION OF PRESSURISED THICK-WALLED CYLINDERS , 1982 .

[77]  R. Landel,et al.  The Strain‐Energy Function of a Hyperelastic Material in Terms of the Extension Ratios , 1967 .

[78]  A. Mallock,et al.  II. Note on the instability of India-rubber tubes and balloons when distended by fluid pressure , 1891, Proceedings of the Royal Society of London.

[79]  Michel Fortin,et al.  Mixed and Hybrid Finite Element Methods , 2011, Springer Series in Computational Mathematics.

[80]  K. Bathe,et al.  FINITE ELEMENT FORMULATIONS FOR LARGE DEFORMATION DYNAMIC ANALYSIS , 1975 .

[81]  H. Struchtrup,et al.  Inflating a Rubber Balloon , 2002 .

[82]  G. F. Moita,et al.  The post-critical analysis of axisymmetric hyper-elastic membranes by the finite element method , 1996 .

[83]  L. Treloar,et al.  Stress-strain data for vulcanised rubber under various types of deformation , 1944 .

[84]  R. Rivlin.  Large elastic deformations of isotropic materials IV. further developments of the general theory , 1948, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[85]  Gerhard A. Holzapfel,et al.  Nonlinear Solid Mechanics: A Continuum Approach for Engineering Science , 2000 .

[86]  L. J. Hart-Smith,et al.  Elasticity parameters for finite deformations of rubber-like materials , 1966 .

[87]  C. Horgan,et al.  Elastic instabilities for strain-stiffening rubber-like spherical and cylindrical thin shells under inflation , 2007 .

[88]  L. Treloar,et al.  The properties of rubber in pure homogeneous strain , 1975 .

[89]  K. Bathe.  Finite Element Procedures , 1995 .