Control and power management of a hybrid stationary fuel cell system

This paper proposes robust control and power management strategies for a 6kW stationary fuel cell hybrid power system. The system consists of two 3kW PEMFC modules, a Li-Fe battery set and electrical components to form a parallel hybrid power system that is designed for telecom base stations to supply uninterruptible power during emergency power failures. The study is carried out in three steps: the PEMFC modules control, power management, and system integration. First, we apply robust control to regulate the hydrogen flow rates of the PEMFC modules to increase system stability, performance, and efficiency. Second, we design a parallel power train that consists of two PEMFC modules and one Li-Fe battery set for uninterruptible power supply (UPS) requirement. When the main power is shut down, the Li-Fe battery will activate PEMFC modules. Then the PEMFC modules provide steady power at low current loadings. At high loading, both PEMFC modules and the Li-Fe battery set will simultaneously provide electricity. Lastly, we integrate the system for experimental verification. Based on the results, the proposed robust control and power management are deemed effective in improving stability, performance and efficiency of the stationary power system.

[1]  Scott E. Grasman,et al.  Strategies for stationary and portable fuel cell markets , 2011 .

[2]  Fu-Cheng Wang,et al.  Multivariable Robust Control for a 500W Self-Humidified PEMFC System , 2011, Eur. J. Control.

[3]  J. Javier Brey,et al.  Design of control systems for portable PEM fuel cells , 2007 .

[4]  H. Gorgun.  Dynamic modelling of a proton exchange membrane (PEM) electrolyzer , 2006 .

[5]  T. Georgiou,et al.  Optimal robustness in the gap metric , 1989, Proceedings of the 28th IEEE Conference on Decision and Control,.

[6]  Fortunato Migliardini,et al.  Experimental analysis and management issues of a hydrogen fuel cell system for stationary and mobile application , 2007 .

[7]  M. Ouyang,et al.  Modeling and control of air stream and hydrogen flow with recirculation in a PEM fuel cell system - I. Control-oriented modeling , 2006 .

[8]  Fu-Cheng Wang,et al.  Multivariable robust PID control for a PEMFC system , 2010 .

[9]  Keith Glover,et al.  A loop-shaping design procedure using H/sub infinity / synthesis , 1992 .

[10]  Fu-Cheng Wang,et al.  Multivariable robust control of a proton exchange membrane fuel cell system , 2008 .

[11]  J. Suykens,et al.  Subspace identification of Hammerstein systems using least squares support vector machines , 2005 .

[12]  Fu-Cheng Wang,et al.  Design and implementation of fixed-order robust controllers for a proton exchange membrane fuel cell system , 2009 .

[13]  Jorge L. Duarte,et al.  Line-Interactive UPS Using a Fuel Cell as the Primary Source , 2008, IEEE Transactions on Industrial Electronics.

[14]  Søren Knudsen Kær,et al.  Directly connected series coupled HTPEM fuel cell stacks to a Li-ion battery DC bus for a fuel cell electrical vehicle , 2008 .

[15]  Yuedong Zhan,et al.  Intelligent uninterruptible power supply system with back-up fuel cell/battery hybrid power source , 2008 .

[16]  Woojin Choi,et al.  Fuel-cell powered uninterruptible power supply systems: Design considerations , 2006 .

[17]  Bart De Moor,et al.  N4SID: Subspace algorithms for the identification of combined deterministic-stochastic systems , 1994, Autom..

[18]  Claire H. Woo,et al.  PEM fuel cell current regulation by fuel feed control , 2007 .

[19]  E. Armstrong.  Robust controller design for flexible structures using normalized coprime factor plant descriptions , 1993 .

[20]  Fu-Cheng Wang,et al.  System identification and robust control of a portable proton exchange membrane full-cell system , 2007 .