Nanoscale Surface Modification to Suppress Capacity Fade of Ni-Rich Layered Oxide Material at High cut-off Voltage

[1]  G. Shao,et al.  In-plane grain boundary induced defect state in hierarchical NiCo-LDH and effect on battery-type charge storage , 2022, Nano Research.

[2]  Haosen Fan,et al.  Rational design of heterostructured bimetallic sulfides (CoS2/NC@VS4) with VS4 nanodots decorated on CoS2 dodecahedron for high-performance sodium and potassium ion batteries. , 2022, Journal of colloid and interface science.

[3]  Qingyu Li,et al.  Mg,Ti-base surface integrated layer and bulk doping to suppress lattice oxygen evolution of Ni-rich cathode material at a high cut-off voltage , 2022, Journal of Energy Chemistry.

[4]  G. Cao,et al.  Near solution-level conductivity of polyvinyl alcohol based electrolyte and the application for fully compliant Al-air battery , 2021, Chemical Engineering Journal.

[5]  Haosen Fan,et al.  2D-2D MXene/ReS2 hybrid from Ti3C2Tx MXene conductive layers supporting ultrathin ReS2 nanosheets for superior sodium storage , 2021, Chemical Engineering Journal.

[6]  Kehua Dai,et al.  Surface Modification Engineering Enabling 4.6 V Single‐Crystalline Ni‐Rich Cathode with Superior Long‐Term Cyclability , 2021, Advanced Functional Materials.

[7]  Lei Cheng,et al.  Slower capacity/voltage degradation of surface engineered LiNi0.92Co0.05Mn0.03O2 cathode for lithium-ion batteries , 2021, Applied Surface Science.

[8]  Hongcai Gao,et al.  Achieving a bifunctional conformal coating on nickel-rich cathode LiNi0.8Co0.1Mn0.1O2 with half-cyclized polyacrylonitrile , 2021 .

[9]  Xianyou Wang,et al.  Dual cationic modified high Ni-low co layered oxide cathode with a heteroepitaxial interface for high energy-density lithium-ion batteries , 2021, Chemical Engineering Journal.

[10]  Feng Wu,et al.  The mechanism of side reaction induced capacity fading of Ni-rich cathode materials for lithium ion batteries , 2021, Journal of Energy Chemistry.

[11]  Zaiping Guo,et al.  Phase Compatible NiFe2O4 Coating Tunes Oxygen Redox in Li-Rich Layered Oxide. , 2021, ACS nano.

[12]  Chunzhong Li,et al.  Bulk Mg-doping and surface polypyrrole-coating enable high-rate and long-life for Ni-rich layered cathodes , 2021 .

[13]  Xiaotu Ma,et al.  Stabilized Lithium, Manganese-Rich Layered Cathode Materials Enabled by Integrating Co-Doping and Nanocoating. , 2021, ACS applied materials & interfaces.

[14]  Weifeng Wei,et al.  Heteroepitaxial interface of layered cathode materials for lithium ion batteries , 2021 .

[15]  Qingyu Li,et al.  Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries , 2021 .

[16]  Wenguang Zhao,et al.  Enhancing the Electrochemical Performance and Structural Stability of Ni-Rich Layered Cathode Materials via Dual-Site Doping. , 2021, ACS applied materials & interfaces.

[17]  Wei Li,et al.  Titanium and fluorine synergetic modification improves the electrochemical performance of Li(Ni0.8Co0.1Mn0.1)O2 , 2021 .

[18]  Hui Huang,et al.  Reinforcing Li-rich layer cathode via artificial surface reconstruction of spinel shell containing Ni3+ , 2021, Applied Surface Science.

[19]  I. Belharouak,et al.  Valuation of Surface Coatings in High-Energy Density Lithium-ion Battery Cathode Materials , 2021 .

[20]  Fenghua Zheng,et al.  Enhanced electrochemical performance of Ni-rich cathode material by N-doped LiAlO2 surface modification for lithium-ion batteries , 2021 .

[21]  G. Shao,et al.  Dual Evolution in Defect and Morphology of Single‐Atom Dispersed Carbon Based Oxygen Electrocatalyst , 2021, Advanced Functional Materials.

[22]  A. Manthiram,et al.  Unraveling the Intricacies of Residual Lithium in High-Ni Cathodes for Lithium-Ion Batteries , 2021 .

[23]  Jian Luo,et al.  Boosting the cycling stability of Ni-rich layered oxide cathode by dry coating of ultrastable Li3V2(PO4)3 nanoparticles. , 2021, Nanoscale.

[24]  Xinyi Dai,et al.  Enhancing the High-Voltage Cycling Performance and Rate Capability of LiNi0.8Co0.1Mn0.1O2 Cathode Material by Codoping with Na and Br , 2021 .

[25]  Qingyu Li,et al.  Enhanced interfacial reaction interface stability of Ni-rich cathode materials by fabricating dual-modified layer coating for lithium-ion batteries , 2021 .

[26]  X. Sun,et al.  Surface engineering of LiNi0.8Mn0.1Co0.1O2 towards boosting lithium storage: Bimetallic oxides versus monometallic oxides , 2020 .

[27]  Qingyu Li,et al.  Stable surface construction of the Ni-rich LiNi0.8Mn0.1Co0.1O2 cathode material for high performance lithium-ion batteries , 2020, Journal of Materials Chemistry A.

[28]  W. Zhuang,et al.  Regulating the Grain Orientation and Surface Structure of Primary Particles through Tungsten Modification to Comprehensively Enhance the Performance of Nickel-Rich Cathode Materials. , 2020, ACS applied materials & interfaces.

[29]  K. Du,et al.  Sb doping and Sb2O3 coating collaboration to improve the electrochemical performance of LiNi0.5Mn0.5O2 cathode material for lithium ion batteries , 2020 .

[30]  Yelong Zhang,et al.  Stabilizing Ni‐Rich LiNi 0.92 Co 0.06 Al 0.02 O 2 Cathodes by Boracic Polyanion and Tungsten Cation Co‐Doping for High‐Energy Lithium‐Ion Batteries , 2020 .

[31]  Y. Liu,et al.  Enhanced rate performance and cycle stability of LiNi0.6Co0.2Mn0.2O2 at high cut-off voltage by Li6.1La3Al0.3Zr2O12 surface modification , 2020 .

[32]  Wenbo Liu,et al.  Al-doped ZnO (AZO) modified LiNi0.8Co0.1Mn0.1O2 and their performance as cathode material for lithium ion batteries , 2020 .

[33]  Weishan Li,et al.  Constructing a Low Impedance Interface on High-voltage LiNi0.8Co0.1Mn0.1O2 Cathode by 2,4,6-Triphenyl Boroxine as Film-forming Electrolyte Additive for Li-ion Batteries. , 2020, ACS applied materials & interfaces.

[34]  Min‐Sik Park,et al.  Bi-functional Surface Coating of LiNbO3 on High-Ni Layered Cathode Materials for Lithium Ion Batteries. , 2020, ACS applied materials & interfaces.

[35]  Z. Wen,et al.  Improved electrochemical property of Ni-rich LiNi0.6Co0.2Mn0.2O2 cathode via in-situ ZrO2 coating for high energy density lithium ion batteries , 2020, Chemical Engineering Journal.

[36]  Zhiqiang Wang,et al.  Open-Channel [011] Facet CeO2 with a Shorter Pathway of Li+ Migration as a Modification Material for LiNi0.8Co0.1Mn0.1O2 toward High-Rate Lithium-Ion Batteries , 2020 .

[37]  Bingkun Guo,et al.  Enhanced Surface Chemical and Structural Stability of Ni-Rich Cathode Materials by Synchronous Lithium-Ion Conductor Coating for Lithium-Ion Batteries. , 2020, ACS applied materials & interfaces.

[38]  Yunjiao Li,et al.  Enhancement on structural stability of Ni-rich cathode materials by in-situ fabricating dual-modified layer for lithium-ion batteries , 2019, Nano Energy.

[39]  Xianyou Wang,et al.  Tellurium Surface Doping to Enhance Structural Stability and Electrochemical Performance of Layered Ni-rich Cathode. , 2019, ACS applied materials & interfaces.

[40]  Feng Wu,et al.  High-rate structure-gradient Ni-rich cathode material for lithium-ion batteries. , 2019, ACS applied materials & interfaces.

[41]  Qingyu Li,et al.  Surface modification of Sr-doped LaMnO3 coating by spray drying on Ni-rich LiNi0.8Mn0.1Co0.1O2 cathode material for lithium-ion batteries , 2019, Journal of the Taiwan Institute of Chemical Engineers.

[42]  Yunhui Huang,et al.  Enabling high rate performance of Ni-rich layered oxide cathode by uniform titanium doping , 2019, Materials Today Energy.

[43]  Chun Zhan,et al.  Simultaneous coating and doping of a Nickel-rich cathode by an oxygen ion conductor for enhanced stability and power of Lithium ion batteries. , 2019, ACS applied materials & interfaces.

[44]  C. Korte,et al.  Operando Raman Spectroscopy Measurements of a High-Voltage Cathode Material for Lithium-Ion Batteries. , 2019, Analytical chemistry.

[45]  Siyang Liu,et al.  Revealing the Effect of Ti Doping on Significantly Enhancing Cyclic Performance at a High Cutoff Voltage for Ni-Rich LiNi0.8Co0.15Al0.05O2 Cathode , 2019, ACS Sustainable Chemistry & Engineering.

[46]  M. Winter,et al.  Surface Modification of Ni-Rich LiNi0.8Co0.1Mn0.1O2 Cathode Material by Tungsten Oxide Coating for Improved Electrochemical Performance in Lithium-Ion Batteries. , 2019, ACS applied materials & interfaces.

[47]  Xianyou Wang,et al.  Preparation and Performance of the Heterostructured Material with a Ni-Rich Layered Oxide Core and a LiNi0.5Mn1.5O4-like Spinel Shell. , 2019, ACS applied materials & interfaces.

[48]  Wei Liu,et al.  Enhancing the Electrochemical Performance of Ni-Rich Layered Oxide Cathodes by Combination of the Gradient Doping and Dual-Conductive Layers Coating , 2019, ACS Applied Energy Materials.

[49]  Bao Zhang,et al.  Enhancing High-Voltage Performance of Ni-Rich Cathode by Surface Modification of Self-Assembled NASICON Fast Ionic Conductor LiZr2(PO4)3. , 2019, ACS applied materials & interfaces.

[50]  C. Liang,et al.  A cation/anion co-doped Li1.12Na0.08Ni0.2Mn0.6O1.95F0.05 cathode for lithium ion batteries , 2019, Nano Energy.

[51]  Tian Wang,et al.  Overall structural modification of a layered Ni-rich cathode for enhanced cycling stability and rate capability at high voltage , 2019, Journal of Materials Chemistry A.

[52]  Mingyuan Ge,et al.  Simultaneously Dual Modification of Ni‐Rich Layered Oxide Cathode for High‐Energy Lithium‐Ion Batteries , 2019, Advanced Functional Materials.

[53]  Jing Zhang,et al.  Controllable formation of lithium carbonate surface phase during synthesis of nickel-rich LiNi0.9Mn0.1O2 in air and its protection role in electrochemical reaction , 2019, Journal of Alloys and Compounds.

[54]  Min‐Sik Park,et al.  Amorphous Li-Zr-O layer coating on the surface of high-Ni cathode materials for lithium ion batteries , 2018 .

[55]  P. He,et al.  Direct Visualization of the Reversible O2−/O− Redox Process in Li‐Rich Cathode Materials , 2018, Advanced materials.

[56]  Alicia Koo,et al.  Significantly improving cycling performance of cathodes in lithium ion batteries: The effect of Al 2 O 3 and LiAlO 2 coatings on LiNi 0.6 Co 0.2 Mn 0.2 O 2 , 2018 .

[57]  Zhixing Wang,et al.  Improving the cycling performance of LiNi0.8Co0.1Mn0.1O2 by surface coating with Li2TiO3 , 2016 .

[58]  K. Du,et al.  Enhancing the Thermal and Upper Voltage Performance of Ni-Rich Cathode Material by a Homogeneous and Facile Coating Method: Spray-Drying Coating with Nano-Al2O3. , 2016, ACS applied materials & interfaces.

[59]  B. Ren,et al.  Structural evolution of NM (Ni and Mn) lithium-rich layered material revealed by in-situ electrochemical Raman spectroscopic study , 2016 .

[60]  Yun‐Sung Lee,et al.  Synthesis and electrochemical performances of maricite-NaMPO4 (M = Ni, Co, Mn) electrodes for hybrid supercapacitors , 2014 .

[61]  Matt Probert,et al.  First-principles simulation: ideas, illustrations and the CASTEP code , 2002 .

[62]  Jackson,et al.  Atoms, molecules, solids, and surfaces: Applications of the generalized gradient approximation for exchange and correlation. , 1992, Physical review. B, Condensed matter.

[63]  Haosen Fan,et al.  Ion-exchange strategy of CoS2/Sb2S3 hetero-structured nanocrystals encapsulated into 3D interpenetrating dual-carbon framework for high-performance Na+/K+ batteries , 2021 .

[64]  Daobin Mu,et al.  A review: Modification strategies of nickel-rich layer structure cathode (Ni ≥ 0.8) materials for lithium ion power batteries , 2021 .

[65]  D. Mitchell,et al.  Dispersion of Ni2+ions: Via acetate precursor in the preparation of NaNiPO4 nanoparticles: Effect of acetate vs. nitrate on the capacitive energy storage properties , 2018 .

[66]  Universities of Leeds, Sheffield and York , 2022 .