Analysis and design considerations of a 2-DoF rotary-linear actuator

In this paper, a permanent magnet actuator with two degrees of freedom is analyzed. The actuator can provide rotation and translation independently controlled. Additionally, passive gravity overcompensation is included in the actuator, i.e., during power down conditions, the translator will be at rest in its upper position. The different aspects of this actuator are described and a prototype is designed for a pick and place application. The actuator is designed for a maximum acceleration level in the axial direction of 150 ms-2 for a stroke of 45 mm and a peak force of 40 N. For rotation, the requirements are a torque level of 20 mNm and an angular position accuracy of 0.12 mrad.

[1]  L. Encica,et al.  Passive and active constant force-displacement characteristics and optimization of a long-stroke linear actuator , 2008, 2008 11th International Conference on Optimization of Electrical and Electronic Equipment.

[2]  D. Howe,et al.  Cogging-force-reduction techniques for linear permanent-magnet machines , 2005 .

[3]  F J F Tacken,et al.  Design and Optimization of a Rotary Actuator for a Two-Degree-of-Freedom $z\phi$-Module , 2009, IEEE Transactions on Industry Applications.

[4]  Y. Sato.  Development of a 2-Degree-of-Freedom Rotational/Linear Switched Reluctance Motor , 2007, IEEE Transactions on Magnetics.

[5]  Guillaume Krebs,et al.  Design of a permanent magnet actuator for linear and rotary movements , 2008 .

[6]  T. Onuki,et al.  Induction Motor With Helical Motion By Phase Control , 1997, 1997 IEEE International Magnetics Conference (INTERMAG'97).

[7]  Elena A. Lomonova,et al.  Design and optimization of a rotary actuator for a two degree-of-freedom zφ-module , 2009 .

[8]  J. J. Cathey,et al.  Verification of a field theory analysis applied to a helical motion induction motor , 1988 .

[9]  D. Howe,et al.  Fringing in tubular permanent-magnet Machines: part II. Cogging force and its minimization , 2003 .

[10]  J. van Dijk,et al.  Mechatronic design of a z-Φ induction actuator , 1997 .

[11]  Koen J Meessen,et al.  Modeling and Experimental Verification of a Tubular Actuator for 20-g Acceleration in a Pick-and-Place Application , 2010, IEEE Transactions on Industry Applications.

[12]  Johannes J. H. Paulides,et al.  General Formulation of the Electromagnetic Field Distribution in Machines and Devices Using Fourier Analysis , 2010, IEEE Transactions on Magnetics.

[13]  D. Howe,et al.  Reduction of cogging force in slotless linear permanent magnet motors , 1997 .

[14]  P. Bolognesi,et al.  Structure and theoretical analysis of a novel rotary-linear isotropic brushless machine , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.