Vibration response analysis of a gear-rotor-bearing system considering steady-state temperature

[1]  Changjiang Zhou,et al.  Nonlinear tribo-dynamic model and experimental verification of a spur gear drive under loss-of-lubrication condition , 2021 .

[2]  Siyu Chen,et al.  Research on dynamic characteristics of gear system considering the influence of temperature on material performance , 2021, Journal of Vibration and Control.

[3]  Changjiang Zhou,et al.  A novel thermal network model for predicting the contact temperature of spur gears , 2020 .

[4]  Wei Li,et al.  Investigation of the thermal stiffness and thermal tooth profile modification of spur gears , 2020 .

[5]  Hanjun Jiang,et al.  Nonlinear dynamics of a spur gear pair with force-dependent mesh stiffness , 2020 .

[6]  Weitao Chen,et al.  A novel dynamic model for the spiral bevel gear drive with elastic ring squeeze film dampers , 2019, Nonlinear Dynamics.

[7]  Robert G. Parker,et al.  Influence of simultaneous time-varying bearing and tooth mesh stiffness fluctuations on spur gear pair vibration , 2019, Nonlinear Dynamics.

[8]  Xiaopeng Li,et al.  Nonlinear response analysis of gear-shaft-bearing system considering tooth contact temperature and random excitations , 2019, Applied Mathematical Modelling.

[9]  Wei Li,et al.  Experimental study on thermal dynamic characteristics of gear transmission system , 2019, Measurement.

[10]  Liu Shaojun,et al.  A temperature measurement method for testing lubrication system or revealing scuffing failure mechanism of spur gear , 2018, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology.

[11]  Jinyuan Tang,et al.  Analysis of coupled lateral-torsional vibration response of a geared shaft rotor system with and without gyroscopic effect , 2018 .

[12]  Changjun Qi,et al.  Nonlinear dynamic model of a gear-rotor-bearing system considering the flash temperature , 2017 .

[13]  Jianfei Shi,et al.  Nonlinear Dynamic Modeling of 3-DOF Gear System with Tooth Contact Temperature , 2017 .

[14]  Diogo M. P. Rocha.  Bulk Temperature in Polymer-Metal Hybrid Gears , 2017 .

[15]  Jinyuan Tang,et al.  Effects of tooth profile modification on dynamic responses of a high speed gear-rotor-bearing system , 2016 .

[16]  Tianning Chen,et al.  Non-linear dynamics of gear pair with dynamic backlash subjected to combined internal and external periodic excitations , 2016 .

[17]  Jinyuan Tang,et al.  Frequency spectrum and vibration analysis of high speed gear-rotor system with tooth root crack considering transmission error excitation , 2016 .

[18]  Jinyuan Tang,et al.  Rotordynamics analysis of a double-helical gear transmission system , 2016 .

[19]  Bangchun Wen,et al.  Effects of tooth crack on vibration responses of a profile shifted gear rotor system , 2015 .

[20]  Ahmet Kahraman,et al.  Influence of indexing errors on dynamic response of spur gear pairs , 2015 .

[21]  Jinyuan Tang,et al.  Rotordynamics analysis of a double-helical gear transmission system , 2015, Meccanica.

[22]  Hui Ma,et al.  Fault features analysis of cracked gear considering the effects of the extended tooth contact , 2015 .

[23]  Robert F. Handschuh,et al.  Test Facility Simulation Results for Aerospace Loss-of-Lubrication of Spur Gears , 2014 .

[24]  Hui Ma,et al.  Effects of tip relief on vibration responses of a geared rotor system , 2014 .

[25]  Hong Hee Yoo,et al.  Dynamic analysis for a pair of spur gears with translational motion due to bearing deformation , 2010 .

[26]  Guy Sutter,et al.  Flash temperature measurement during dry friction process at high sliding speed , 2010 .

[27]  A. Lehtovaara,et al.  Evaluation of lubrication conditions in gear contacts using contact resistance and bulk temperature measurements , 2010 .

[28]  Teik C. Lim,et al.  Influence of Gyroscopic Effect on Hypoid and Bevel Geared System Dynamics , 2009 .

[29]  Bernd-Robert Höhn,et al.  Influence of immersion depth of dip lubricated gears on power loss, bulk temperature and scuffing load carrying capacity , 2008 .

[30]  Hui Long,et al.  Operating temperatures of oil-lubricated medium-speed gears: Numerical models and experimental results , 2003 .

[31]  Rajendra Singh,et al.  ANALYSIS OF PERIODICALLY VARYING GEAR MESH SYSTEMS WITH COULOMB FRICTION USING FLOQUET THEORY , 2001 .

[32]  Wen-Jun Zhang,et al.  Stochastic Vibration Model of Gear Transmission Systems Considering Speed-Dependent Random Errors , 1998 .

[33]  P. Velex,et al.  A MATHEMATICAL MODEL FOR ANALYZING THE INFLUENCE OF SHAPE DEVIATIONS AND MOUNTING ERRORS ON GEAR DYNAMIC BEHAVIOUR , 1996 .

[34]  Rajendra Singh,et al.  Non-linear dynamics of a geared rotor-bearing system with multiple clearances , 1991 .

[35]  Rajendra Singh,et al.  Non-linear dynamics of a spur gear pair , 1990 .

[36]  H. Blok,et al.  The flash temperature concept , 1963 .