Analysis of ventilation effects and the thermal behaviour of multifunctional façade elements with 3D CFD models

Abstract This study determines thermal behaviour and airflow characteristics inside multifunctional facade elements. The facade elements investigated were designed in course of the research project “Multifunctional Plug & Play Facade” [1] . The integration of energy converting systems in a facade construction causes higher temperatures on the backside of the collectors impacting subjacent layers and the interior. Due to periphery openings, heat can partly be transferred to the exterior by the effects of natural ventilation. With the help of ‘steady state’ 3D Computational Fluid Dynamics (CFD) models of three different facade elements were investigated and compared. In particular this study presents a detailed analysis of airflow and the thermal behaviour of a photovoltaic module (PV), a solar thermal collector (ST) as well as a transparent single layer glass panel used as impact pane (TR) all integrated into the facade construction. Despite high temperatures in the solar thermal collector the lowest air temperatures inside the cavity were detected for the ST facade. The ventilation effects of the side openings were clearly identified in all facades. The numerical model includes the effects of heat transfer, buoyancy, radiation and the impact of solar radiation. Data from on-site measurement did largely match with the simulations’ outcome.

[1]  Abderrahmane Baïri,et al.  Transient free convection in passive buildings using 2D air-filled parallelogram-shaped enclosures with discrete isothermal heat sources , 2011 .

[2]  H. Manz.  Total solar energy transmittance of glass double façades with free convection , 2004 .

[3]  Monika Woloszyn,et al.  Three-dimensional simulation with a CFD tool of the airflow phenomena in single floor double-skin facade equipped with a venetian blind , 2005 .

[4]  Yanfeng Liu,et al.  A numerical and experimental analysis of the air vent management and heat storage characteristics of a trombe wall , 2013 .

[5]  Eduardo Blanco,et al.  Development and experimental validation of a simulation model for open joint ventilated façades , 2011 .

[6]  H. Manz,et al.  Numerical simulation of heat transfer by natural convection in cavities of facade elements , 2003 .

[7]  Daniel R. Rousse,et al.  A comprehensive review of solar facades. Opaque solar facades , 2012 .

[8]  Wei Sun,et al.  Performance of PV-Trombe wall in winter correlated with south façade design , 2011 .

[9]  Hongxing Yang,et al.  Numerical evaluation of the mixed convective heat transfer in a double-pane window integrated with see-through a-Si PV cells with low-e coatings , 2010 .

[10]  Hongxing Yang,et al.  Performance of ventilated double-sided PV façade compared with conventional clear glass façade , 2013 .

[11]  John L. Wright,et al.  Flow visualization of natural convection in a tall, air-filled vertical cavity , 2006 .

[12]  Paul Strachan,et al.  Case studies of outdoor testing and analysis of building components , 2008 .

[13]  Zhiqiang Zhai,et al.  Numerical investigation on thermal performance and correlations of double skin façade with buoyancy-driven airflow , 2008 .

[14]  Herricos Stapountzis,et al.  Flow and heat transfer inside a PV/T collector for building application , 2012 .

[15]  Christophe Menezo,et al.  Modelling of natural convection in vertical and tilted photovoltaic applications , 2012 .

[16]  Orhan Aydin,et al.  Determination of optimum air-layer thickness in double-pane windows , 2000 .

[17]  Daniel R. Rousse,et al.  A comprehensive review of solar facades. Transparent and translucent solar facades , 2012 .

[18]  Eduard Egusquiza,et al.  CFD assessment of the performance of lateral ventilation in Double Glazed Façades in Mediterranean climates , 2011 .

[19]  Basak Kundakci Koyunbaba,et al.  The comparison of Trombe wall systems with single glass, double glass and PV panels , 2012 .

[20]  L. T. Wong,et al.  A multivariate-logistic model for acceptance of indoor environmental quality (IEQ) in offices , 2008 .

[21]  R. Viskanta,et al.  Experimental studies of combined heat transfer in turbulent mixed convection fluid flows in double-skin-façades , 2002 .

[22]  Lone Hedegaard Mortensen,et al.  Investigation of airflow patterns in a microclimate by particle image velocimetry (PIV) , 2008 .

[23]  Orhan Aydin,et al.  Conjugate heat transfer analysis of double pane windows , 2006 .

[24]  Giorgio Baldinelli,et al.  Double skin facades for warm climate regions : Analysis of a solution with an integrated movable shading system , 2009 .

[25]  J. Xamán,et al.  Numerical study of heat transfer by laminar and turbulent natural convection in tall cavities of façade elements , 2005 .

[26]  E. Blanco,et al.  Energy performance of an open-joint ventilated façade compared with a conventional sealed cavity façade , 2011 .

[27]  Eduard Egusquiza,et al.  Performance and influence of numerical sub-models on the CFD simulation of free and forced convection in double-glazed ventilated façades , 2008 .

[28]  Juan M. Belman-Flores,et al.  Analysis of the Conjugate Heat Transfer in a Multi-Layer Wall including an Air Layer , 2010 .

[29]  Guohui Gan,et al.  Numerical determination of adequate air gaps for building-integrated photovoltaics , 2009 .

[30]  Guillaume Houzeaux,et al.  Numerical analysis of the most appropriate heat transfer correlations for free ventilated double skin photovoltaic façades , 2013 .

[31]  Michele De Carli,et al.  Evaluation of various CFD modelling strategies in predicting airflow and temperature in a naturally ventilated double skin façade , 2011 .