A series-stacked architecture for high-efficiency data center power delivery

As the number and power density of servers within today's data centers continues to increase, efficient power delivery is becoming a major industry concern. This paper proposes a series-connected power distribution architecture for data center server clusters, which decouples conversion losses from the total power delivered - allowing for conversion losses to remain relatively fixed, even as server power requirements increase. Voltage regulation of the servers within the cluster is achieved by the use of differential power processing hardware. This work also provides an experimental comparison between the fully-operational series-connected cluster implementation and the best-in-class commercial power distribution hardware - showing more than a five times reduction in conversion losses. The measured system-level efficiency for a best-in-class conventional power delivery architecture was 97.5%, and the measured system efficiency of the proposed architecture was 99.5%.

[1]  R. C. N. Pilawa-Podgurski,et al.  Sub-module differential power processing for photovoltaic applications , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[2]  Christine Morin,et al.  Kerrighed: A Single System Image Cluster Operating System for High Performance Computing , 2003, Euro-Par.

[3]  Philip T. Krein,et al.  System energy minimization via joint optimization of the DC-DC converter and the core , 2011, IEEE/ACM International Symposium on Low Power Electronics and Design.

[4]  Christos Kozyrakis,et al.  Full-System Power Analysis and Modeling for Server Environments , 2006 .

[5]  Dag Bjork.  Maintenance of batteries; New trends in batteries and automatic battery charging , 1986, INTELEC '86 - International Telecommunications Energy Conference.

[6]  Philip T. Krein,et al.  Differential Power Processing for DC Systems , 2013, IEEE Transactions on Power Electronics.

[7]  N. Rasmussen.  AC vs. DC Power Distribution for Data Centers - Revision 5 , 2008 .

[8]  C. Schaef,et al.  A multi-level ladder converter supporting vertically-stacked digital voltage domains , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[9]  S. Rajapandian,et al.  High-tension power delivery: operating 0.18 /spl mu/m CMOS digital logic at 5.4V , 2005, ISSCC. 2005 IEEE International Digest of Technical Papers. Solid-State Circuits Conference, 2005..

[10]  Pradeep Samuel Shenoy,et al.  Improving performance, efficiency, and reliability of DC-DC conversion systems by differential power processing , 2012 .

[11]  R.V. White.  Electrical isolation requirements in power-over-Ethernet (PoE) power sourcing equipment (PSE) , 2006, Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06..

[12]  Ali Heydari,et al.  High-efficiency server design , 2011, 2011 International Conference for High Performance Computing, Networking, Storage and Analysis (SC).

[13]  Jie Gu,et al.  Multi-story power delivery for supply noise reduction and low voltage operation , 2005, ISLPED '05. Proceedings of the 2005 International Symposium on Low Power Electronics and Design, 2005..

[14]  H. Schmidt,et al.  The charge equalizer-a new system to extend battery lifetime in photovoltaic systems, UPS and electric vehicles , 1993, Proceedings of Intelec 93: 15th International Telecommunications Energy Conference.

[15]  Gu-Yeon Wei,et al.  Evaluation of voltage stacking for near-threshold multicore computing , 2012, ISLPED '12.

[16]  R. Pilawa-Podgurski,et al.  Re-thinking data center power delivery: Regulating series-connected voltage domains in software , 2013, 2013 IEEE Power and Energy Conference at Illinois (PECI).

[17]  P. T. Krein,et al.  Overcoming the power wall: Connecting voltage domains in series , 2011, 2011 International Conference on Energy Aware Computing.

[18]  Radu Marculescu,et al.  Voltage-Frequency Island Partitioning for GALS-based Networks-on-Chip , 2007, 2007 44th ACM/IEEE Design Automation Conference.

[19]  P. T. Krein,et al.  Differential Power Processing for Increased Energy Production and Reliability of Photovoltaic Systems , 2013, IEEE Transactions on Power Electronics.