Life cycle and economic assessment of source-separated MSW collection with regard to greenhouse gas emissions: a case study in China

In China, the continuously increasing amount of municipal solid waste (MSW) has resulted in an urgent need for changing the current municipal solid waste management (MSWM) system based on mixed collection. A pilot program focusing on source-separated MSW collection was thus launched (2010) in Hangzhou, China, to lessen the related environmental loads. And greenhouse gas (GHG) emissions (Kyoto Protocol) are singled out in particular. This paper uses life cycle assessment modeling to evaluate the potential environmental improvement with regard to GHG emissions. The pre-existing MSWM system is assessed as baseline, while the source separation scenario is compared internally. Results show that 23 % GHG emissions can be decreased by source-separated collection compared with the base scenario. In addition, the use of composting and anaerobic digestion (AD) is suggested for further optimizing the management of food waste. 260.79, 82.21, and −86.21 thousand tonnes of GHG emissions are emitted from food waste landfill, composting, and AD, respectively, proving the emission reduction potential brought by advanced food waste treatment technologies. Realizing the fact, a modified MSWM system is proposed by taking AD as food waste substitution option, with additional 44 % GHG emissions saved than current source separation scenario. Moreover, a preliminary economic assessment is implemented. It is demonstrated that both source separation scenarios have a good cost reduction potential than mixed collection, with the proposed new system the most cost-effective one.

[1]  Shichao Li,et al.  Recycling Behavior Under Chinas Social and Economic TransitionThe Case of Metropolitan Wuhan , 2003 .

[2]  Hans-Jürgen Dr. Klüppel,et al.  The Revision of ISO Standards 14040-3 - ISO 14040: Environmental management – Life cycle assessment – Principles and framework - ISO 14044: Environmental management – Life cycle assessment – Requirements and guidelines , 2005 .

[3]  Sven Lundie,et al.  LIFE CYCLE ASSESSMENT OF FOOD WASTE MANAGEMENT OPTIONS , 2005 .

[4]  J. Hopper,et al.  Waste minimization by process modification , 1991 .

[5]  Hsien Hui Khoo,et al.  Food waste conversion options in Singapore: environmental impacts based on an LCA perspective. , 2010, The Science of the total environment.

[6]  Michael R. Overcash Environmental assessment of products, volume 1‐methodology, tools, and case studies in product development. Henrik Wenzel, Michael Hauschild, and Leo Alting, Kluwer Academic Publishers, London, United Kingdom, (1997), 543 pages, [ISBN No. 0‐412‐80800‐5], U.S. List Price $150.00 , 1999 .

[7]  Di Feng,et al.  Municipal solid waste source-separated collection in China: A comparative analysis. , 2011, Waste management.

[8]  T. H. Christensen,et al.  Recycling of metals: accounting of greenhouse gases and global warming contributions , 2009, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[9]  Shabbir H Gheewala,et al.  LCA: a decision support tool for environmental assessment of MSW management systems. , 2008, Journal of environmental management.

[10]  Stefano Consonni,et al.  Material and energy recovery in integrated waste management systems: project overview and main results. , 2011, Waste management.

[11]  Leonor Patricia Güereca,et al.  Life cycle assessment of two biowaste management systems for Barcelona, Spain , 2006 .

[12]  G. Finnveden,et al.  Recycling revisited - life cycle comparisons of global warming impact and total energy use of waste management strategies , 2005 .

[13]  T. H. Christensen,et al.  Recycling of glass: accounting of greenhouse gases and global warming contributions. , 2009, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[14]  Thomas Højlund Christensen,et al.  Life cycle assessment of waste paper management: The importance of technology data and system boundaries in assessing recycling and incineration , 2008 .

[15]  Amelia L. Craighill,et al.  Lifecycle assessment and economic evaluation of recycling: A case study , 1996 .

[16]  Shabbir H. Gheewala,et al.  The holistic impact of integrated solid waste management on greenhouse gas emissions in Phuket , 2008 .

[17]  Thomas H. Christensen,et al.  Life-cycle assessment of the municipal solid waste management system in Hangzhou, China (EASEWASTE) , 2009, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[18]  T. H. Christensen,et al.  Composting and compost utilization: accounting of greenhouse gases and global warming contributions , 2009, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[19]  T. H. Christensen,et al.  Collection, transfer and transport of waste: accounting of greenhouse gases and global warming contribution , 2009, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[20]  Silvia Bargigli,et al.  Life cycle assessment (LCA) of waste management strategies: Landfilling, sorting plant and incineration , 2009 .

[21]  Paolo S Calabrò,et al.  Greenhouse gases emission from municipal waste management: The role of separate collection. , 2009, Waste management.

[22]  J R Barton,et al.  Carbon--making the right choice for waste management in developing countries. , 2008, Waste management.

[23]  Shabbir H. Gheewala,et al.  Application of Life Cycle Assessment to Cleaner Production , 2007 .

[24]  Stefano Consonni,et al.  Material and energy recovery in integrated waste management systems: the potential for energy recovery. , 2011, Waste management.

[25]  T. H. Christensen,et al.  Recycling of paper: accounting of greenhouse gases and global warming contributions , 2009, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[26]  Stefanie Hellweg,et al.  Modeling Waste Incineration for Life-Cycle Inventory Analysis in Switzerland , 2001 .

[27]  Henrik Wenzel,et al.  Environmental assessment of products volume 1: Methodology, tools, and case studies in product , 1997 .

[28]  Gjalt Huppes,et al.  Life cycle assessment of municipal solid waste management with regard to greenhouse gas emissions: case study of Tianjin, China. , 2009, The Science of the total environment.

[29]  T. Astrup,et al.  Recycling of plastic: accounting of greenhouse gases and global warming contributions , 2009, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[30]  Göran Finnveden,et al.  Life cycle assessment of energy from solid waste—part 1: general methodology and results , 2005 .

[31]  T. H. Christensen,et al.  Anaerobic digestion and digestate use: accounting of greenhouse gases and global warming contribution , 2009, Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA.

[32]  Mufide Banar,et al.  Life cycle assessment of solid waste management options for Eskisehir, Turkey. , 2009, Waste management.

[33]  Jinglan Hong,et al.  Life cycle assessment of four municipal solid waste management scenarios in China. , 2010, Waste management.

[34]  Tieyong Zuo,et al.  Life cycle inventory for electricity generation in China , 2007 .

[35]  Rodrigo Diaz,et al.  Modelling greenhouse gas emissions for municipal solid waste management strategies in Ottawa, Ontario, Canada , 2008 .