Miniaturised Flexible Temperature Sensor

We propose a microfabrication technology for a flexible temperature sensor with a 100times100 mum sensing area and a probe length of 7 cm. We use a biocompatible new high temperature-resistant polyimide (U-Varnish-S, Ube, Diisseldorf, Germany) to embed a thin film platinum resistor as sensing element. The sensor is operational from 0degC up to 400degC with an accuracy of plusmn1degC at high temperatures and has a time constant of 0.05 seconds. This sensor was designed for temperature characterisation of hot steam injected for thermo-ablation of tumours via a micro-needle.

[1]  A new method of thermoablation with hot water vapour for localized tumours. , 2004, Anticancer research.

[2]  Danick Briand,et al.  Micro-hotplates on polyimide for sensors and actuators , 2006 .

[3]  K. Djupsund,et al.  Flexible polyimide microelectrode array for in vivo recordings and current source density analysis. , 2007, Biosensors & bioelectronics.

[4]  S. J. Kim,et al.  Biocompatibility of polyimide microelectrode array for retinal stimulation , 2004 .

[5]  P. Renaud,et al.  Flexible polyimide probes with microelectrodes and embedded microfluidic channels for simultaneous drug delivery and multi-channel monitoring of bioelectric activity. , 2004, Biosensors & bioelectronics.

[6]  E. Hiltbrand,et al.  Experimental study on a large animal model of a new thermoablation technique. , 2006, Anticancer research.

[7]  T. Stieglitz,et al.  High density interconnects and flexible hybrid assemblies for active biomedical implants , 2001 .

[8]  K.P. Koch,et al.  Implantable biomedical microsystems for neural prostheses , 2005, IEEE Engineering in Medicine and Biology Magazine.

[9]  M. Saidani,et al.  Cubic millimeter power inductor fabricated in batch-type wafer technology , 2003 .

[10]  P. Renaud,et al.  Polyimide-based microfluidic devices. , 2001, Lab on a Chip.

[11]  M. Shikida,et al.  Thermal characterization of micro heater arrays on a polyimide film substrate for fingerprint sensing applications , 2005 .

[12]  W. Reichert,et al.  Polyimides as biomaterials: preliminary biocompatibility testing. , 1993, Biomaterials.

[13]  A. Kingon,et al.  Flexible thin film temperature and strain sensor array utilizing a novel sensing concept , 2007 .

[14]  P. Renaud,et al.  Partial release and detachment of microfabricated metal and polymer structures by anodic metal dissolution , 2005, Journal of Microelectromechanical Systems.

[15]  Shadi A. Dayeh,et al.  Micromachined infrared bolometers on flexible polyimide substrates , 2005 .