Abstract A multisensor was applied to discriminate between grape juice and fermented Albillo white wine variety. The multisensor consists of 15 sensing elements formed by tin oxide thin layers deposited by r.f. reactive sputtering. Some components were doped with platinum and chromium, aiming to improve their sensitivity and selectivity to the wine varieties tested. Each sensor was characterised by resistance measurements from 200 to 350°C, in order to find the optimum detection temperature. The detection of the volatile compounds present in wine was useful to distinguish between the different wine phases. The response to the fermented wine was always better than the corresponding one to the grape juice. All the sensors had a high sensitivity and the best responses were obtained in doped sensors at 350°C. At this temperature, the different wine phases (grape juice, fermented wine and wine) were detected. The presence of volatile organic compounds in the different phases of wine elaboration is also discussed.
[1]
Giorgio Sberveglieri,et al.
An electronic nose for the recognition of the vineyard of a red wine
,
1996
.
[2]
M. Sriyudthsak,et al.
Thin tin-oxide film alcohol-gas sensor
,
1995
.
[3]
P. T. Moseley,et al.
Tin dioxide gas sensors. Part 2.—The role of surface additives
,
1988
.
[4]
F. Solymosi,et al.
Adsorption and reduction of NO on tin(IV) oxide doped with chromium(III) oxide
,
1978
.
[5]
I. Sayago,et al.
Analysis of VOCs with a tin oxide sensor array
,
1997
.
[6]
I. Sayago,et al.
Measurements of VOCs in soils through a tin oxide multisensor system
,
1997
.