Numerical Studies on Dynamic Behaviour of Tubular T-joint Subjected to Impact Loading

Joints play an important role in resisting impact loading in Tubular structures. In this paper, a finite element model validated by experimental results is developed to numerically study the failure modes and energy dissipation mechanism of tubular T-joint impacted by a drop hammer with the initial velocity of 7–10 m/s. The resistant mechanism is investigated based on the dynamic responses of the joints under impact loading. Strain, displacement and the failure modes of the T-joints are also predicted. Global and local deformations of the tubular joints are distinguished using an equal area axis method, which helps to discover the failure mechanism of the joints. Using the yield line theory, an equivalent impact force estimation method is also proposed based on the impact load versus displacement relationship. The numerical analysis and the simplified method provide a basis for impact resistance evaluation and progressive collapse mitigation of steel tubular structures in design practice in the future.

[1]  J. E. Harding,et al.  Axially pre-loaded steel tubes subjected to lateral impacts : An experimental study , 2002 .

[2]  Carlos Guedes Soares,et al.  Plastic Analysis of Laterally Loaded Circular Tubes , 1983 .

[3]  J. E. Harding,et al.  Contribution of ring resistance in the behaviour of steel tubes subjected to a lateral impact , 2000 .

[4]  Mohammad Reza Khedmati,et al.  A numerical investigation into strength and deformation characteristics of preloaded tubular members under lateral impact loads , 2012 .

[5]  J. E. Harding,et al.  Interface Forces in Laterally Impacted Steel Tubes , 2008 .

[6]  Qu Hui.  Impact performance studies of T-tubular joint impacted on the chord , 2011 .

[7]  Norman Jones,et al.  Dynamic energy absorption and perforation of ductile structures , 2010 .

[8]  Jian Song,et al.  Evaluation of damage to offshore platform structures due to collision of large barge , 2005 .

[9]  Lin-Hai Han,et al.  Behavior of concrete filled steel tubular (CFST) members under lateral impact: Experiment and FEA model , 2013 .

[10]  J. E. Harding,et al.  Axially pre-loaded steel tubes subjected to lateral impacts (a numerical simulation) , 2008 .

[11]  J. E. Harding,et al.  Effect of impact damage on the capacity of tubular steel members of offshore structures , 1998 .

[12]  Daxu Zhang,et al.  Experimental study on mechanical behavior of an impacted steel tubular T-joint in fire , 2011 .

[13]  Wang Zili,et al.  Study on Collision Behavior of K-joint in Offshore Jacket Platform , 2007 .

[14]  W. Q. Shen,et al.  Further experimental study on the failure of fully clamped steel pipes , 1998 .

[15]  J. E. Harding,et al.  Dynamic behaviour of axially pre-loaded tubular steel members of offshore structures subjected to impact damage , 1999 .

[16]  W. Abramowicz,et al.  Dynamic axial crushing of square tubes , 1984 .

[17]  Norman Jones,et al.  Low-velocity impact of pressurised pipelines , 2010 .

[18]  L. Javier Malvar,et al.  Review of Strain Rate Effects for Concrete in Tension , 1998 .

[19]  Charles P. Ellinas.  Ultimate Strength of Damaged Tubular Bracing Members , 1984 .

[20]  Raphael H. Grzebieta,et al.  Hollow and concrete filled steel hollow sections under transverse impact loads , 2008 .

[21]  Norman Jones.  An Approximate Rigid-Plastic Analysis of Shell Intersections Loaded Dynamically , 1973 .

[22]  Shao Yong-bo,et al.  Mechanism Analysis of Impact Performance For Tubular T-Joint , 2010 .