The information capacity of a communication system employing a wavelength-division multiplexing scheme can be increased by reducing the free spectral range between different signals, reducing the full width at half maximum (FWHM), and detecting these closely spaced channels. After critically analyzing the design parameters of existing resonant-cavity-enhanced (RCE) p–i–n photodetectors, we have determined that more closely spaced channels can be detected either by increasing the length of a RCE p–i–n detector or by reducing the stop-band width of the bottom mirror. A masking procedure is described to determine the maximum cavity length attainable for any bottom distributed Bragg reflector (DBR) materials so that photodetector filters and detects only one wavelength, being insensitive to all other wavelengths. The optimized cavity length of single wavelength selective RCE detector operating at 1.3μm using 42 12 pairs of InAlGaAs∕InP as a bottom DBR is 7.5μm and its theoretical FWHM is 2.5nm.
[1]
J. Muszalski,et al.
Resonant cavity enhanced photonic devices
,
1995
.
[2]
J. A. Jervase,et al.
Characteristic analysis of resonant-cavity-enhanced (RCE) photodetectors
,
1998
.
[3]
S. Kasap.
Optoelectronics and Photonics: Principles and Practices
,
2001
.
[4]
M. Tilsch,et al.
Long resonator micromachined tunable GaAs-AlAs Fabry-Perot filter
,
1997,
IEEE Photonics Technology Letters.
[5]
The design of resonant-cavity-enhanced photodetectors for a high bandwidth-efficiency product
,
2001
.
[6]
H. Bourdoucen,et al.
Design of resonant-cavity-enhanced photodetectors using genetic algorithms
,
2000,
IEEE Journal of Quantum Electronics.
[7]
C. Phillips,et al.
Analytical method for the optical modelling of resonant-cavity-enhanced photodiodes
,
2004
.