While the design and technology of conventional low rise light framed residential structures are relatively simple, their response to lateral loading is quite complex. This is due to the high degree of redundancy, the irregular geometry and interaction between the structural and non-structural components. In addition, the designated lateral bracing elements within one structure may exhibit significantly different behaviour due to the different bracing actions and different materials. This paper focuses on the bracing capacity of plasterboard clad walls which could be considered either structural or non-structural. While such walls may be installed purely as partition walls, they may provide lateral strength and stiffness due to the complex load paths. The paper presents in detail the possible load transfer mechanisms to a variety of typical walls. It also highlights the difficulty with performing racking tests on isolated walls due to the complex boundary conditions surrounding walls in real structures. In addition, the paper reports racking test results that demonstrate the effects of different boundary conditions on the load carrying capacity and the failure modes.
[1]
Lam Pham,et al.
Contribution of non-structural components to the dynamic performance of domestic steel framed structures
,
1995
.
[2]
Guk-Rwang Won.
American Society for Testing and Materials
,
1987
.
[3]
Adrian M. Chandler,et al.
Modal Analysis of Steel-Framed Residential Structures for Application to Seismic Design
,
2001
.
[4]
P. C. Smith,et al.
Timber sheathed walls for wind and earthquake resistance
,
1986
.
[5]
Thomas S. Tarpy,et al.
Shear resistance of steel-stud wall panels
,
1982
.
[6]
Emad Gad,et al.
Lateral performance of cold-formed steel-framed domestic structures
,
1999
.
[7]
William J. McCutcheon.
Racking Deformations in Wood Shear Walls
,
1985
.
[8]
Adrian M. Chandler,et al.
Lateral Behavior of Plasterboard-Clad Residential Steel Frames
,
1999
.