Research on Dynamic Test of Hyper-Velocity Impact Penetration Acceleration Signal

In recent years, with the development of hyper-velocity weapon, the research focus of penetration effect has switched gradually from high-velocity to hyper-velocity, with insufficient studies on penetration effect and its internal mechanism. Besides, the study on penetration effect of hyper-velocity weapon depends on the measurement of mechanical signal during penetration of projectile. In this paper, dynamic test of hyper-velocity impact penetration acceleration signal is studied in depth. Firstly, the penetration velocity and acceleration of projectile under the impact load are analyzed, the influence of the movement of the testing unit on the measured acceleration signal is studied, and the factors to be considered when measuring the hyper-velocity impact load are given. Further, this paper designs a measurement circuit and dynamic models of each measurement module, details the influence of dynamic characteristics of power delivery network on test accuracy, and provides a method to obtain dynamic characteristics of power delivery network by virtue of S parameter. Finally, to extract the real penetration overload signal, a superior noise reduction algorithm adopting Modified Ensemble Empirical Mode Decomposition (MEEMD) is proposed, taking dynamic uncertainty and degree of approximation as evaluation indicators, and the measured sensor data is analyzed and processed with the proposed superior noise reduction algorithm. The experiment results show that, this method has a better noise reduction effect, and can be adopted to effectively extract real penetration overload signal. The results have theoretical research and application value to evaluate the reasonableness and effectiveness of measurement method of hyper-velocity penetration overload signal, and seek for a superior processing method for the noisy penetration overload signal.

[1]  Garrett Birkhoff,et al.  Explosives with Lined Cavities , 1948 .

[2]  Tommaso Addabbo,et al.  A Smart Measurement System With Improved Low-Frequency Response to Detect Moving Charged Debris , 2016, IEEE Transactions on Instrumentation and Measurement.

[3]  N. Huang,et al.  The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis , 1998, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[4]  J. W. Rogers,et al.  Penetration of a rod into a semi-infinite target , 1961 .

[5]  Eric Bogatin,et al.  Signal and Power Integrity - Simplified , 2009 .

[6]  Dennis L. Orphal,et al.  Explosions and impacts , 2006 .

[7]  Jin Dong-liang.  Experimental investigation on projectiles’ high-velocity penetration into concrete targets , 2010 .

[8]  C.-C. Wang,et al.  Power and signal integrity co-design for quad flat non-lead package , 2012 .

[9]  Mingyang Wang,et al.  Constraining damage size and crater depth: A physical model of transient crater formation in rocky targets , 2015 .

[10]  B. Pompe,et al.  Permutation entropy: a natural complexity measure for time series. , 2002, Physical review letters.

[11]  Long Wang,et al.  Reverse Dispersion Entropy: A New Complexity Measure for Sensor Signal , 2019, Sensors.

[12]  N. S. Brar,et al.  PENETRATION OF GROUT AND CONCRETE TARGETS WITH OGIVE-NOSE STEEL PROJECTILES , 1996 .

[13]  Rakesh Malik,et al.  Signal Integrity and Power Integrity Issues at System Level , 2012 .

[14]  Ilya N. Lomov,et al.  Simulation of hypervelocity penetration in limestone , 2006 .

[15]  An explicit solution of the Alekseevski-Tate penetration equations , 2006 .

[16]  Wei Zhang,et al.  An investigation on mass loss of ogival projectiles penetrating concrete targets , 2011 .

[17]  Long Wang,et al.  A novel noise reduction technique for underwater acoustic signals based on complete ensemble empirical mode decomposition with adaptive noise, minimum mean square variance criterion and least mean square adaptive filter , 2020 .

[18]  Norden E. Huang,et al.  Ensemble Empirical Mode Decomposition: a Noise-Assisted Data Analysis Method , 2009, Adv. Data Sci. Adapt. Anal..

[19]  Choul-Young Kim,et al.  Improvement of Noise Characteristics by Analyzing Power Integrity and Signal Integrity Design for Satellite On-board Electronics , 2020 .

[20]  Q. Fang,et al.  Projectile penetration into mortar targets with a broad range of striking velocities: Test and analyses , 2017 .

[21]  S. S. Shen,et al.  Applications of Hilbert–Huang transform to non‐stationary financial time series analysis , 2003 .

[22]  Li Qin,et al.  Optimal Design and Analysis on High Overload Buffer Structure of Passive Semi-Strapdown Inertial Navigation System , 2020, Sensors.

[23]  Yu Wang,et al.  Signal Measurement of Projectile Penetration Overload Based on Charge Sensor , 2019, IEEE Access.