Energy requirement for fine grinding of torrefied wood

Abstract The purpose of this study is to investigate the influence of torrefaction on wood grinding energy. Wood chips were torrefied at different temperatures and durations. The energy required to obtain fine powder was measured. Particle size analyses were carried out on each powder sample. It is showed that torrefaction decreases both grinding energy and particle size distribution. A criterion to compare grindability of natural and torrefied wood is proposed. It takes into account both grinding energy and particle size distribution. It accounts the energy required for grinding particles to sizes inferior to 200 μm, for given grinding conditions. Torrefaction is characterised by the anhydrous weight loss (AWL) of wood. For AWL inferior to around 8%, grinding energy decreases fast. Over 8%, grinding energy decreases at a slow rate. Particle size distribution decreases linearly as the AWL increases. Both for spruce and beech, the grinding criterion is decreased of 93% when the AWL is around 28%.

[1]  A. Demirbas,et al.  Biomass resource facilities and biomass conversion processing for fuels and chemicals , 2001 .

[2]  Melvin P. Tucker,et al.  Comminution of biomass: hammer and knife mills , 1986 .

[3]  D. Hon,et al.  Wood and Cellulosic Chemistry , 1990 .

[4]  Shigekatsu Mori,et al.  A new pulverized biomass utilization technology , 2008 .

[5]  Hans Schulz,et al.  Short history and present trends of Fischer–Tropsch synthesis , 1999 .

[6]  D. Fengel,et al.  Wood: Chemistry, Ultrastructure, Reactions , 1983 .

[7]  J. Abecassis,et al.  Analysis of the milling reduction of bread wheat farina: Physical and biochemical characterisation , 2007 .

[8]  F. L. Browne.  Theories of the combustion of wood and its control , 1958 .

[9]  A. Demirbas,et al.  Combustion characteristics of different biomass fuels , 2004 .

[10]  R. Guyonnet,et al.  Evaluation of heat treated beech by non destructive testing , 2003 .

[11]  P.C.A. Bergman,et al.  Torrefaction for biomass co-firing in existing coal-fired power stations BIOCOAL , 2005 .

[12]  G. Simmons,et al.  Particle size limitations due to heat transfer in determining pyrolysis kinetics of biomass , 1986 .

[13]  C. Brischke,et al.  Interrelationship between the severity of heat treatments and sieve fractions after impact ball milling: a mechanical test for quality control of thermally modified wood , 2006 .

[14]  R. Guyonnet,et al.  Evaluation of heat-treated wood swelling by differential scanning calorimetry in relation to chemical composition , 2005 .

[15]  Vincent Repellin.  Optimisation des paramètres durée et température d'un traitement thermique du bois. Modifications des propriétés d'usage du bois en relation avec les modifications physico-chimiques et ultrastructurales occasionnées par le traitement thermique. , 2006 .

[16]  Kj Krzysztof Ptasinski,et al.  Exergetic optimisation of a production process of Fischer-Tropsch fuels from biomass , 2005 .

[17]  P. Bekhta,et al.  Effect of High Temperature on the Change in Color, Dimensional Stability and Mechanical Properties of Spruce Wood , 2003 .

[18]  R. Guyonnet,et al.  Analyse de la pyrolyse menagee du bois par un couplage TG-DSC-IRTF , 1998 .

[19]  J. Kiel,et al.  Torrefaction for biomass upgrading , 2005 .

[20]  J. Bourgois,et al.  Characterization and analysis of torrefied wood , 1988, Wood Science and Technology.

[21]  Jan Erik Mattsson,et al.  Particle and handling characteristics of wood fuel powder: effects of different mills , 2002 .

[22]  G. N. Richards,et al.  First chemical events in pyrolysis of wood , 1988 .

[23]  Ayhan Demirbas,et al.  Progress and recent trends in biofuels , 2007 .

[24]  R. Guyonnet,et al.  Thermal treatment of wood: analysis of the obtained product , 1989, Wood Science and Technology.

[25]  S. Bernotat,et al.  Comminution of non-brittle materials , 2004 .

[26]  E. Sjöström,et al.  Wood Chemistry: Fundamentals and Applications , 1981 .

[27]  Joel Abecassis,et al.  Description of a micromill with instrumentation for measuring grinding characteristics of wheat grain. , 2000 .

[28]  R. Guyonnet,et al.  Modelling anhydrous weight loss of wood chips during torrefaction in a pilot kiln. , 2010 .

[29]  A. Demirbas,et al.  Importance of biodiesel as transportation fuel , 2007 .

[30]  L. S. Esteban,et al.  Evaluation of different strategies for pulverization of forest biomasses , 2006 .

[31]  A E Humphrey,et al.  Energy requirements for the size reduction of poplar and aspen wood , 1989, Biotechnology and bioengineering.

[32]  Li-gang Wei,et al.  Characteristics of fast pyrolysis of biomass in a free fall reactor , 2006 .

[33]  D. Geldart.  Types of gas fluidization , 1973 .

[34]  L. Puigjaner,et al.  Predicting the minimum fluidization velocity of polydisperse mixtures of scrap-wood particles , 2000 .