Comparison of proton exchange membrane fuel cell static models

Using experimental study results, this paper aims at evaluating the different analytical models that are used for modeling Proton Exchange Membrane Fuel Cell Stack (PEMFC). Three static models such as those of Amphlett, Larminie–Dicks and Chamberlin–Kim are demonstrated. These models are studied and validated experimentally with identification of their parameters separately. Hence, experimental results are compared for fuel cell test bench for two rated powers (400 W and 700 W). Furthermore, simulation results explicitly verify the accuracy and efficiency of these static models.

[1]  Daniel Hissel,et al.  Three order state space modeling of proton exchange membrane fuel cell with energy function definition , 2010 .

[2]  Boonyang Plangklang,et al.  Model and experiment analysis of 1.2 kW PEMFC electrification , 2011 .

[3]  Pierre R. Roberge,et al.  Development and application of a generalised steady-state electrochemical model for a PEM fuel cell , 2000 .

[4]  Koan-Yuh Chang,et al.  The optimal performance estimation for an unknown PEMFC based on the Taguchi method and a generic numerical PEMFC model , 2009 .

[5]  G. H. Riahy,et al.  Optimal design of a reliable hydrogen-based stand-alone wind/PV generating system, considering component outages , 2009 .

[6]  P. R. Pathapati,et al.  A new dynamic model for predicting transient phenomena in a PEM fuel cell system , 2005 .

[7]  James Larminie,et al.  Fuel Cell Systems Explained , 2000 .

[8]  M. J. Khan,et al.  Dynamic modeling and simulation of a small wind–fuel cell hybrid energy system , 2005 .

[9]  Pierre R. Roberge,et al.  Parametric modelling of the performance of a 5-kW proton-exchange membrane fuel cell stack , 1994 .

[10]  Daniel Hissel,et al.  On-board fuel cell power supply modeling on the basis of neural network methodology , 2003 .

[11]  J. C. Amphlett,et al.  TECHNICAL PAPERS ELECTROCHEMICAL SCIENCE AND TECHNOLOGY Performance Modeling of the Ballard Mark IV Solid Polymer Electrolyte Fuel Cell I. Mechanistic Model Development , 1995 .

[12]  Daniel Hissel,et al.  Electrical equivalent model of a proton exchange membrane fuel cell with experimental validation , 2011 .

[13]  Shaker Haji,et al.  Analytical modeling of PEM fuel cell i–V curve , 2011 .

[14]  Linda Barelli,et al.  Dynamic analysis of PEMFC-based CHP systems for domestic application , 2012 .

[15]  Marcos V. Moreira,et al.  A practical model for evaluating the performance of proton exchange membrane fuel cells , 2009 .

[16]  C. Chamberlin,et al.  Modeling of Proton Exchange Membrane Fuel Cell Performance with an Empirical Equation , 1995 .

[17]  Romeo Ortega,et al.  Experimental Validation of a PEM Fuel-Cell Reduced-Order Model and a Moto-Compressor Higher Order Sliding-Mode Control , 2010, IEEE Transactions on Industrial Electronics.

[18]  Paolo Spinelli,et al.  Semi-empirical evaluation of PEMFC electro-catalytic activity , 2008 .

[19]  Mehmet Uzunoglu,et al.  Modeling, control and simulation of a PV/FC/UC based hybrid power generation system for stand-alone applications , 2009 .

[20]  I. Sadli.  Modélisation par impédance d'une pile à combustible PEM pour utilisation en électronique de puissance , 2006 .

[21]  Kamaruzzaman Sopian,et al.  Performance of a PV-wind hybrid system for hydrogen production , 2009 .

[22]  J. C. Amphlett,et al.  Performance modeling of the Ballard Mark IV solid polymer electrolyte fuel cell. II: Empirical model development , 1995 .

[23]  Daniel Hissel,et al.  MPPT of a PEMFC based on air supply control of the motocompressor group , 2010 .

[24]  Didier Mayer,et al.  A new approach to empirical electrical modelling of a fuel cell, an electrolyser or a regenerative fuel cell , 2004 .

[25]  J. C. Amphlett.  Performance Modeling of the Ballard Mark IV Solid Polymer Electrolyte Fuel Cell , 1995 .

[26]  Maher A.R. Sadiq Al-Baghdadi,et al.  Modelling of proton exchange membrane fuel cell performance based on semi-empirical equations , 2005 .