Modeling Carbon-Black/Polymer Composite Sensors.

Conductive polymer composite sensors have shown great potential in identifying gaseous analytes. To more thoroughly understand the physical and chemical mechanisms of this type of sensor, a mathematical model was developed by combining two sub-models: a conductivity model and a thermodynamic model, which gives a relationship between the vapor concentration of analyte(s) and the change of the sensor signals. In this work, 64 chemiresistors representing eight different carbon concentrations (8-60 vol% carbon) were constructed by depositing thin films of a carbon-black/polyisobutylene composite onto concentric spiral platinum electrodes on a silicon chip. The responses of the sensors were measured in dry air and at various vapor pressures of toluene and trichloroethylene. Three parameters in the conductivity model were determined by fitting the experimental data. It was shown that by applying this model, the sensor responses can be adequately predicted for given vapor pressures; furthermore the analyte vapor concentrations can be estimated based on the sensor responses. This model will guide the improvement of the design and fabrication of conductive polymer composite sensors for detecting and identifying mixtures of organic vapors.

[1]  C. Ho,et al.  Resistivity measurements of carbon–polymer composites in chemical sensors: impact of carbon concentration and geometry , 2004 .

[2]  D. McLachlan,et al.  The measurement and comparative analysis of the electrical and thermal conductivities, permeability and Young's modulus of sintered nickel , 1988 .

[3]  A. Márquez,et al.  Conductivity variation induced by solvent swelling of an elastomer–carbon black–graphite composite , 1997 .

[4]  C. A. Smolders,et al.  Calculation of liquid-liquid phase separation in a ternary system of a polymer in a mixture of a solvent and a nonsolvent , 1982 .

[5]  Nathan S. Lewis,et al.  Array-based vapor sensing using chemically sensitive, carbon black-Polymer resistors , 1996 .

[6]  Bertil Sundqvist,et al.  Resistivity of a composite conducting polymer as a function of temperature, pressure, and environment: Applications as a pressure and gas concentration transducer , 1986 .

[7]  I. R. Martín-Domínguez,et al.  Numerical method to evaluate the influence of organic solvent absorption on the conductivity of polymeric composites , 2002 .

[8]  J. Lai,et al.  Construction of ternary phase diagrams in nonsolvent/solvent/PMMA systems , 1998 .

[9]  M. S. High,et al.  Handbook of polymer solution thermodynamics , 1993 .

[10]  M. K. Alam,et al.  Characterization of the ability of polymeric chemiresistor arrays to quantitate trichloroethylene using partial least squares (PLS): effects of experimental design, humidity, and temperature , 2003 .

[11]  R. C. Hughes,et al.  In-Situ Chemiresistor Sensor Package for Real-Time Detection of Volatile Organic Compounds in Soil and Groundwater , 2002 .

[12]  K. S. Rawlinson,et al.  Development of a Surface Acoustic Wave Sensor for In-Situ Monitoring of Volatile Organic Compounds , 2003 .

[13]  Gregory A. Bakken,et al.  Computational methods for the analysis of chemical sensor array data from volatile analytes. , 2000, Chemical reviews.

[14]  Shannon E. Stitzel,et al.  Cross-reactive chemical sensor arrays. , 2000, Chemical reviews.

[15]  H. Lei.  Modeling and Data Analysis of Conductive Polymer Composite Sensors , 2006 .

[16]  R. Newnham,et al.  Electrical Resistivity of Composites , 1990 .

[17]  D. McLachlan,et al.  An equation for the conductivity of binary mixtures with anisotropic grain structures , 1987 .

[18]  M. Yorizane,et al.  Measurement of solubility of organic solvents in polyisobutylene using the piezoelectric-quartz sorption method , 1984 .

[19]  Clifford K. Ho,et al.  Chemiresistor Microsensors for In-Situ Monitoring of Volatile Organic Compounds: Final LDRD Report , 2003 .

[20]  Jack W. Judy,et al.  Micromachined polymer-based chemical gas sensor array , 2001 .

[21]  J. Grate,et al.  Solubility interactions and the design of chemically selective sorbent coatings for chemical sensors and arrays , 1991 .

[22]  F. Lux,et al.  Models proposed to explain the electrical conductivity of mixtures made of conductive and insulating materials , 1993 .

[23]  H. Tompa.  Polymer solutions , 1956 .

[24]  Claude M. Penchina,et al.  The physics of amorphous solids , 1983 .

[25]  S. Prager,et al.  Equilibrium Sorption Data for Polyisobutylene—Hydrocarbon Systems , 1953 .

[26]  Levent Yilmaz,et al.  Analysis of nonsolvent‐solvent‐polymer phase diagrams and their relevance to membrane formation modeling , 1986 .

[27]  N Tsubokawa,et al.  A novel contamination sensor in solution: the response of the electric resistance of a composite based on crystalline polymer-grafted carbon black , 2001 .

[28]  S. Nunes,et al.  On the cooccurrence of demixing and thermoreversible gelation of polymer solutions. 2. Thermodynamic background , 1987 .

[29]  N. Lewis,et al.  A chemically diverse conducting polymer-based "electronic nose". , 1995, Proceedings of the National Academy of Sciences of the United States of America.