Failure Analysis of Ceramic Substrates Used in High Power IGBT Modules

High voltage power modules are used in numerous applications to build high power converters. Technically, these modules are made of different materials and among them, dielectric materials are organic and inorganic. Organic insulators (gels) are used to avoid corona discharges in the vicinity of connecting wires and high voltage dies (diodes and transistors) and to protect them from moisture and contaminants. Inorganic insulators (ceramic substrates) are used to insulate the high voltage which dies from the grounded elements and to transfer heat to the heat sink. Despite being used since the late 90s, there is a lack of fundamental knowledge about the electrical properties of these substrates. Consequently, manufacturers tend to assure the reliability by over sizing them. As there are no clear rules for how to do that, failures occur, leading to the converter shutdown. The aim of this study is to bring new information about the understanding of the dielectric strength of ceramic materials used in these modules. We have focused our work on the correlation between the mechanical and the dielectric properties of ceramics by using relevant experiments. We provide new information about the impact of existing cracks on the ceramic dielectric failure, according to the electromechanical breakdown model. Our conclusions bring crucial information about the precautions to be taken during manufacturing and implementation of these substrates in power modules to reduce the likelihood of the particular causes of failure.

[1]  S. Lefebvre,et al.  Thermal analysis of high power IGBT modules , 2000, 12th International Symposium on Power Semiconductor Devices & ICs. Proceedings (Cat. No.00CH37094).

[2]  J. Fothergill.  Filamentary electromechanical breakdown , 1991 .

[3]  Gerhard Mitic,et al.  Reliability testing of high-power multi-chip IGBT modules , 2000 .

[4]  Gerhard Wachutka,et al.  Crack mechanism in wire bonding joints , 1998 .

[5]  H. Zeller,et al.  Electrofracture mechanics of dielectric aging , 1984 .

[6]  H. Bowen,et al.  Electrical Breakdown Strength of Alumina at High Temperatures , 1981 .

[7]  T. Lebey,et al.  Ceramic Substrates for High-temperature Electronic Integration , 2009 .

[8]  E. Herr,et al.  Substrate-to-base solder joint reliability in high power IGBT modules , 1997 .

[9]  D. Juvé,et al.  Relationships between dielectric breakdown resistance and charge transport in alumina materials- : Effects of the microstructure , 2007 .

[10]  Impact of a surface laser treatment on the dielectric strength of α-alumina , 2009 .

[11]  Vincent Bley,et al.  Contribution to the dimensioning of the different insulating materials used in high voltage power electronics module manufacturing , 2003, The Fifth International Conference on Power Electronics and Drive Systems, 2003. PEDS 2003..

[12]  Relations between electrical breakdown field and mechanical properties of ceramics , 1995, Proceedings of 1995 Conference on Electrical Insulation and Dielectric Phenomena.

[13]  Stéphane Lefebvre,et al.  Effects of metallization thickness of ceramic substrates on the reliability of power assemblies under high temperature cycling , 2006, Microelectron. Reliab..

[14]  A. Benmansour,et al.  Failure mechanism of trench IGBT under short-circuit after turn-off , 2006, Microelectron. Reliab..

[15]  Thierry Lebey,et al.  Investigations on DC conductivity and space charge in silicone gel , 2002, Annual Report Conference on Electrical Insulation and Dielectric Phenomena.

[16]  D. Malec,et al.  Aging of ceramic materials used in power electronic substrates , 2000, 2000 Annual Report Conference on Electrical Insulation and Dielectric Phenomena (Cat. No.00CH37132).

[17]  V. Bley,et al.  Contribution to the understanding of the relationship between mechanical and dielectric strengths of Alumina , 2010 .

[18]  Mauro Ciappa,et al.  Selected failure mechanisms of modern power modules , 2002, Microelectron. Reliab..

[19]  M. Locatelli,et al.  Dielectrics for High Temperature SiC Device Insulation: Review of New Polymeric and Ceramic Materials , 2011 .

[20]  Guy Lefranc,et al.  High temperature reliability on automotive power modules verified by power cycling tests up to 150degreeC , 2003, Microelectron. Reliab..

[21]  S. Hartmann,et al.  Analysis of insulation failure modes in high power IGBT modules , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..