Influence of varying material properties on the load-bearing capacity of glued laminated timber

[1]  Dr. John Maddern Harris,et al.  Spiral Grain and Wave Phenomena in Wood Formation , 1988, Springer Series in Wood Science.

[2]  I. James,et al.  Linear regression with censored data , 1979 .

[3]  W. Cǒté,et al.  Principles of Wood Science and Technology: I Solid Wood , 1977 .

[4]  F. Lam,et al.  Variation of tensile strength along the length of lumber , 2004, Wood Science and Technology.

[5]  Frank Lam,et al.  The effect of edge knots on the strength of SPF MSR lumber , 1998 .

[6]  Gerhard Fink,et al.  Model for the prediction of the tensile strength and tensile stiffness of knot clusters within structural timber , 2014, European Journal of Wood and Wood Products.

[7]  N. Cox.  Statistical Models in Engineering , 1970 .

[8]  F. Kollmann,et al.  Dynamische Messung der elastischen Holzeigenschaften und der Dämpfung Ein Beitrag zur zerstörungsfreien Werkstoffprüfung , 1960, Holz als Roh- und Werkstoff.

[9]  Peter Niemz,et al.  Physik des Holzes , 2005 .

[10]  Jochen Köhler,et al.  Zerstörungsfreie Versuche zur Ermittlung des Elastizitätsmodules von Holzbrettern , 2012 .

[11]  Donald A. Bender,et al.  Stochastic Model for Localized Tensile Strength and Modulus of Elasticity in Lumber , 1991 .

[12]  M. Samson,et al.  Effect of knots on the flatwise bending stiffness of lumber members , 1992, Holz als Roh- und Werkstoff.

[13]  Alfred J. Stamm,et al.  Principles of Wood Science and Technology , 2013, Springer Berlin Heidelberg.

[14]  B. Heimeshoff,et al.  Zugfestigkeit und Biege-E-Modul von Fichten-Brettlamellen , 1980, Holz als Roh- und Werkstoff.

[15]  B. Madsen,et al.  Structural behavior of timber. , 1992 .

[16]  Jochen Köhler,et al.  Multiscale variability of stiffness properties of timber boards , 2016 .

[17]  G. G. Garrett,et al.  The Effect of Knots on the Fracture Strength of Wood - II. A Comparative Study of Methods of Assessment, and Comments on the Application of Fracture Mechanics to Structural Timber , 1979 .

[18]  Christina Foley,et al.  Modeling the effects of knots in Structural Timber , 2003 .

[19]  W. Weibull.  A statistical theory of the strength of materials , 1939 .

[20]  M. Frese,et al.  Bending strength of spruce glulam , 2009, European Journal of Wood and Wood Products.

[21]  A. Shigo.  A New Tree Biology: Facts, Photos, and Philosophies on Trees and Their Problems and Proper Care , 1989 .

[22]  Jochen Köhler,et al.  Proposal for a probabilistic model code for design of timber structures , 2004 .

[23]  C. Foley,et al.  A three-dimensional paradigm of fiber orientation in timber , 2001, Wood Science and Technology.

[24]  Samprit Chatterjee,et al.  Fitting linear regression models to censored data by least squares and maximum likelihood methods , 1986 .

[25]  Michael Havbro Faber,et al.  Probabilistic modeling of timber structures , 2005 .

[26]  François Colling,et al.  Einfluß keilgezinkter Lamellen auf die Biegefestigkeit von Brettschichtholzträgern , 1985, Holz als Roh- und Werkstoff.

[27]  Ola Dahlblom,et al.  Influence of varying growth characteristics on stiffness grading of structural timber , 1998 .

[28]  K. Bathe.  Finite Element Procedures , 1995 .

[29]  R. Görlacher,et al.  Ein neues Meßverfahren zur Bestimmung des Elastizitätsmoduls von Holz , 1984, Holz als Roh- und Werkstoff.

[30]  R. Hernandez,et al.  Probabilistic Modeling of Glued-Laminated Timber Beams , 2007 .

[31]  Palle Thoft-Christensen,et al.  Structural Reliability Theory and Its Applications , 1982 .

[32]  G. G. Garrett,et al.  The Effect of Knots on the Fracture Strength of Wood - I. A Review of Methods of Assessment , 1979 .

[33]  Trevor Hastie,et al.  The Elements of Statistical Learning , 2001 .

[34]  F. E. Woeste,et al.  Stochastic Model for Modulus of Elasticity of Lumber , 1986 .

[35]  F. Colling,et al.  Die Ästigkeit des in den Leimbaubetrieben verwendeten Schmittholzes , 2007, Holz als Roh- und Werkstoff.

[36]  Andrea Frangi,et al.  Modelling the bending strength of glued laminated timber - considering the natural growth characteristics of timber , 2013 .

[37]  Ricardo O. Foschi,et al.  Glued-Laminated Beam Strength: A Model , 1980 .

[38]  Jari Puttonen,et al.  Method for predicting tension capacity of sawn timber considering slope of grain around knots , 2007, Journal of Wood Science.

[39]  F. Colling.  Einfluß des Volumens und der Spannungsverteilung auf die Festigkeit eines Rechteckträgers , 1986, Holz als Roh- und Werkstoff.

[40]  Robert H. Falk,et al.  Laminating Effects in Glued-Laminated Timber Beams , 1995 .

[41]  M. Frese.  Die Biegefestigkeit von Brettschichtholz aus Buche. Experimentelle und numerische Untersuchungen zum Laminierungseffekt , 2006 .

[42]  Andrea Frangi,et al.  EXPERIMENTAL ANALYSIS OF THE DEFORMATION AND FAILURE BEHAVIOUR OF SIGNIFICANT KNOT CLUSTERS , 2012 .

[43]  R. Brandner,et al.  Glued laminated timber in bending: new aspects concerning modelling , 2008, Wood Science and Technology.

[44]  John Sunley,et al.  Timber in Construction , 1985 .

[45]  Michael Havbro Faber,et al.  Statistics and Probability Theory , 2012 .

[46]  René Steiger,et al.  Biege-, Zug- und Druckversuche an Schweizer Fichtenholz , 1995 .

[47]  Andrew H. Buchanan,et al.  Size effects in timber explained by a modified weakest link theory , 1986 .

[48]  Julia K. Denzler.  Modellierung des Größeneffektes bei biegebeanspruchtem Fichtenschnittholz , 2007 .

[49]  Erik Serrano,et al.  Numerical investigations of the laminating effect in laminated beams , 1999 .

[50]  Jochen Köhler,et al.  Reliability of timber structures , 2007 .

[51]  C. C. Gerhards.  Effect of slope of grain on tensile strength , 1988 .

[52]  Rainer Goerlacher,et al.  Sortierung von Brettschichtholzlamellen nach DIN 4074 durch Messung von Longitudinalschwingungen , 1990 .

[53]  Hid N. Grouni,et al.  Methods of structural safety , 1986 .

[54]  Robert E. Melchers,et al.  Structural Reliability: Analysis and Prediction , 1987 .

[55]  Frank Lam,et al.  Size Effects in Visually Graded Softwood Structural Lumber , 1995 .

[56]  D. Pope,et al.  The effect of global slope of grain on the bending strength of scaffold boards , 2005, Holz als Roh- und Werkstoff.

[57]  D. A. Bender,et al.  Reliability Formulation for the Strength and Fire Endurance of Glued-Laminated Beams , 1999 .

[58]  Matthias Frese,et al.  Verifikation von Festigkeitsmodellen für die Brettschichtholz-Biegefestigkeit , 2010, European Journal of Wood and Wood Products.

[59]  Andrea Frangi,et al.  Bending tests on glued laminated timber beams with well-known material properties , 2013 .

[60]  Michael Havbro Faber,et al.  Reliability-Based Code Calibration: The JCSS Approach , 2003 .

[61]  Tord Isaksson,et al.  Modelling the Variability of Bending Strength in Structural Timber - Length and Load Configuration Effects , 1999 .