Review of advanced low-emission technologies for sustainable aviation

Turbofan engines are the most widely used propulsion technology in commercial transport aircraft and are directly involved in many of the environmental impacts of aviation. Advancements in turbofan technology have thus a very significant potential in reducing aviation impacts on the environment. This article reviews the main technological advances currently being pursued in low-emission aircraft propulsion including: combustion and thermofluidic enhancements, gearbox technology, lightweight materials and intelligent engine health management systems. The paper discusses some key opportunities and challenges for these new technologies, with a particular outlook on the historical emission trends. Particularly, historical records from the ICAO aircraft engine emissions databank are used to extrapolate current trends and the progress against the ambitious targets set by international bodies. The analysis highlights that the sustained investments made by the aviation industry have yielded progressively diminishing returns and that the emission objectives will not be achieved at the current pace. Disruptive technological advances will therefore be required to significantly improve the fuel efficiency and mitigate environmental impact of commercial transport aircraft in the future.

[1]  A. Lefebvre.  Gas Turbine Combustion , 1983 .

[2]  Jianbo Yu,et al.  Aircraft engine health prognostics based on logistic regression with penalization regularization and state-space-based degradation framework , 2017 .

[3]  Howard P. Hodson,et al.  The Effect of Blade Tip Geometry on the Tip Leakage Flow in Axial Turbine Cascades , 1991 .

[4]  Joseph Zelina,et al.  Progress in Aeroengine Technology (1939--2003) , 2004 .

[5]  Colmenares Quintero,et al.  Techno-economic and environmental risk assessment of innovative propulsion systems for short-range civil aircraft , 2009 .

[6]  J. Yang,et al.  Mechanical behavior of carbon fiber composite lattice core sandwich panels fabricated by laser cutting , 2012 .

[7]  David L. Greene,et al.  Aircraft Emissions: Current Inventories and Future Scenarios , 1999 .

[8]  Jonathan Hart,et al.  A Rolls‐Royce Perspective on Concepts and Technologies for Future Green Propulsion Systems , 2015 .

[9]  A. Wulff,et al.  Technology review of aeroengine pollutant emissions , 1997 .

[10]  S. C. Yu,et al.  Numerical Investigation of the Air Tabs Technique in Jet Flow , 2013 .

[11]  A. Gangoli Rao,et al.  Performance assessment of a Multi-fuel Hybrid Engine for Future Aircraft , 2016 .

[12]  T. Hikmet Karakoc,et al.  Application of thermodynamic laws on a military helicopter engine , 2017 .

[13]  T. Hikmet Karakoc,et al.  Assessment of degradation effects for an aircraft engine considering exergy analysis , 2017 .

[14]  Alessandro Gardi,et al.  Multi-objective optimisation of aircraft flight trajectories in the ATM and avionics context , 2016 .

[15]  C. Tan,et al.  Internal Flow: Concepts and Applications , 2004 .

[16]  Jinglei Xu,et al.  Numerical Investigation of Performance of the Air Tab in the Turbofan Nozzle , 2014 .

[17]  Vikas Kumar,et al.  Toward Understanding and Optimizing Separation Control Using Microjets , 2009 .

[18]  Edward M. Greitzer,et al.  COMPRESSION SYSTEM STABILITY AND ACTIVE CONTROL , 2003 .

[19]  James F. Driscoll,et al.  Unsteady Aspects of Lean Premixed Prevaporized Gas Turbine Combustors: Flame-Flame Interactions , 2011 .

[20]  Clarence T. Chang,et al.  NASA Project Develops Next-Generation Low-Emissions Combustor Technologies , 2013 .

[21]  Hyun Dae Kim,et al.  Distributed Propulsion Vehicles , 2010 .

[22]  B. L. Koff.  Aircraft Gas Turbine Emissions Challenge , 1994 .

[23]  Hukam Chand Mongia.  N+3 and N+4 Generation Aeropropulsion Engine Combustors: Part 2 — Medium Size Rich-Dome Engines and Lean-Domes , 2013 .

[24]  Cengiz Camci,et al.  Aerodynamics of Tip Leakage Flows Near Partial Squealer Rims in an Axial Flow Turbine Stage , 2005 .

[25]  Christopher M. Heath.  Characterization of Swirl-Venturi Lean Direct Injection Designs for Aviation Gas-Turbine Combustion , 2014 .

[26]  Wuli Chu,et al.  Mechanism study of performance enhancement in a subsonic axial flow compressor with recirculating casing treatment , 2018 .

[27]  Gurkan Soykan,et al.  Future aircraft concept in terms of energy efficiency and environmental factors , 2017 .

[28]  Kateryna Synylo,et al.  Improvements on aircraft engine emission and emission inventory asesessment inside the airport area , 2017 .

[29]  David G. MacManus,et al.  Civil turbofan engine exhaust aerodynamics: impact of bypass nozzle after-body design , 2018 .

[30]  Anu Vedantham,et al.  Aviation and the Global Atmosphere: A Special Report of IPCC Working Groups I and III , 1999 .

[31]  Nadir Yilmaz,et al.  Sustainable alternative fuels in aviation. , 2017 .

[32]  Morteza Montazeri-Gh,et al.  Active Fault Tolerant Control with self-enrichment capability for gas turbine engines , 2016 .

[33]  Olcay Kincay,et al.  An environment-friendly engine selection methodology for aerial vehicles , 2018 .

[34]  David S. Lee,et al.  Transport impacts on atmosphere and climate: Aviation , 2009, Atmospheric Environment.

[35]  Gunilla Efraimsson,et al.  Potential improvement of aerodynamic performance by morphing the nacelle inlet , 2016 .

[36]  D. W. Bahr.  Technology for the design of high temperature rise combustors , 1985 .

[37]  Feng Lu,et al.  In-flight adaptive modeling using polynomial LPV approach for turbofan engine dynamic behavior , 2017 .

[38]  Yasin Şöhret,et al.  Exergetic and exergoeconomic assessment of a small-scale turbojet fuelled with biodiesel , 2017 .

[39]  J. Bons,et al.  Control of Low-Pressure Turbine Separation Using Vortex-Generator Jets , 2002 .

[40]  Xu Dong,et al.  Influence of SPS casing treatment on axial flow compressor subjected to radial pressure distortion , 2017 .

[41]  Akshay Basavaraj.  Estimation of Wave Drag of Non-TransonicAirfoils Using Korn Equation , 2015 .

[42]  Volker Gümmer,et al.  Tip Gap Variation on a Transonic Rotor in the Presence of Tip Blowing , 2014 .

[43]  Alessandro Gardi,et al.  Hybrid-electric propulsion integration in unmanned aircraft , 2017 .

[44]  Link C Jaw,et al.  Aircraft Engine Controls: Design, System Analysis, and Health Monitoring , 2009 .

[45]  William A. Sowa,et al.  The Pratt & Whitney TALON X Low Emissions Combustor: Revolutionary Results with Evolutionary Technology , 2007 .

[46]  N. A. Cumpsty,et al.  Flow Phenomena in Compressor Casing Treatment , 1984 .

[47]  D. L. Maiden.  Performance comparison of a lobed-daisy mixer nozzle with a convergent nozzle at subsonic speeds , 1973 .

[48]  David Peters,et al.  Turbofan Engine Bypass Ratio as a Function of Thrust and Fuel Flow , 2017 .

[49]  Kenneth L. Suder,et al.  Overview of the NASA Environmentally Responsible Aviation Project's Propulsion Technology Portfolio , 2012 .

[50]  E. Fernandez,et al.  Separation Control on a Low-Pressure Turbine Blade using Microjets , 2013 .

[51]  Ka Heng Liew,et al.  Performance Cycle Analysis of Turbofan Engine with Interstage Turbine Burner , 2006 .

[52]  Howard Hodson,et al.  The Reduction of Over Tip Leakage Loss in Unshrouded Axial Turbines Using Winglets and Squealers , 2014 .

[53]  David T. Pratt,et al.  NOx Sensitivities for Gas Turbine Engines Operated on Lean-Premixed Combustion and Conventional Diffusion Flames , 1992 .

[54]  Chao Zhou.  Aerothermal Performance of Different Tips in Transonic Turbine Cascade with End-Wall Motion , 2014 .

[55]  Sanjay Garg,et al.  Intelligent Propulsion Control and Health Management , 2012 .

[56]  Zhenggui Zhou,et al.  Aerodynamic design of an ultra-low rotating speed geared fan , 2017 .

[57]  Jing Wang,et al.  Chemical composition and radiative properties of nascent particulate matter emitted by an aircraft turbofan burning conventional and alternative fuels , 2019, Atmospheric Chemistry and Physics.

[58]  Weiwei Yu,et al.  Theory of Compressor Stability Enhancement Using Novel Casing Treatment, Part I: Methodology , 2014 .

[59]  Isil Yazar,et al.  Comparison of various regression models for predicting compressor and turbine performance parameters , 2017 .

[60]  Vishal Sethi,et al.  Review of modern low emissions combustion technologies for aero gas turbine engines , 2017 .

[61]  P. R. Dodge,et al.  Rotor-Tip Leakage: Part I—Basic Methodology , 1982 .