The future of biodegradable osteosyntheses.

In the last 3 decades, much progress has been made in the development of biodegradable osteosyntheses. Despite this progress, these materials are still only used in small numbers, and the scope of their application has been limited. The limitations of biodegradable osteosyntheses mainly are related to problems with their mechanical properties and, in particular, biocompatibility. These problems need to be solved so that biodegradable osteosyntheses can perform up to their full potential and thus, eventually, make their general clinical application routine. This paper presents a historical perspective on the development of biodegradable osteosyntheses, discusses the successful developmental achievements and the still-existing problems, and gives a perspective on their future development.

[1]  J M Brady,et al.  Degradation rates of oral resorbable implants (polylactates and polyglycolates): rate modification with changes in PLA/PGA copolymer ratios. , 1977, Journal of biomedical materials research.

[2]  D. Grijpma,et al.  Rubber toughening of poly(lactide) by blending and block copolymerization , 1994 .

[3]  D. Lanigan.  Life-threatening, delayed hemorrhage after Le Fort I osteotomy requiring surgical intervention: Report of two cases , 1997 .

[4]  M. Coscia,et al.  Foreign body reaction to polymeric debris following total hip arthroplasty. , 1987, Clinical orthopaedics and related research.

[5]  J. O. Hollinger,et al.  The effects of ethylene oxide sterilization on the in vitro cytotoxicity of a bone replacement material. , 1990, Toxicology in vitro : an international journal published in association with BIBRA.

[6]  B. Eppley,et al.  A Comparison of Resorbable and Metallic Fixation in Healing of Calvarial Bone Grafts , 1995, Plastic and reconstructive surgery.

[7]  P. Törmälä,et al.  Polylactide Pin With Transforming Growth Factor β1 in Delayed Osteotomy Fixation , 1998, Clinical orthopaedics and related research.

[8]  S. Shalaby,et al.  The effect of site of implantation and animal age on properties of polydioxanone pins. , 1994, Journal of biomaterials science. Polymer edition.

[9]  P. Törmälä,et al.  Ultra-high-strength absorbable self-reinforced polyglycolide (SR-PGA) composite rods for internal fixation of bone fractures: in vitro and in vivo study. , 1991, Journal of biomedical materials research.

[10]  D. Grijpma,et al.  The influence of morphology on the (hydrolytic degradation of as-polymerized and hot-drawn poly(L-lactide)) , 1998 .

[11]  Kyriacos A. Athanasiou,et al.  Elevated temperature degradation of a 50: 50 copolymer of PLA-PGA , 1997 .

[12]  C. M. Agrawal,et al.  The effects of ultrasound irradiation on a biodegradable 50-50% copolymer of polylactic and polyglycolic acids. , 1994, Journal of biomedical materials research.

[13]  C. V. van Blitterswijk,et al.  Examination of efferent lymph nodes after 2 years of transcortical implantation of poly(L-lactide) containing plugs: a case report. , 1993, Journal of biomedical materials research.

[14]  G. Boering,et al.  Resorbable materials of poly(L-lactide). VI. Plates and screws for internal fracture fixation. , 1987, Biomaterials.

[15]  Michel Vert,et al.  STRUCTURE – PROPERTY RELATIONSHIP IN THE CASE OF THE DEGRADATION OF MASSIVE ALIPHATIC POLY – (-HYDROXY ACIDS) IN AQUEOUS MEDIA, PART 1: DEGRADATION OF LACTIDE - GLYCOLIDE COPOLYMERS: PLA 37.5 GA 25 AND PLA 75 GA 25 , 1990 .

[16]  C L Davidson,et al.  Protection from stress in bone and its effects. Experiments with stainless steel and plastic plates in dogs. , 1976, The Journal of bone and joint surgery. British volume.

[17]  N. A. Sevastjanova,et al.  Biochemical characterization of connective tissue reaction to synthetic polymer implants. , 1987, Biomaterials.

[18]  S. Shalaby,et al.  Change in stiffness and effect of orientation in degrading polylactide films. , 1998, Biomaterials.

[19]  S. Gogolewski,et al.  The effect of thermal treatment on sterility, molecular and mechanical properties of various polylactides. I. Poly(L-lactide). , 1996, Biomaterials.

[20]  D. Williams,et al.  Molecular biointeractions of biomedical polymers with extracellular exudate and inflammatory cells and their effects on the biocompatibility, in vivo. , 1994, Biomaterials.

[21]  S. Hyon,et al.  Tumorigenicity of poly-L-lactide (PLLA) plates compared with medical-grade polyethylene. , 1994, Journal of biomedical materials research.

[22]  O. Böstman,et al.  Polymeric debris from absorbable polyglycolide screws and pins. Intraosseous migration studied in rabbits. , 1992, Acta orthopaedica Scandinavica.

[23]  Michel Vert,et al.  Structure-property relationships in the case of the degradation of massive aliphatic poly-(α-hydroxy acids) in aqueous media , 1990 .

[24]  A. Pennings,et al.  The effects of different steam-sterilization programs on material properties of poly(L-lactide). , 1991, Journal of applied biomaterials : an official journal of the Society for Biomaterials.

[25]  P. Vink,et al.  Aeration of ethylene oxide-sterilized polymers. , 1986, Biomaterials.

[26]  C. Blitterswijk,et al.  Evaluation of polylactide monomers in an in vitro biocompatibility assay , 1994 .

[27]  D. Grijpma,et al.  Poly(l-lactide) crosslinked with spiro-bis-dimethylene-carbonate , 1993 .

[28]  P. Rokkanen.  Absorbable materials in orthopaedic surgery. , 1991, Annals of medicine.

[29]  S. Gogolewski,et al.  Sterility, mechanical properties, and molecular stability of polylactide internal-fixation devices treated with low-temperature plasmas. , 1996, Journal of biomedical materials research.

[30]  Fred Leonard,et al.  Polylactic Acid for Surgical Implants , 1966 .

[31]  O. Nilsson,et al.  Stress shielding by rigid fixation studied in osteotomized rabbit tibiae. , 1989, Acta orthopaedica Scandinavica.

[32]  D. Williams,et al.  The effect of gamma irradiation on the enzymatic degradation of polyglycolic acid absorbable sutures. , 1983, Journal of biomedical materials research.

[33]  T. Chang,et al.  In-vivo degradation of poly(lactic acid) of different molecular weights. , 1985, Biomaterials, medical devices, and artificial organs.

[34]  R. Suuronen,et al.  Sagittal ramus osteotomies fixed with biodegradable screws: a preliminary report. , 1994, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[35]  P. Christel,et al.  Stereoregular bioresorbable polyesters for orthopaedic surgery , 1981 .

[36]  S. M. Li,et al.  Bioresorbability and biocompatibility of aliphatic polyesters , 1992 .

[37]  W C de Bruijn,et al.  Foreign body reactions to resorbable poly(L-lactide) bone plates and screws used for the fixation of unstable zygomatic fractures. , 1993, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[38]  O. Böstman.  Osteoarthritis of the ankle after foreign-body reaction to absorbable pins and screws , 1998 .

[39]  J. Benoit,et al.  In vitro and in vivo degradation of poly(D,L lactide/glycolide) type microspheres made by solvent evaporation method. , 1989, Biomaterials.

[40]  S. R. Taylor,et al.  Effect of surface texture on the soft tissue response to polymer implants. , 1983, Journal of biomedical materials research.

[41]  S. Gogolewvki.  Resorbable polymers for internal fixation. , 1992 .

[42]  J. Ong,et al.  Particulate retrieval of hydrolytically degraded poly(lactide-co-glycolide) polymers. , 2000, Journal of biomedical materials research.

[43]  L. de Leij,et al.  Inhibition of the tissue reaction to a biodegradable biomaterial by monoclonal antibodies to IFN-gamma. , 1998, Journal of biomedical materials research.

[44]  C. G. Pitt,et al.  The biodegradability of polyester blends. , 1990, Biomaterials.

[45]  G L Kimmel,et al.  Aliphatic polyesters II. The degradation of poly (DL-lactide), poly (epsilon-caprolactone), and their copolymers in vivo. , 1981, Biomaterials.

[46]  Harold Alexander,et al.  Biological response of intramedullary bone to poly‐L‐lactic acid , 1993 .

[47]  W. Mclaughlin,et al.  Measurement of absorbed doses near metal and dental material interfaces irradiated by x- and gamma-ray therapy beams. , 1990, Physics in medicine and biology.

[48]  J. Kohn,et al.  Physico-mechanical properties of degradable polymers used in medical applications: a comparative study. , 1991, Biomaterials.

[49]  D. Grijpma,et al.  Supertough poly(lactide)s , 1994 .

[50]  Suming Li,et al.  Crystalline oligomeric stereocomplex as an intermediate compound in racemic poly(DL-lactic acid) degradation , 1994 .

[51]  Y. Ikada,et al.  Toxicity test of biodegradable polymers by implantation in rabbit cornea. , 1992, Journal of biomedical materials research.

[52]  F W Cordewener,et al.  Poly(L-lactide) implants for repair of human orbital floor defects: clinical and magnetic resonance imaging evaluation of long-term results. , 1996, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[53]  C. Chu,et al.  The study of thermal and gross morphologic properties of polyglycolic acid upon annealing and degradation treatments. , 1988, Journal of biomedical materials research.

[54]  T Zislis,et al.  A scanning electron microscopic study of in vitro toxicity of ethylene-oxide-sterilized bone repair materials. , 1989, The Journal of oral implantology.

[55]  Y Ikada,et al.  Biodegradable screw fixation of rabbit tibia proximal osteotomies. , 1991, Journal of applied biomaterials : an official journal of the Society for Biomaterials.

[56]  P. Ring,et al.  Osteosarcoma in association with total hip replacement , 1984, The Journal of bone and joint surgery. British volume.

[57]  P. Dijkstra,et al.  Biocompatibility of poly (DL-lactic acid/glycine) copolymers. , 1991, Clinical materials.

[58]  H Bernstein,et al.  Effects of metal salts on poly(DL-lactide-co-glycolide) polymer hydrolysis. , 1997, Journal of biomedical materials research.

[59]  B. Eppley,et al.  Resorbable Plate Fixation in Pediatric Craniofacial Surgery , 1997, Plastic and reconstructive surgery.

[60]  D. Janzen,et al.  Orthosorb: a case of foreign-body reaction. , 1995, The Journal of foot and ankle surgery : official publication of the American College of Foot and Ankle Surgeons.

[61]  L. Cima,et al.  In vitro cell response to differences in poly-L-lactide crystallinity. , 1996, Journal of biomedical materials research.

[62]  C. Chu,et al.  The in-vitro degradation of poly(glycolic acid) sutures--effect of pH. , 1981, Journal of biomedical materials research.

[63]  C. A. van Blitterswijk,et al.  In vitro biocompatibility testing of polylactides Part I Proliferation of different cell types , 1992 .

[64]  F Leonard,et al.  Biodegradable poly(lactic acid) polymers. , 1971, Journal of biomedical materials research.

[65]  C. Lindqvist,et al.  Reconstruction of orbital floor with polydioxanone plate. , 1991, International journal of oral and maxillofacial surgery.

[66]  N. Gopal.  Radiation sterilization of pharmaceuticals and polymers , 1978 .

[67]  W C de Bruijn,et al.  In vivo degradation and biocompatibility study of in vitro pre-degraded as-polymerized polyactide particles. , 1995, Biomaterials.

[68]  J M Brady,et al.  Resorption rate, route, route of elimination, and ultrastructure of the implant site of polylactic acid in the abdominal wall of the rat. , 1973, Journal of biomedical materials research.

[69]  G. Ciardelli,et al.  Characterization of the cell response of cultured macrophages and fibroblasts to particles of short-chain poly[(R)-3-hydroxybutyric acid]. , 1996, Journal of biomedical materials research.

[70]  J O Hollinger,et al.  Preliminary report on the osteogenic potential of a biodegradable copolymer of polyactide (PLA) and polyglycolide (PGA). , 1983, Journal of biomedical materials research.

[71]  E. Hirvensalo.  Fracture fixation with biodegradable rods. Forty-one cases of severe ankle fractures. , 1989, Acta orthopaedica Scandinavica.

[72]  M. Vert,et al.  Something new in the field of PLA/GA bioresorbable polymers? , 1998, Journal of controlled release : official journal of the Controlled Release Society.

[73]  O. Böstman,et al.  Impact of the use of absorbable fracture fixation implants on consumption of hospital resources and economic costs. , 1991, The Journal of trauma.

[74]  B. Eppley,et al.  Resorbable bone fixation: its potential role in cranio-maxillofacial trauma. , 1996, The Journal of cranio-maxillofacial trauma.

[75]  R. Suuronen.  Biodegradable fracture-fixation devices in maxillofacial surgery , 1993 .

[76]  J. Hollinger,et al.  Restoration of bone discontinuities in dogs using a biodegradable implant. , 1987, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[77]  A. Pennings,et al.  In vitro predegradation at elevated temperatures of poly(lactide) , 1995 .

[78]  S. Northup.  Current problems associated with toxicity evaluation of medical device materials and future research needs. , 1989, Fundamental and applied toxicology : official journal of the Society of Toxicology.

[79]  O. Böstman,et al.  Foreign-body reactions to fracture fixation implants of biodegradable synthetic polymers. , 1990, The Journal of bone and joint surgery. British volume.

[80]  A. U. Daniels,et al.  Mechanical properties of biodegradable polymers and composites proposed for internal fixation of bone. , 1990, Journal of applied biomaterials : an official journal of the Society for Biomaterials.

[81]  S. Gogolewski,et al.  Enhancement of the mechanical properties of polylactides by solid-state extrusion. I. Poly(D-lactide). , 1996, Biomaterials.

[82]  O. Böstman,et al.  Ankle fractures treated using biodegradable internal fixation. , 1989, Clinical orthopaedics and related research.

[83]  W. E. Skiens.  Sterilizing radiation effects on selected polymers , 1980 .

[84]  A. Mikos,et al.  Effects of biodegradable polymer particles on rat marrow-derived stromal osteoblasts in vitro. , 1998, Biomaterials.

[85]  C. Krettek,et al.  [Distal radius fracture. Fracture stabilization with biodegradable osteosynthesis pins (Biofix). Experimental studies and initial clinical experiences]. , 1989, Der Unfallchirurg.

[86]  G. Boering,et al.  Resorbable poly(L-lactide) plates and screws for the fixation of zygomatic fractures. , 1987, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[87]  A. U. Daniels,et al.  Six bioabsorbable polymers: in vitro acute toxicity of accumulated degradation products. , 1994, Journal of applied biomaterials : an official journal of the Society for Biomaterials.

[88]  A. Mikos,et al.  Degradation of polydispersed poly(L-lactic acid) to modulate lactic acid release. , 1995, Biomaterials.

[89]  B. Eppley,et al.  Resorbable coupling fixation in craniosynostosis surgery: experimental and clinical applications. , 1995, The Journal of craniofacial surgery.

[90]  D. Pichora,et al.  An Investigation of Poly(lactic acid) Degradation , 1994 .

[91]  D. Grijpma,et al.  High-impact poly(L/D-lactide) for fracture fixation: in vitro degradation and animal pilot study. , 1995, Biomaterials.

[92]  E Wintermantel,et al.  Autosterilization of biodegradable implants by injection molding process. , 1997, Journal of biomedical materials research.

[93]  S. Goodman,et al.  The effects of bulk versus particulate polymethylmethacrylate on bone. , 1988, Clinical orthopaedics and related research.

[94]  J O Hollinger,et al.  Biodegradable bone repair materials. Synthetic polymers and ceramics. , 1986, Clinical orthopaedics and related research.

[95]  O. Böstman,et al.  Chevron Osteotomy Fixed with Absorbable Polyglycolide Pins , 1991, Foot & ankle.

[96]  Michel Vert,et al.  Structure-property relationships in the case of the degradation of massive poly(α-hydroxy acids) in aqueous media , 1990 .

[97]  C. M. Agrawal,et al.  Protein Interactions with Polylactide-Polyglycolide Particles and Scaffolds , 1997 .

[98]  L. Hagmar,et al.  Cancer incidence in Swedish sterilant workers exposed to ethylene oxide. , 1995, Occupational and environmental medicine.

[99]  J. W. Moore,et al.  Foreign body giant cell reaction related to placement of tetracycline-treated polylactic acid: report of 18 cases. , 1990, Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons.

[100]  G. Boering,et al.  Resorbable materials of poly(L-lactide). VII. In vivo and in vitro degradation. , 1987, Biomaterials.

[101]  P. Törmälä,et al.  Strength and strength retention in vitro, of absorbable, self-reinforced polyglycolide (PGA) rods for fracture fixation. , 1987, Biomaterials.

[102]  Y. Ikada,et al.  Bioabsorption of polylactides with different molecular properties. , 1989, Journal of biomedical materials research.

[103]  H Winet,et al.  Fibroblast growth factor-2 alters the effect of eroding polylactide-polyglycolide on osteogenesis in the bone chamber. , 1998, Journal of biomedical materials research.

[104]  R J Haddad,et al.  Correlation of tissue reaction to corrosion in osteosynthetic devices. , 1984, Journal of biomedical materials research.

[105]  W. J. Larson,et al.  Degradation rates of polymers and copolymers of polylactic and polyglycolic acids. , 1974, Oral surgery, oral medicine, and oral pathology.

[106]  C. M. Agrawal,et al.  Technique to control pH in vicinity of biodegrading PLA-PGA implants. , 1997, Journal of biomedical materials research.

[107]  L. Claes,et al.  In vitro biocompatibility of bioresorbable polymers: poly(L, DL-lactide) and poly(L-lactide-co-glycolide). , 1996, Biomaterials.