论文信息 - Compact microstrip bandpass filter with sharp transition bands

Compact microstrip bandpass filter with sharp transition bands

The design of a two-pole compact microstrip bandpass filter is presented. The filter consists of only one miniaturized center-stubbed half-wavelength resonator and tapped-line input/output ports, and exhibits transmission zeros at both sides of the passband. Therefore, it is very compact, and provides sharp transition bands. The measurement results of filters designed at 4.4GHz are given to validate the theory

Dongxiao Yang | H. Gan | Dongwu Lou

[1] A. Ioachim,et al. Microstrip filters using new compact resonators , 2002 .

[2] Chih-Ming Tsai,et al. New cross-coupled filter design using improved hairpin resonators , 2000 .

[3] Jen-Tsai Kuo,et al. Design of two-stage UIR and SIR bandpass filters with an elliptic function-like response , 2004, 2004 IEEE MTT-S International Microwave Symposium Digest (IEEE Cat. No.04CH37535).

[4] A. Ioachim,et al. Compact microstrip resonators for 900 MHz frequency band , 2003, IEEE Microwave and Wireless Components Letters.

[5] C. Quendo,et al. Narrow bandpass filters using dual-behavior resonators based on stepped-impedance stubs and different-length stubs , 2004, IEEE Transactions on Microwave Theory and Techniques.

[6] Jen-Tsai Kuo,et al. A microstrip elliptic function filter with compact miniaturized hairpin resonators , 2000, IEEE Microwave and Guided Wave Letters.

[7] Quan Xue,et al. A Novel Compact Microstrip Bandpass Filter Using an Open-Loop Resonator with Radial Stub , 2005 .

[8] Eric Rius,et al. Narrow bandpass filters using dual-behavior resonators , 2003 .