Experimental and modelling study of superficial elastomer vulcanization by short wave infrared radiation

During the manufacturing of car body joints, many thermal processes are usually used to obtain the end product. Among these processes, infrared technology is widely employed, notably at the extruder outlet in order to quickly vulcanize superficially the elastomer. The extruded profile is next totally vulcanized during the process continuation. This superficial treatment is a major process step because it fixes the extruded product section and prevents thus shape deformations. A perfect knowledge of the infrared impact is necessary to provide a good quality of the end product. This paper deals with the study of superficial vulcanization of an EPDM-based rubber by infrared radiation. Thermo-physical properties and reaction kinetics were estimated by experimental measurements. A numerical model was developed to predict temperature and vulcanization profiles in the material thickness. In parallel, vulcanization tests were carried out on instrumented samples. The simulated temperature profiles were compared and validated with experimental ones and a new experimental methodology was implemented to determine and to validate the vulcanization profile in the sample thickness.

[1]  M. Abadie,et al.  Effect of the crosslinking degree on curing kinetics of an epoxy–acid copolymer system , 2003 .

[2]  S. Pang,et al.  Dynamic modeling of curing process of epoxy prepreg , 2002 .

[3]  M. Arroyo,et al.  Vulcanization kinetics of natural rubber–organoclay nanocomposites , 2003 .

[4]  Theodore F. Smith,et al.  View factors for perpendicular and parallel rectangular plates , 1993 .

[5]  THREE DIMENSIONAL FINITE ELEMENT MODELLING OF TRUCK TYRE CURING PROCESS IN MOULD , 2005 .

[6]  E. Leroy,et al.  A Method of Estimating Kinetic Parameters of Thermoset Cures: Application to a Dicyanate Ester Resin , 2001 .

[7]  M. Fishenden,et al.  An Introduction To Heat Transfer , 1950 .

[8]  Patrick Glouannec,et al.  Conception of thermoelectric flux meters for infrared radiation measurements in industrial furnaces , 2007 .

[9]  Martin Kögl,et al.  The curing of powder coatings using gaseous infrared heaters: An analytical model to assess the process thermal efficiency , 2000 .

[10]  P. Salagnac,et al.  Curing of composites by radiation and natural convection in an autoclave , 2004 .

[11]  S. Chough,et al.  Kinetics of sulfur vulcanization of NR, BR, SBR, and their blends using a rheometer and DSC , 1996 .

[12]  Vanja Kosar,et al.  Modelling and simulation of the continuous power cable processing , 2007 .

[13]  A. I. Leonov,et al.  A Kinetic-Model for Sulfur Accelerated Vulcanization of a Natural-Rubber Compound , 1996 .

[14]  Yildiz Bayazitoglu,et al.  Elements of Heat Transfer , 1988 .

[15]  Tayebeh Behzad,et al.  Finite element modeling of polymer curing in natural fiber reinforced composites , 2007 .

[16]  D. Nichetti.  Determination of mechanical properties of silica compounds using a curing kinetic model , 2004 .

[17]  P. Sae-oui,et al.  Prediction of Cure Level in Thick Rubber Cylinder Using Finite Element Analysis , 2002 .

[18]  R. Chandra,et al.  Studies on dynamic and static crosslinking of ethylene vinyl acetate and ethylene propylene diene tercopolymer blends , 1999 .

[19]  C. Nah,et al.  Vulcanization kinetics of nitrile rubber/layered clay nanocomposites , 2005 .

[20]  J. Vergnaud,et al.  Calculation of profiles of temperature and state of cure developed within the rubber mass in injection molding process , 1984 .

[21]  Sung-Ju Kang,et al.  Optimal cure steps for product quality in a tire curing process , 1999 .

[22]  C. Nah,et al.  Influence of clay on the vulcanization kinetics of fluoroelastomer nanocomposites , 2004 .

[23]  Silicone rubber curing by high intensity infrared radiation , 2008 .

[24]  Pierre Laurent,et al.  Experimental and modelling study of the radiative curing of a polyester-based coating , 2006 .

[25]  A. Zaldua,et al.  Techniques used for determining cure kinetics of rubber compounds , 2007 .

[26]  Vanja Kosar,et al.  Modeling of the power cable production line , 2007 .