State-of-charge estimation and uncertainty for lithium-ion battery strings

The state-of-charge (SOC) estimation is of extreme importance for the reliability and safety of battery operation. How to estimate SOC and, to some degree, the SOC convention itself, is still a subject of great interest. Here a viable SOC convention valid for single cells and multi-cell strings is proposed and validated. Using a 3S1P string as an illustration in this work, the direct inference from a correct open circuit voltage versus SOC (OCV=f(SOC)) correspondence based on the proposed SOC convention is the best method for accurate SOC estimation among several possible approaches for strings. The thermodynamic aspect on this SOC convention is explained. Uncertainties in actual applications are also discussed. The understanding on this accurate SOC estimation approach shall facilitate reliable battery control and management.

[1]  Wei He,et al.  State of charge estimation of lithium-ion batteries using the open-circuit voltage at various ambient temperatures , 2014 .

[2]  Matthieu Dubarry,et al.  Development of a universal modeling tool for rechargeable lithium batteries , 2007 .

[3]  Matthieu Dubarry,et al.  Investigation of path dependence in commercial lithium-ion cells chosen for plug-in hybrid vehicle duty cycle protocols , 2011 .

[4]  Jianqiu Li,et al.  A review on the key issues for lithium-ion battery management in electric vehicles , 2013 .

[5]  Rui Xiong,et al.  A data-driven based adaptive state of charge estimator of lithium-ion polymer battery used in electric vehicles , 2014 .

[6]  R. Huggins,et al.  Determination of the Kinetic Parameters of Mixed‐Conducting Electrodes and Application to the System Li3Sb , 1977 .

[7]  Hongwen He,et al.  A data-driven multi-scale extended Kalman filtering based parameter and state estimation approach of lithium-ion olymer battery in electric vehicles , 2014 .

[8]  Matthieu Dubarry,et al.  From single cell model to battery pack simulation for Li-ion batteries , 2009 .

[9]  Sergiy V. Sazhin,et al.  Evaluation of Commercial Lithium-Ion Cells Based on Composite Positive Electrode for Plug-In Hybrid Electric Vehicle Applications III. Effect of Thermal Excursions without Prolonged Thermal Aging , 2013 .

[10]  R. Huggins Advanced Batteries: Materials Science Aspects , 2008 .

[11]  Andreas Jossen,et al.  Methods for state-of-charge determination and their applications , 2001 .

[12]  Matthieu Dubarry,et al.  Synthesize battery degradation modes via a diagnostic and prognostic model , 2012 .

[13]  Weijun Gu,et al.  Online cell SOC estimation of Li-ion battery packs using a dual time-scale Kalman filtering for EV applications , 2012 .

[14]  Hongwen He,et al.  Online estimation of model parameters and state-of-charge of LiFePO4 batteries in electric vehicles , 2012 .

[15]  Matthieu Dubarry,et al.  Evaluation of commercial lithium-ion cells based on composite positive electrode for plug-in hybrid electric vehicle applications. Part I: Initial characterizations , 2011 .

[16]  Jae Sik Chung,et al.  A Multiscale Framework with Extended Kalman Filter for Lithium-Ion Battery SOC and Capacity Estimation , 2010 .

[17]  Bor Yann Liaw,et al.  A novel on-board state-of-charge estimation method for aged Li-ion batteries based on model adaptive extended Kalman filter , 2014 .

[18]  Jianqiu Li,et al.  Lithium ion battery pack power fade fault identification based on Shannon entropy in electric vehicles , 2013 .

[19]  Matthieu Dubarry,et al.  Identify capacity fading mechanism in a commercial LiFePO4 cell , 2009 .

[20]  M. Dubarry,et al.  Incremental Capacity Analysis and Close-to-Equilibrium OCV Measurements to Quantify Capacity Fade in Commercial Rechargeable Lithium Batteries , 2006 .

[21]  Matthieu Dubarry,et al.  Evaluation of commercial lithium-ion cells based on composite positive electrode for plug-in hybrid electric vehicle applications. Part II. Degradation mechanism under 2 C cycle aging , 2011 .

[22]  Vojtech Svoboda,et al.  Capacity loss in rechargeable lithium cells during cycle life testing: The importance of determining state-of-charge , 2007 .

[23]  S. Jensen,et al.  Measurements of Electric Performance and Impedance of a 75 Ah NMC Lithium Battery Module , 2012 .

[24]  M. Dubarry,et al.  Identifying battery aging mechanisms in large format Li ion cells , 2011 .

[25]  Jae Wan Park,et al.  Off-grid photovoltaic vehicle charge using second life lithium batteries: An experimental and numerical investigation , 2013 .

[26]  Vojtech Svoboda,et al.  Capacity and power fading mechanism identification from a commercial cell evaluation , 2007 .

[27]  Matthieu Dubarry,et al.  Origins and accommodation of cell variations in Li‐ion battery pack modeling , 2010 .