Effect of physical adhesion on mechanical behaviour of bamboo fibre reinforced thermoplastic composites

Systematic experimental results describing the dynamic wetting properties of bamboo fibres were analysed by applying the molecular-kinetic theory of wetting. Results suggest that the bamboo fibre surface represents a well-defined system for wetting analysis. The surface free energy components were calculated according to the acid–base theory. These values were then used to calculate the theoretical work of adhesion, spreading coefficient, wetting tension, and interfacial energy. The wetting behaviour of various thermoplastic matrices (polypropylene, maleic anhydride-grafted polypropylene,polyvinylidene-fluoride, and polyethylene-terephthalate) was characterized. Surface chemical components were identified using XPS. Additionally,transverse 3-point bending tests and single fibre pull-out tests were performed. This integrated physical–chemical–mechanical approach was used to study the effect of adhesion on the mechanical strength of thermoplastic composites reinforced with bamboo,showing that increase in physical adhesion can explain the improved interfacial and longitudinal strength in bamboo polyvinylidene-fluoride (PVDF) composites compared to the other thermoplastic matrices used in this study. Surface energy components of bamboo fibres and PVDF were matched, resulting in an improvement of the physical adhesion.

[1]  A. Bismarck,et al.  Wetting behavior of flax fibers as reinforcement for polypropylene. , 2003, Journal of colloid and interface science.

[2]  T. Blake,et al.  The influence of solid-liquid interactions on dynamic wetting. , 2002, Advances in colloid and interface science.

[3]  Edith Mäder,et al.  How can adhesion be determined from micromechanical tests , 2001 .

[4]  R. Rioboo,et al.  Experimental evidence of the role of viscosity in the molecular kinetic theory of dynamic wetting. , 2011, Langmuir : the ACS journal of surfaces and colloids.

[5]  K. Mittal.  The role of the interface in adhesion phenomena , 1977 .

[6]  D. Bonn,et al.  Wetting and Spreading , 2009 .

[7]  Acid–base surface properties of modified poly(ethylene terephthalate) films and gelatin: Relationship to adhesion , 1991 .

[8]  D. Maniglio,et al.  Recent theoretical and experimental advancements in the application of van Oss–Chaudury–Good acid–base theory to the analysis of polymer surfaces I. General aspects , 2003 .

[9]  M. Chaudhury,et al.  The role of van der Waals forces and hydrogen bonds in “hydrophobic interactions” between biopolymers and low energy surfaces , 1986 .

[10]  L. Girifalco,et al.  A Theory for the Estimation of Surface and Interfacial Energies. I. Derivation and Application to Interfacial Tension , 1957 .

[11]  J. Rosenholm,et al.  Quantitative characterization of the subsurface acid–base properties of wood by XPS and Fowkes theory , 1998 .

[12]  D. Packham.  Work of adhesion: contact angles and contact mechanics , 1996 .

[13]  T. Randall Lee,et al.  The wettability of fluoropolymer surfaces: influence of surface dipoles. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[14]  T. Blake.  The physics of moving wetting lines. , 2006, Journal of colloid and interface science.

[15]  F. Fowkes.  Quantitative characterization of the acid-base properties of solvents, polymers, and inorganic surfaces , 1990 .

[16]  Per Stenius,et al.  Evaluation of surface lignin on cellulose fibers with XPS , 1999 .

[17]  G. Popa,et al.  Poly(Ethylene Terephthalate) Films with Different Content of Acid-Base Functionalities. I. Surface Modifications , 1998 .

[18]  C. Volpe,et al.  Some Reflections on Acid-Base Solid Surface Free Energy Theories , 1997, Journal of colloid and interface science.

[19]  C. Sykes,et al.  Average spreading parameter on heterogeneous surfaces , 1994 .

[20]  S. Barsberg,et al.  Nonequilibrium Phenomena Influencing the Wetting Behavior of Plant Fibers. , 2001, Journal of colloid and interface science.

[21]  J. Schultz,et al.  Relationship between Work of Adhesion and Equilibrium Interatomic Distance at the Interface , 1996 .

[22]  S. Siboni,et al.  Acid–base surface free energies of solids and the definition of scales in the Good–van Oss–Chaudhury theory , 2000 .

[23]  I. Verpoest,et al.  Wetting analysis and surface characterisation of coir fibres used as reinforcement for composites , 2011 .

[24]  J. Månson,et al.  A criterion for optimum adhesion applied to fibre reinforced composites , 1997 .

[25]  J. Balatinecz,et al.  X-ray photoelectron spectroscopy of maleated polypropylene treated wood fibers in a high-intensity thermokinetic mixer , 1999, Wood Science and Technology.

[26]  J. Berg.  Role of Acid-Base Interactions in Wetting and Related Phenomena , 1993 .

[27]  T. Blake,et al.  Experimental investigation of the link between static and dynamic wetting by forced wetting of nylon filament. , 2007, Langmuir.

[28]  I. Verpoest,et al.  Wetting behaviour and surface properties of technical bamboo fibres , 2011 .

[29]  F. Brochard.  Spreading of liquid drops on thin cylinders: The ‘‘manchon/droplet’’ transition , 1986 .

[30]  L. Greszczuk.  Theoretical Studies of the Mechanics of the Fiber-Matrix Interface in Composites , 1969 .

[31]  C. Baillie,et al.  Interfacial characterisation of flax fibre‐thermoplastic polymer composites by the pull‐out test , 1999 .

[32]  I. Verpoest,et al.  Morphological aspects and mechanical properties of single bamboo fibers and flexural characterization of bamboo/ epoxy composites , 2011 .