Experimental Testing and Analytical Modeling of Glulam Moment Connections with Self-Drilling Dowels

AbstractAn experimental and analytical study on rotational behavior of glulam beam-column moment connections with self-drilling dowels (SDDs) is conducted. Connection properties including strength,...

[1]  René Steiger,et al.  State-of-the-art review on timber connections with glued-in steel rods , 2011 .

[2]  Stefano Pampanin,et al.  Shaking table testing of post-tensioned timber frame building with passive energy dissipation systems , 2017, Bulletin of Earthquake Engineering.

[3]  Jeffrey Erochko,et al.  Development and testing of hybrid timber-steel braced frames , 2019, Engineering Structures.

[4]  Philipp Dietsch,et al.  Self-tapping screws and threaded rods as reinforcement for structural timber elements – A state-of-the-art report , 2015 .

[5]  Kei Sawata,et al.  Estimation of shear strength of dowel-type timber connections with multiple slotted-in steel plates by European yield theory , 2006, Journal of Wood Science.

[6]  Minjuan He,et al.  Influence of cracks on the mechanical performance of dowel type glulam bolted joints , 2017 .

[7]  P D Rodd,et al.  High‐performance dowel‐type joints for timber structures , 2003 .

[8]  Alessandro Palermo,et al.  The implications of post-tensioning losses on the seismic response of Pres-Lam frames , 2018, Bulletin of the New Zealand Society for Earthquake Engineering.

[9]  Andrea Frangi,et al.  Experimental and analytical analysis of a post-tensioned timber frame under horizontal loads , 2016 .

[10]  Chun‐Lin Wang,et al.  Experimental investigation of the shear characteristics of steel-to-timber composite joints with inclined self-tapping screws , 2020, Engineering Structures.

[11]  Ulrike Kuhlmann,et al.  Consideration of plasticity within the design of timber structures due to connection ductility , 2011 .

[12]  Robert Kliger,et al.  FRP reinforcement of timber structures , 2015 .

[13]  Minjuan He,et al.  Rotational performance of glulam bolted joints: Experimental investigation and analytical approach , 2019, Construction and Building Materials.

[14]  Renle Ma,et al.  Experimental investigation on lateral performance of pre-stressed tube bolted connection with high initial stiffness , 2016 .

[15]  Frank Lam,et al.  Moment-resisting bolted timber connections , 2010 .

[16]  Minjuan He,et al.  Comparison of glulam post-to-beam connections reinforced by two different dowel-type fasteners , 2015 .

[17]  Minghao Li,et al.  Use of particle tracking velocimetry in timber material and connection testing , 2018, European Journal of Wood and Wood Products.

[18]  Wen-Shao Chang,et al.  Using self-tapping screw to reinforce dowel-type connection in a timber portal frame , 2019 .

[19]  G. MacRae,et al.  Experimental testing of full-scale glulam frames with buckling restrained braces , 2020, Engineering Structures.

[20]  A. H. Buchanan,et al.  Seismic design of glulam structures , 1993 .

[21]  Ajm Ad Leijten,et al.  Advances in moment transfering dvw reinforced timber connections : analysis and experimental verification, Part 1 , 2013 .

[22]  Stefano Pampanin,et al.  Post-Tensioned Glulam Beam-Column Joints with Advanced Damping Systems: Testing and Numerical Analysis , 2014 .

[23]  Ahmed Y. Elghazouli,et al.  Behaviour of hybrid timber beam-to-tubular steel column moment connections , 2017 .

[25]  K. W. Johansen,et al.  Theory of Timber Connections , 1949 .

[26]  Xianglin Gu,et al.  Bolted glulam beam-column connections under different combinations of shear and bending , 2019, Engineering Structures.

[27]  Stefano Pampanin,et al.  Seismic Performance of Full-Scale Post-Tensioned Timber Beam-Column Connections , 2016 .

[28]  Massimo Fragiacomo,et al.  Experimental–numerical investigation on the seismic behaviour of moment-resisting timber frames with densified veneer woodreinforced timber joints and expanded tube fasteners , 2017 .

[29]  Xiaofeng Sun,et al.  Novel engineered wood and bamboo composites for structural applications: State-of-art of manufacturing technology and mechanical performance evaluation , 2020 .

[30]  Weiqing Liu,et al.  A component method for moment-resistant glulam beam–column connections with glued-in steel rods , 2016 .