Protection of Zn-Mg-Al coated steel corrosion by cerium gluconate in 0.05 M NaCl solution
暂无分享,去创建一个
[1] Z. Dong,et al. A pH-responsive cerium-imidazole decorated ZIF-8 to achieve self-healing barrier property for epoxy coating on Al alloy by controlled release , 2022, Progress in Organic Coatings.
[2] L. M. Durosinmi,et al. Investigating the synergism of some hydrazinecarboxamides and iodide ions as corrosion inhibitor formulations for mild steel in hydrochloric Acid: Experimental and computational studies , 2021, Journal of Molecular Liquids.
[3] B. Zargar,et al. Corrosion protection evaluation of Allium Jesdianum as a novel and green source inhibitor for mild steel in 1M HCl solution , 2021, Journal of Molecular Liquids.
[4] Xiaoyun Zhang,et al. Bis-Mannich bases as effective corrosion inhibitors for N80 steel in 15% HCl medium , 2021, Journal of Molecular Liquids.
[5] Q. Lin,et al. A new pyridazine derivative synthesized as an efficient corrosion inhibitor for copper in sulfuric acid medium: Experimental and theoretical calculation studies , 2021 .
[6] Hailin Zhu,et al. Study on corrosion inhibition behavior and adsorption mechanism of novel synthetic surfactants for carbon steel in 1 M HCl solution , 2021, Sustainable Chemistry and Pharmacy.
[7] Geraint Williams,et al. The use of anion exchange pigments to inhibit the filiform corrosion of zinc-aluminium-magnesium coated steel , 2021, Corrosion Science.
[8] O. R. Mattos,et al. Electrochemical and surface enhanced Raman spectroscopy study of Guanine as corrosion inhibitor for copper , 2021 .
[9] M. Nabid,et al. Modified hydroxyethyl cellulose as a highly efficient eco-friendly inhibitor for suppression of mild steel corrosion in a 15% HCl solution at elevated temperatures , 2021 .
[10] M. Taleb,et al. Chemical, electrochemical, quantum, and surface analysis evaluation on the inhibition performance of novel imidazo[4,5-b] pyridine derivatives against mild steel corrosion , 2021 .
[11] Y. Qiang,et al. Superhydrophobic and smart MgAl-LDH anti-corrosion coating on AZ31 Mg surface , 2021 .
[12] K. Rhee,et al. Phthalocyanine, naphthalocyanine and their derivatives as corrosion inhibitors: A review , 2021, Journal of Molecular Liquids.
[13] C. Fu,et al. Comprehensive investigation of modified polyethyleneimine as an efficient polymeric corrosion inhibitor in neutral medium: Synthesis, experimental and theoretical assessments , 2021 .
[14] Juan Zhou,et al. Corrosion inhibition efficiency of compound nitrite with D-sodium gluconate on carbon steel in simulated concrete pore solution , 2021 .
[15] D. S. Chauhan,et al. Development of environmentally benign corrosion inhibitors for organic acid environments for oil-gas industry , 2021 .
[16] Y. Qiang,et al. Synthesizing a novel fluorinated reduced graphene oxide-CeO2 hybrid nanofiller to achieve highly corrosion protection for waterborne epoxy coatings , 2021 .
[17] Xiaofen Li,et al. Intra-/inter-molecular synergistic inhibition effect of sulfonate surfactant and 2-benzothiazolethiol on carbon steel corrosion in 3.5% NaCl solution , 2021 .
[18] E. Alibakhshi,et al. Theoretical design coupled with experimental study of the effectiveness of the inhibitive molecules based on Cynara scolymus L extract toward chloride-induced corrosion of steel , 2021 .
[19] F. Andreatta,et al. The synergistic effect of cerium acetate and sodium sulphate on corrosion inhibition of AA2024-T3 at various temperatures , 2021 .
[20] K. Kassim,et al. Adsorption and corrosion inhibition accomplishment for thiosemicarbazone derivatives for mild steel in 1.0 M HCl medium: Electrochemical, XPS and DFT studies , 2021 .
[21] Geraint Williams,et al. The effect of composition and thickness on the mechanism and kinetics of filiform corrosion occurring on zinc-aluminium-magnesium coated steel , 2021, Corrosion Science.
[22] M. Montemor,et al. Cerium phosphate-based inhibitor for smart corrosion protection of WE43 magnesium alloy , 2021 .
[23] B. Ramezanzadeh,et al. Synergistic corrosion inhibition effects of the non-hazardous cerium nitrate and tannic acid polyphenolic molecules on the surface of mild-steel in chloride-containing solution: Detailed surface and electrochemical explorations , 2020, Journal of Molecular Liquids.
[24] Xiaobo Chen,et al. Ce addition enhances the microbially induced corrosion resistance of Cu-bearing 2205 duplex stainless steel in presence of sulfate reducing bacteria , 2020 .
[25] S. Mehraban,et al. The ability of Mg2Ge crystals to behave as ‘smart release’ inhibitors of the aqueous corrosion of Zn-Al-Mg alloys , 2020 .
[26] A. Kokalj,et al. Synergistic effect of 2-mercaptobenzimidazole and octylphosphonic acid as corrosion inhibitors for copper and aluminium – An electrochemical, XPS, FTIR and DFT study , 2020 .
[27] Hailin Zhu,et al. Synthesis, experimental and theoretical studies of triazine derivatives with surface activity as effective corrosion inhibitors for medium carbon steel in acid medium , 2020 .
[28] Moses M Solomon,et al. Benzotriazole derivative as an effective corrosion inhibitor for low carbon steel in 1 M HCl and 1 M HCl + 3.5 wt% NaCl solutions , 2020 .
[29] M. Montemor,et al. Novel smart and self-healing cerium phosphate-based corrosion inhibitor for AZ31 magnesium alloy , 2020 .
[30] M. Finšgar. Electrochemical, 3D topography, XPS, and ToF-SIMS analyses of 4-methyl-2-phenylimidazole as a corrosion inhibitor for brass , 2020 .
[31] Shun-Yi Jian,et al. Robust corrosion resistance and self-healing characteristics of a novel Ce / Mn conversion coatings on EV31 magnesium alloys , 2020, Applied Surface Science.
[32] P. C. Okafor,et al. Corrosion inhibition and adsorption properties of cerium-amino acid complexes on mild steel in acidic media: Experimental and DFT studies , 2020 .
[33] E. Ebenso,et al. Highly functionalized epoxy macromolecule as an anti-corrosive material for carbon steel: Computational (DFT, MDS), surface (SEM-EDS) and electrochemical (OCP, PDP, EIS) studies , 2020 .
[34] D. Thierry,et al. Corrosion of hot‐dip‐galvanised steel and zinc alloy‐coated steel in ammonia and ammonium chloride , 2020, Materials and Corrosion.
[35] R. Akid,et al. Corrosion protection mechanism of Ce4+/organic inhibitor for AA2024 in 3.5% NaCl , 2020, RSC advances.
[36] Jingjing Xu,et al. Sunflower Head Pectin with Different Molecular Weights as Promising Green Corrosion Inhibitors of Carbon Steel in Hydrochloric Acid Solution , 2019, ACS omega.
[37] C. Riener,et al. Influence of microstructure of zinc-aluminium-magnesium alloy coated steel on the corrosion behavior in outdoor marine atmosphere , 2019, Surface and Coatings Technology.
[38] I. Milošev,et al. The influence of additional salts on corrosion inhibition by cerium(III) acetate in the protection of AA7075-T6 in chloride solution , 2019, Corrosion Science.
[39] D. Thierry,et al. Atmospheric corrosion of ZnAlMg coated steel during long term atmospheric weathering at different worldwide exposure sites , 2019, Corrosion Science.
[40] R. Shrivastava,et al. A new insight into corrosion inhibition mechanism of copper in aerated 3.5 wt.% NaCl solution by eco-friendly Imidazopyrimidine Dye: experimental and theoretical approach , 2019, Chemical Engineering Journal.
[41] E. Ebenso,et al. Organic corrosion inhibitors for industrial cleaning of ferrous and non-ferrous metals in acidic solutions: A review , 2018 .
[42] D. Thierry,et al. Atmospheric Corrosion of Zinc-Aluminum Alloyed Coated Steel in Depleted Carbon Dioxide Environments , 2018 .
[43] D. Gonbeau,et al. An Auger and XPS survey of cerium active corrosion protection for AA2024-T3 aluminum alloy , 2016 .
[44] F. Goodwin,et al. Improving corrosion stability of ZnAlMg by alloying for protection of car bodies , 2016 .
[45] D. Thierry,et al. Effect of the microstructure of Zn-Al and Zn-Al-Mg model alloys on corrosion stability , 2016 .
[46] I. Milošev,et al. Cerium Chloride and Acetate Salts as Corrosion Inhibitors for Aluminum Alloy AA7075-T6 in Sodium Chloride Solution , 2016 .
[47] V. Alar,et al. Synergistic inhibition of carbon steel corrosion in seawater by cerium chloride and sodium gluconate , 2015 .
[48] A. Hughes,et al. The influence of rare earth mercaptoacetate on the initiation of corrosion on AA2024-T3 Part I: Average statistics of each intermetallic composition , 2015 .
[49] E. Han,et al. Cerium tartrate as a corrosion inhibitor for AA 2024-T3 , 2015 .
[50] P. Volovitch,et al. Corrosion mechanisms of Zn(Mg, Al) coated steel in accelerated tests and natural exposure: 1. The role of electrolyte composition in the nature of corrosion products and relative corrosion rate , 2015 .
[51] P. Volovitch,et al. Corrosion mechanisms of Zn(Mg,Al) coated steel: 2. The effect of Mg and Al alloying on the formation and properties of corrosion products in different electrolytes , 2015 .
[52] D. Thierry,et al. Characterization of corrosion products of Zn and Zn–Mg–Al coated steel in a marine atmosphere , 2014 .
[53] D. Thierry,et al. Composition of corrosion products formed on Zn–Mg, Zn–Al and Zn–Al–Mg coatings in model atmospheric conditions , 2014 .
[54] A. Hughes,et al. The use of cerium and praseodymium mercaptoacetate as thiol-containing inhibitors for AA2024-T3 , 2014 .
[55] D. Thierry,et al. In situ infrared reflection spectroscopy studies of the initial atmospheric corrosion of Zn–Al–Mg coated steel , 2013 .
[56] A. Hughes,et al. Unravelling the corrosion inhibition mechanisms of bi-functional inhibitors by EIS and SEM–EDS , 2013 .
[57] V. Kozhukharov,et al. Comparison between the inhibition efficiencies of Ce(III) and Ce(IV) ammonium nitrates against corrosion of AA2024 aluminum alloy in solutions of low chloride concentration , 2012 .
[58] T. Vu,et al. Understanding corrosion via corrosion product characterization: II. Role of alloying elements in improving the corrosion resistance of Zn–Al–Mg coatings on steel , 2011 .
[59] E. Han,et al. Corrosion protection of aluminium alloy 2024-T3 in 0.05 M NaCl by cerium cinnamate , 2011 .
[60] M. Wittmar,et al. Protective abilities of nanocomposite coatings containing Al2O3 nano-particles loaded by CeCl3 , 2011 .
[61] M. Forsyth,et al. Corrosion inhibition of 7000 series aluminium alloys with cerium diphenyl phosphate , 2011 .
[62] Johannes M. C. Mol,et al. High-throughput channel arrays for inhibitor testing: Proof of concept for AA2024-T3 , 2009 .
[63] P. Volovitch,et al. Understanding corrosion via corrosion product characterization: I. Case study of the role of Mg alloying in Zn–Mg coating on steel , 2009 .
[64] K. Draoui,et al. Corrosion inhibition of AA6060 aluminium alloy by lanthanide salts in chloride solution , 2009 .
[65] H. Fu,et al. Synergism between rare earth cerium(IV) ion and vanillin on the corrosion of steel in H2SO4 solution: Weight loss, electrochemical, UV–vis, FTIR, XPS, and AFM approaches , 2008 .
[66] A. Decroly,et al. Study of the deposition of cerium oxide by conversion on to aluminium alloys , 2005 .
[67] G. Deacon,et al. ATR characterisation of synergistic corrosion inhibition of mild steel surfaces by cerium salicylate , 2002 .
[68] K. Aramaki. Cerium(III) chloride and sodium octylthiopropionate as an effective inhibitor mixture for zinc corrosion in 0.5 M NaCl , 2002 .
[69] Kezheng Chen,et al. Self-healing performance and corrosion resistance of phytic acid/cerium composite coating on microarc-oxidized magnesium alloy , 2022 .