Modeling and analysis of voltage controlled positive output synchronous buck-boost converter

Now a day's use of portable devices increasing more. Such as cellular phones, digital cameras and high efficient power managing modules etc. are demanding for low output voltage ripple with fast transient response. The terminal voltage of the battery used in portable applications varies particularly depending on state of their charging conditions. In this paper, Li-ion battery is considered that provides 4.2V when it is fully charged and drops to 2.7V when fully discharged. However, the system requires a constant output voltage of 3.3V under varying load conditions. Thus, this work addresses the design and modeling of voltage controlled positive output synchronous buck-boost converter. Simulation model is developed using MATLAB/Simulink and results analysis has been carried out.

[1]  S. P. Dubey,et al.  Voltage mode control of coupled inductor bidirectional DC to DC converter , 2010, 2010 IEEE International Conference of Electron Devices and Solid-State Circuits (EDSSC).

[2]  A. Khaligh,et al.  Combination of Buck and Boost Modes to Minimize Transients in the Output of a Positive Buck-Boost Converter , 2006, IECON 2006 - 32nd Annual Conference on IEEE Industrial Electronics.

[3]  Chia-Ling Wei,et al.  Design of an Average-Current-Mode Noninverting Buck–Boost DC–DC Converter With Reduced Switching and Conduction Losses , 2012, IEEE Transactions on Power Electronics.

[4]  Ali Emadi,et al.  A Compensation Technique for Smooth Transitions in Non-inverting Buck-Boost Converter , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[5]  Wonsuk Choi,et al.  Consideration to minimize power losses in synchronous rectification , 2011, 8th International Conference on Power Electronics - ECCE Asia.

[6]  Chia-Ling Wei,et al.  Single-inductor four-switch non-inverting buck-boost dc-dc converter , 2011, Proceedings of 2011 International Symposium on VLSI Design, Automation and Test.

[7]  S. P. Dubey,et al.  Design and analysis of coupled inductor bidirectional DC-DC convertor for high-voltage diversity applications , 2012 .

[8]  Xinbo Ruan,et al.  Four Switch Buck-Boost Converter for Telecom DC-DC power supply applications , 2008, 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition.