The Effects of Temperature on the Hydrothermal Synthesis of Hydroxyapatite-Zeolite Using Blast Furnace Slag

Blast furnace slag, an industrial by-product, is emerging as a potential raw material to synthesize hydroxyapatite and zeolite. In this study, the effects of temperature on the hydrothermal synthesis of hydroxyapatite-zeolite from blast furnace slag were investigated. Specimens were synthesized at different temperatures (room temperature, 50, 90, 120, or 150 °C). The synthesized specimens were analyzed qualitatively and quantitatively via X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), BET/BJH, and scanning electron microscopy/energy dispersive using X-ray analysis (SEM/EDX). It was found that the hydroxyapatite phase was synthesized at all the reaction temperatures, while faujasite type zeolite appeared in the specimens synthesized at 90 and 120 °C. Moreover, faujasite was replaced by hydroxysodalite in the specimens synthesized at 150 °C. Additionally, the crystals of the hydroxyapatite tended to become larger and total crystallinity increased as the reaction temperature increased.

[1]  H. Lee,et al.  Evolution of zeolite crystals in geopolymer-supported zeolites: effects of composition of starting materials , 2019, Materials Letters.

[2]  N. Abbas,et al.  Synthesis of geopolymer-supported zeolites via robust one-step method and their adsorption potential. , 2018, Journal of hazardous materials.

[3]  Shuilin Zheng,et al.  One-Step Hydrothermal Synthesis of Zeolite X Powder from Natural Low-Grade Diatomite , 2018, Materials.

[4]  Peng Li,et al.  NaA zeolite derived from blast furnace slag: its application for ammonium removal. , 2017, Water science and technology : a journal of the International Association on Water Pollution Research.

[5]  H. Lee,et al.  Adsorption characteristics of cesium onto mesoporous geopolymers containing nano-crystalline zeolites , 2017 .

[6]  H. Lee,et al.  Alkali activated slag pastes with surface-modified blast furnace slag , 2017 .

[7]  H. Lee,et al.  Synthesis of mesoporous geopolymers containing zeolite phases by a hydrothermal treatment , 2016 .

[8]  Jinhuai Liu,et al.  Performance of novel hydroxyapatite nanowires in treatment of fluoride contaminated water. , 2016, Journal of hazardous materials.

[9]  Yang Li,et al.  Hydrothermal synthesis of mixtures of NaA zeolite and sodalite from Ti-bearing electric arc furnace slag , 2016 .

[10]  N. Abu-Zahra,et al.  Hydrothermal synthesis of hydroxy sodalite from fly ash for the removal of lead ions from water , 2016, International Journal of Environmental Science and Technology.

[11]  T. Daou,et al.  The influence of the nature of organosilane surfactants and their concentration on the formation of hierarchical FAU-type zeolite nanosheets , 2015 .

[12]  Hao Wang,et al.  Fly ash-based geopolymers: The relationship between composition, pore structure and efflorescence , 2014 .

[13]  W. Świȩszkowski,et al.  Highly biocompatible, nanocrystalline hydroxyapatite synthesized in a solvothermal process driven by high energy density microwave radiation , 2013, International journal of nanomedicine.

[14]  Y. Leng,et al.  Growth of one-dimensional single-crystalline hydroxyapatite nanorods , 2012 .

[15]  Mingguo Ma Hierarchically nanostructured hydroxyapatite: hydrothermal synthesis, morphology control, growth mechanism, and biological activity , 2012, International journal of nanomedicine.

[16]  Quanwen Liu,et al.  Hydrothermal synthesis of hierarchical hydroxyapatite: Preparation, growth mechanism and drug release property , 2012 .

[17]  F. Cavalcante,et al.  Synthesis of zeolite from Italian coal fly ash: differences in crystallization temperature using seawater instead of distilled water. , 2010, Waste management.

[18]  H. Yamashita,et al.  A novel synthetic route to hydroxyapatite–zeolite composite material from steel slag: investigation of synthesis mechanism and evaluation of physicochemical properties , 2009 .

[19]  H. Yamashita,et al.  Synthesis of Hydroxyapatite–Zeolite Composite Material from Disposed Steel Slag and Investigation of Its Structural and Physicochemical Characteristics , 2009 .

[20]  M. Lombardi,et al.  Si-substituted hydroxyapatite nanopowders: synthesis, thermal stability and sinterability , 2009 .

[21]  Youngjin Jeong,et al.  The removal of heavy metals in aqueous solution by hydroxyapatite/cellulose composite , 2008 .

[22]  Christopher J. Koroneos,et al.  Utilization of steel slag for Portland cement clinker production. , 2008, Journal of hazardous materials.

[23]  Say Chye Joachim Loo,et al.  Synthesis and hydrothermal treatment of nanostructured hydroxyapatite of controllable sizes , 2008, Journal of materials science. Materials in medicine.

[24]  S. Mignardi,et al.  Copper and zinc decontamination from single- and binary-metal solutions using hydroxyapatite. , 2007, Journal of hazardous materials.

[25]  Xiao‐nong Cheng,et al.  Size-controlled synthesis of hydroxyapatite nanorods in the presence of organic modifiers , 2007 .

[26]  O. Clarkin,et al.  Phase transformations of calcium phosphates formed in wet field environments , 2007 .

[27]  Yingjun Wang,et al.  Hydrothermal synthesis of hydroxyapatite nanopowders using cationic surfactant as a template , 2006 .

[28]  M. Shaw,et al.  Influence of temperature and concentration on the sintering behavior and mechanical properties of hydroxyapatite , 2004 .

[29]  K. Byrappa,et al.  Synthesis, characterization, and dispersion properties of hydroxyapatite prepared by mechanochemical–hydrothermal methods , 2004 .

[30]  D. Cicerone,et al.  Natural materials for treatment of industrial effluents: comparative study of the retention of Cd, Zn and Co by calcite and hydroxyapatite. Part I: batch experiments. , 2004, Journal of environmental management.

[31]  W. Xiaohua,et al.  Hydroxyapatite coating on porous silicon substrate obtained by precipitation process , 2004 .

[32]  E. Kendrick,et al.  Synthesis, properties and structure of ion exchanged hydrosodalite , 2004 .

[33]  K. Byrappa,et al.  Mechanochemical-hydrothermal synthesis of calcium phosphate powders with coupled magnesium and carbonate substitution , 2004 .

[34]  G. Flamant,et al.  Removal of Lead (Pb) by Hydroxyapatite Sorbent , 2004 .

[35]  Angel Lopez-Soler,et al.  Synthesis of zeolites from coal fly ash: an overview , 2002 .

[36]  H Motz,et al.  Products of steel slags an opportunity to save natural resources. , 2001, Waste management.

[37]  L. Huang,et al.  A study of the process and kinetics of electrochemical deposition and the hydrothermal synthesis of hydroxyapatite coatings , 2000, Journal of materials science. Materials in medicine.

[38]  J. Lindgren,et al.  FTIR study of water in cast Nafion films , 2000 .

[39]  M. Fontes,et al.  Phosphate adsorption by clays from Brazilian Oxisols: relationships with specific surface area and mineralogy , 1996 .

[40]  Ron Jenkins,et al.  Introduction to X-ray powder diffractometry , 1996 .

[41]  N. Sugano,et al.  Experimental studies on a new bioactive bone cement: hydroxyapatite composite resin. , 1994, Biomaterials.

[42]  P. Chiang,et al.  Use of sewage sludge for manufacturing adsorbents , 1987 .

[43]  D. Roy,et al.  Hydroxyapatite formed from Coral Skeletal Carbonate by Hydrothermal Exchange , 1974, Nature.