Uncovering Two Competing Switching Mechanisms for Epitaxial and Ultrathin Strontium Titanate-Based Resistive Switching Bits.

Resistive switches based on anionic electronic conducting oxides are promising devices to replace transistor-based memories due to their excellent scalability and low power consumption. In this study, we create a model switching system by manufacturing resistive switches based on ultrathin 5 nm, epitaxial, and grain boundary-free strontium titanate thin films with subnanometer surface roughness. For our model devices, we unveil two competing nonvolatile resistive switching processes being of different polarities: one switching in clockwise and the other in counterclockwise direction. They can be activated selectively with respect to the effective switching voltage and time applied to the device. Combined analysis of both processes with electrical DC-methods and electrochemical impedance spectroscopy reveals that the first resistive switching process is filament-based and exhibits counterclockwise bipolar resistive switching. The R(OFF)/R(ON) resistance ratio of this process is extremely stable and can be tuned in the range 5-25 depending on the switching voltage and time. Excitingly, at high electric field strength a second bipolar resistive switching process was found. This process is clockwise and, therefore, reveals the opposite polarity switching direction when compared to the first one. Both processes do not obstruct each other, consequently, stable 1, 2, or even 3 crossover current-voltage (I-V) characteristics can be addressed for the memory bits. Equivalent circuit model analysis and fitting of impedance characteristics unequivocally show for the created grain boundary free switches that the oxide's defects and its carrier distribution close to the electrode interface contribute to the resistive switching mechanism. The addressability of two sets of resistive ON and OFF states in one device through electric field strength and switching time offers exciting new operation schemes for memory devices.

[1]  Shimeng Yu,et al.  Metal–Oxide RRAM , 2012, Proceedings of the IEEE.

[2]  Markus Kubicek,et al.  How Does Moisture Affect the Physical Property of Memristance for Anionic–Electronic Resistive Switching Memories? , 2015 .

[3]  L. Chua.  Memristor-The missing circuit element , 1971 .

[4]  R. Waser,et al.  Switching the electrical resistance of individual dislocations in single-crystalline SrTiO3 , 2006, Nature materials.

[5]  M. Ohring.  Chapter 7 – Substrate Surfaces and Thin-Film Nucleation , 2002 .

[6]  G. Shivashankar,et al.  Low-temperature electronic properties of a normal conducting perovskite oxide (LaNiO3) , 1991 .

[7]  A. Sawa,et al.  Electrical properties and colossal electroresistance of heteroepitaxial Sr Ru O 3 ∕ Sr Ti 1 − x Nb x O 3 ( 0.0002 ⩽ x ⩽ 0.02 ) Schottky junctions , 2007 .

[8]  Shimeng Yu,et al.  On the Switching Parameter Variation of Metal-Oxide RRAM—Part I: Physical Modeling and Simulation Methodology , 2012, IEEE Transactions on Electron Devices.

[9]  P. Paufler,et al.  Low-temperature domain behaviour of a SrTiO3 (001) single-crystal plate , 2007 .

[10]  Daesung Park,et al.  Scaling Potential of Local Redox Processes in Memristive SrTiO $_{3}$ Thin-Film Devices , 2012, Proceedings of the IEEE.

[11]  R. Waser,et al.  Generic relevance of counter charges for cation-based nanoscale resistive switching memories. , 2013, ACS nano.

[12]  D. Ielmini,et al.  Conductive-filament switching analysis and self-accelerated thermal dissolution model for reset in NiO-based RRAM , 2007, 2007 IEEE International Electron Devices Meeting.

[13]  Xin Guo,et al.  Roles of Schottky barrier and oxygen vacancies in the electroforming of SrTiO3 , 2012 .

[14]  S. Hyun,et al.  Effects of strain on the dielectric properties of tunable dielectric SrTiO3 thin films , 2001 .

[15]  Markus Kubicek,et al.  A microdot multilayer oxide device: let us tune the strain-ionic transport interaction. , 2014, ACS nano.

[16]  A. Sawa,et al.  Relationship between resistive switching characteristics and band diagrams of Ti / Pr 1 − x Ca x MnO 3 junctions , 2009 .

[17]  Xue-Bing Yin,et al.  The role of Schottky barrier in the resistive switching of SrTiO3: direct experimental evidence. , 2015, Physical chemistry chemical physics : PCCP.

[18]  Rotraut Merkle,et al.  How is oxygen incorporated into oxides? A comprehensive kinetic study of a simple solid-state reaction with SrTiO3 as a model material. , 2008, Angewandte Chemie.

[19]  J. Campo,et al.  Synthesis and structural study of LaNi1-xMnxO3+δ perovskites , 2002 .

[20]  Dmitri B. Strukov,et al.  Donor‐Induced Performance Tuning of Amorphous SrTiO3 Memristive Nanodevices: Multistate Resistive Switching and Mechanical Tunability , 2015 .

[21]  Jürgen Fleig,et al.  The grain boundary impedance of random microstructures: numerical simulations and implications for the analysis of experimental data , 2002 .

[22]  W. E. Beadle,et al.  Switching properties of thin Nio films , 1964 .

[23]  T. Weirich,et al.  Behavior of oxygen vacancies in single-crystal SrTiO3: Equilibrium distribution and diffusion kinetics , 2012 .

[24]  A. Sawa.  Resistive switching in transition metal oxides , 2008 .

[25]  M. Ohring.  Chapter 9 – Film Structure , 2002 .

[26]  Juho Kim,et al.  Strain manipulation in BaTiO3/SrTiO3 artificial lattice toward high dielectric constant and its nonlinearity , 2003 .

[27]  Rainer Waser,et al.  Realization of regular arrays of nanoscale resistive switching blocks in thin films of Nb-doped SrTiO3 , 2008 .

[28]  Shimeng Yu,et al.  Conduction mechanism of TiN/HfOx/Pt resistive switching memory: A trap-assisted-tunneling model , 2011 .

[29]  R. Dittmann,et al.  Do dislocations act as atomic autobahns for oxygen in the perovskite oxide SrTiO3? , 2014, Nanoscale.

[30]  Kijung Yong,et al.  A Light Incident Angle Switchable ZnO Nanorod Memristor: Reversible Switching Behavior Between Two Non‐Volatile Memory Devices , 2013, Advanced materials.

[31]  J. Yang,et al.  Memristive switching mechanism for metal/oxide/metal nanodevices. , 2008, Nature nanotechnology.

[32]  J. Yang,et al.  A Family of Electronically Reconfigurable Nanodevices , 2009 .

[33]  R. Dittmann,et al.  Impact of Defect Distribution on Resistive Switching Characteristics of Sr2TiO4 Thin Films , 2010, Advanced materials.

[34]  Tunability of the dielectric response of epitaxially strained SrTiO3 from first principles , 2004, cond-mat/0407077.

[35]  Lixin Sun,et al.  Dislocations in SrTiO3: easy to reduce but not so fast for oxygen transport. , 2015, Journal of the American Chemical Society.

[36]  R. Dittmann,et al.  Coexistence of Filamentary and Homogeneous Resistive Switching in Fe‐Doped SrTiO3 Thin‐Film Memristive Devices , 2010, Advanced materials.

[37]  Markus Kubicek,et al.  Memristor Kinetics and Diffusion Characteristics for Mixed Anionic‐Electronic SrTiO3‐δ Bits: The Memristor‐Based Cottrell Analysis Connecting Material to Device Performance , 2014 .

[38]  R. Waser,et al.  Nanoionics-based resistive switching memories. , 2007, Nature materials.

[39]  R. Williams,et al.  Coupled ionic and electronic transport model of thin-film semiconductor memristive behavior. , 2009, Small.

[40]  Myoung-Jae Lee,et al.  Anomalous effect due to oxygen vacancy accumulation below the electrode in bipolar resistance switching Pt/Nb:SrTiO3 cells , 2014 .

[41]  A. Bostwick,et al.  Impact of vacancy clusters on characteristic resistance change of nonstoichiometric strontium titanate nano-film , 2014 .

[42]  Rainer Waser,et al.  Separation of bulk and interface contributions to electroforming and resistive switching behavior of epitaxial Fe-doped SrTiO3 , 2009 .

[43]  H. Boysen,et al.  Room temperature structure of LaAlO3 , 2000 .

[44]  B. Yildiz.  “Stretching” the energy landscape of oxides—Effects on electrocatalysis and diffusion , 2014 .

[45]  Ellen Ivers-Tiffée,et al.  Electronic Structure, Defect Chemistry, and Transport Properties of SrTi1-xFexO3-y Solid Solutions , 2006 .

[46]  C. Jia,et al.  Atom vacancies at a screw dislocation core in SrTiO3 , 2006 .

[47]  Ju Gao,et al.  Effects of substrate on the dielectric and tunable properties of epitaxial SrTiO3 thin films , 2006 .

[48]  T. W. Hickmott.  LOW-FREQUENCY NEGATIVE RESISTANCE IN THIN ANODIC OXIDE FILMS , 1962 .

[49]  Heng-Yuan Lee,et al.  Resistance instabilities in a filament-based resistive memory , 2013, 2013 IEEE International Reliability Physics Symposium (IRPS).

[50]  R. Dittmann,et al.  Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges , 2009, Advanced materials.

[51]  D. Ielmini,et al.  Modeling the Universal Set/Reset Characteristics of Bipolar RRAM by Field- and Temperature-Driven Filament Growth , 2011, IEEE Transactions on Electron Devices.

[52]  F. Berkemeier,et al.  On the physical interpretation of constant phase elements , 2009 .

[53]  Alessandro Calderoni,et al.  Statistical Fluctuations in HfOx Resistive-Switching Memory: Part I - Set/Reset Variability , 2014, IEEE Transactions on Electron Devices.

[54]  H. Kiessig.  Untersuchungen zur Totalreflexion von Röntgenstrahlen , 1931 .