Correlating photovoltaic properties of a PTB7-Th:PC71BM blend to photophysics and microstructure as a function of thermal annealing

Selective optimisation of light harvesting materials and interface properties has brought breakthroughs in power conversion efficiency (11–12%) of organic photovoltaics (OPVs). However to translate this promising efficiency to economically viable applications, long term stability is a fundamental requirement. A number of degradation pathways, both extrinsic and intrinsic, reduce the long term stability of OPVs. Here, the photovoltaic properties of a highly efficient bulk heterojunction PTB7-Th:PC71BM blend were investigated as a function of ex situ thermal annealing. The changes in charge generation, separation, and transport due to thermal annealing were measured and related to changes in the microstructure and photovoltaic performance. A 30% drop in the power conversion efficiency of PTB7-Th:PC71BM blends upon thermal annealing at 150 °C was identified as mainly due to morphological instability induced by strong phase separation of donor and acceptor molecules of the blend films. Based on the insight gained from these investigations, enhanced thermal stability was demonstrated by replacing the PC71BM fullerene acceptor with a non-fullerene acceptor ITIC, for which power conversion efficiency dropped only by 9% upon thermal annealing at 150 °C.

[1]  P. Müller‐Buschbaum,et al.  Codependence between Crystalline and Photovoltage Evolutions in P3HT:PCBM Solar Cells Probed with in-Operando GIWAXS. , 2017, ACS applied materials & interfaces.

[2]  Ifor D. W. Samuel,et al.  Light Harvesting for Organic Photovoltaics , 2016, Chemical reviews.

[3]  B. Philippa,et al.  The Role of Space Charge Effects on the Competition between Recombination and Extraction in Solar Cells with Low-Mobility Photoactive Layers. , 2016, The journal of physical chemistry letters.

[4]  C. Burger,et al.  Morphological Degradation in Low Bandgap Polymer Solar Cells – An In Operando Study , 2016 .

[5]  Fujun Zhang,et al.  Alloy Acceptor: Superior Alternative to PCBM toward Efficient and Stable Organic Solar Cells , 2016, Advanced materials.

[6]  Feng Gao,et al.  Fullerene‐Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability , 2016, Advanced materials.

[7]  Mohamed Masmoudi,et al.  Review on organic solar cells , 2016, 2016 13th International Multi-Conference on Systems, Signals & Devices (SSD).

[8]  Andrew J Pearson,et al.  Critical light instability in CB/DIO processed PBDTTT-EFT:PC71BM organic photovoltaic devices , 2016 .

[9]  H. Ade,et al.  Efficient organic solar cells processed from hydrocarbon solvents , 2016, Nature Energy.

[10]  Bertrand J. Tremolet de Villers,et al.  Removal of Residual Diiodooctane Improves Photostability of High-Performance Organic Solar Cell Polymers , 2016 .

[11]  Sungho Nam,et al.  Inverted polymer fullerene solar cells exceeding 10% efficiency with poly(2-ethyl-2-oxazoline) nanodots on electron-collecting buffer layers , 2015, Nature Communications.

[12]  R. Dauskardt,et al.  Thermal cycling effect on mechanical integrity of inverted polymer solar cells , 2015 .

[13]  Thomas M. Brown,et al.  Procedures and Practices for Evaluating Thin‐Film Solar Cell Stability , 2015 .

[14]  I. Samuel,et al.  Mercaptophosphonic acids as efficient linkers in quantum dot sensitized solar cells , 2015 .

[15]  Luping Yu,et al.  Recent Advances in Bulk Heterojunction Polymer Solar Cells. , 2015, Chemical reviews.

[16]  Yuhang Liu,et al.  Efficient non-fullerene polymer solar cells enabled by tetrahedron-shaped core based 3D-structure small-molecular electron acceptors , 2015 .

[17]  F. Krebs,et al.  Comparative Indoor and Outdoor Degradation of Organic Photovoltaic Cells via Inter-laboratory Collaboration , 2015, 2015 IEEE 42nd Photovoltaic Specialist Conference (PVSC).

[18]  A. Amassian,et al.  Polymer Solar Cells with Efficiency >10% Enabled via a Facile Solution‐Processed Al‐Doped ZnO Electron Transporting Layer , 2015 .

[19]  Xiong Gong,et al.  Single-junction polymer solar cells with over 10% efficiency by a novel two-dimensional donor-acceptor conjugated copolymer. , 2015, ACS applied materials & interfaces.

[20]  Feng Liu,et al.  Single-junction polymer solar cells with high efficiency and photovoltage , 2015, Nature Photonics.

[21]  C. Deibel,et al.  The Effect of Diiodooctane on the Charge Carrier Generation in Organic Solar Cells Based on the Copolymer PBDTTT-C , 2015, Scientific Reports.

[22]  Yongfang Li,et al.  Single‐Junction Polymer Solar Cells Exceeding 10% Power Conversion Efficiency , 2015, Advanced materials.

[23]  Daoben Zhu,et al.  An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells , 2015, Advanced materials.

[24]  Yu-Shan Cheng,et al.  Single Junction Inverted Polymer Solar Cell Reaching Power Conversion Efficiency 10.31% by Employing Dual-Doped Zinc Oxide Nano-Film as Cathode Interlayer , 2014, Scientific Reports.

[25]  Aram Amassian,et al.  Efficient inverted bulk-heterojunction solar cells from low-temperature processing of amorphous ZnO buffer layers , 2014 .

[26]  James C. Blakesley,et al.  Towards reliable charge-mobility benchmark measurements for organic semiconductors , 2014 .

[27]  R. Friend,et al.  Bimolecular recombination in organic photovoltaics. , 2014, Annual review of physical chemistry.

[28]  C. Singh,et al.  Influence of Thermal Annealing on PCDTBT:PCBM Composition Profiles , 2014 .

[29]  L. Dai,et al.  Graphene oxide derivatives as hole- and electron-extraction layers for high-performance polymer solar cells , 2014 .

[30]  Ifor D. W. Samuel,et al.  Determining the optimum morphology in high-performance polymer-fullerene organic photovoltaic cells , 2013, Nature Communications.

[31]  Germà Garcia-Belmonte,et al.  Polymer defect states modulate open-circuit voltage in bulk-heterojunction solar cells , 2013 .

[32]  Gonzalo Santoro,et al.  A Direct Evidence of Morphological Degradation on a Nanometer Scale in Polymer Solar Cells , 2013, Advanced materials.

[33]  Gang Li,et al.  25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research , 2013, Advanced materials.

[34]  John R. Tumbleston,et al.  The Importance of Fullerene Percolation in the Mixed Regions of Polymer–Fullerene Bulk Heterojunction Solar Cells , 2013 .

[35]  Shawn Bourdo,et al.  Organic Solar Cells: A Review of Materials, Limitations, and Possibilities for Improvement , 2013 .

[36]  Xizu Wang,et al.  Degradation mechanisms in organic solar cells: Localized moisture encroachment and cathode reaction , 2012 .

[37]  M. Toney,et al.  Correlating the scattered intensities of P3HT and PCBM to the current densities of polymer solar cells. , 2011, Chemical communications.

[38]  Suren A. Gevorgyan,et al.  Degradation patterns in water and oxygen of an inverted polymer solar cell. , 2010, Journal of the American Chemical Society.

[39]  Zhenan Bao,et al.  Effects of Thermal Annealing Upon the Morphology of Polymer–Fullerene Blends , 2010 .

[40]  Luping Yu,et al.  Structure, dynamics, and power conversion efficiency correlations in a new low bandgap polymer: PCBM solar cell. , 2010, The journal of physical chemistry. B.

[41]  P. Shaw,et al.  Probing the nanoscale phase separation in binary photovoltaic blends of poly(3-hexylthiophene) and methanofullerene by energy transfer. , 2009, Dalton transactions.

[42]  F. Krebs,et al.  Stability/degradation of polymer solar cells , 2008 .

[43]  Valentin D. Mihailetchi,et al.  Charge Transport and Photocurrent Generation in Poly(3‐hexylthiophene): Methanofullerene Bulk‐Heterojunction Solar Cells , 2006 .

[44]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[45]  Nahed Dokhane,et al.  Solar Energy Materials and Solar Cells , 2017 .

[46]  K. Tada.  Thermally robust bulk heterojunction photocells based on PTB7:C70 composites , 2015 .