Numerical simulation of breakage of two-dimensional polygon-shaped particles using discrete element method

Abstract Using DEM (Discrete Element Method), a model is presented to simulate the breakage of two-dimensional polygon-shaped particles. In this model each uniform (uncracked) particle is replaced with smaller inter-connected sub-particles which are bonded with each other. If the bond between these sub-particles breaks, breakage will happen. With the help of this model, it is possible to study the influence of particle breakage on macro and micro mechanical parameters. In this simulation, the evolution of microstructure in granular assemblies can be seen by tracing of coordination number during the shear process. Also variation of contact normal, normal force and tangential force anisotropy can be tracked. To do so, two series of biaxial test simulations (breakage is enabled and disabled) are conducted on assemblies of two-dimensional polygon-shaped particles and the results are compared. The results are presented in terms of macro and micro mechanical behavior for different confining pressures.

[1]  R. Whitman,et al.  Soil mechanics, SI version , 1969 .

[2]  Alexander V. Potapov,et al.  Computer simulation of impact-induced particle breakage , 1994 .

[3]  D. J. Barnes,et al.  Computer simulated deformation of compact granular assemblies , 1986 .

[4]  Melvin J. Dubnick.  Army Corps of Engineers , 1998 .

[5]  Richard J. Bathurst,et al.  Micromechanical features of granular assemblies with planar elliptical particles , 1992 .

[6]  Y. Ta,et al.  Discrete element simulation of crushable soil , 2003 .

[7]  D. Robertson,et al.  DEM simulations of crushable grains and soils , 2020, Powders and Grains 2001.

[8]  Raúl J. Marsal,et al.  Large Scale Testing of Rockfill Materials , 1967 .

[9]  L. Rothenburg,et al.  NUMERICAL SIMULATIONS OF ASSEMBLIES OF TWO-DIMENSIONAL POLYGON-SHAPED PARTICLES AND EFFECTS OF CONFINING PRESSURE ON SHEAR STRENGTH , 1997 .

[10]  R. Bathurst,et al.  Analytical study of induced anisotropy in idealized granular materials , 1989 .

[11]  Malcolm D. Bolton,et al.  Discrete element simulation of crushable soil , 2003 .

[12]  R. J. Marsal,et al.  MECHANICAL PROPERTIES OF ROCKFILL , 1973 .

[13]  E. S. Hosseininia,et al.  Effect of Confining Pressure on Particle Breakage of Assemblies of Simulated Angular particles Using Discrete Element Method , 2004 .

[14]  Alexander V. Potapov,et al.  Computer simulation of shear-induced particle attrition , 1997 .

[15]  H. Seed,et al.  Evaluation of Properties of Rockfill Materials , 1972 .

[16]  Glenn R. McDowell,et al.  Discrete element modelling of soil particle fracture , 2002 .

[17]  Roger D. Hart,et al.  Development of Generalized 2-D and 3-D Distinct Element Programs for Modeling Jointed Rock , 1985 .

[18]  Hans J. Herrmann,et al.  A study of fragmentation processes using a discrete element method , 1995, cond-mat/9512017.

[19]  K. G. Sharma,et al.  Testing and Modeling Two Rockfill Materials , 2003 .

[20]  A. A. Mirghasemi,et al.  Influence of particle shape on engineering properties of assemblies of two-dimensional polygon-shaped particles , 2002 .