Structural numerical analysis of a three fingers prosthetic hand prototype

In spite of the importance of the finite element method analysis in the mechanical design, there are a few research works in the prosthetic hands design area that use this tool. This work uses the finite element method to perform a structural analysis of a prosthetic hand prototype during the cylindrical and tip grasp. Through geometric relations, a set of equations was developed in order to define the position of the prosthesis elements from the position of the actuator. The loads in the numerical analysis were calculated by modeling a static analysis, in which the forces that the fingers of the prosthesis can exert at the tip were obtained. The results are presented in a graphic form showing the load of the fingertip as function of the position of the actuator and the maximum force that can be exerted. It is shown as well the field stress present in the mechanism of the hand simulator for the most critical position and the field stress of the prosthesis prototype. Both parameters were calculated with the use of ANSYS Workbench 2.0 ®   Key words: Upper limb prosthesis, prehensile force, finite element method, four-bar linkage, structural analysis.

[1]  Paolo Dario,et al.  The SPRING Hand: Development of a Self-Adaptive Prosthesis for Restoring Natural Grasping , 2004, Auton. Robots.

[2]  Hong Liu,et al.  The Mechanical Design and Experiments of HIT/DLR Prosthetic Hand , 2006, 2006 IEEE International Conference on Robotics and Biomimetics.

[3]  Silvestro Micera,et al.  On the development of a novel adaptive prosthetic hand with compliant joints: experimental platform and EMG control , 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[4]  Salvador Cardona Foix,et al.  Teoría de máquinas , 2001 .

[5]  A. Kargov,et al.  Development of a Multifunctional Cosmetic Prosthetic Hand , 2007, 2007 IEEE 10th International Conference on Rehabilitation Robotics.

[6]  A. Kargov,et al.  A comparison of the grip force distribution in natural hands and in prosthetic hands , 2004, Disability and rehabilitation.

[7]  Antoanela Naaji,et al.  The application of the finite element method in the biomechanics of the human upper limb and of some prosthetic components , 2009 .

[8]  Dapeng Yang,et al.  An anthropomorphic robot hand developed based on underactuated mechanism and controlled by EMG signals , 2009 .

[10]  Yuan Yao,et al.  Super Under-Actuated Humanoid Robot Hand with Gear-Rack Mechanism , 2008, ICIRA.

[11]  Mark M. McGrath,et al.  Mechanical Design and Theoretical Analysis of a Four Fingered Prosthetic Hand Incorporating Embedded SMA Bundle Actuators , 2007 .

[12]  Constantinos Mavroidis,et al.  Mechanical design of a shape memory alloy actuated prosthetic hand. , 2002, Technology and health care : official journal of the European Society for Engineering and Medicine.

[13]  Haruhisa Kawasaki,et al.  Dexterous anthropomorphic robot hand with distributed tactile sensor: Gifu hand II , 1999, IEEE SMC'99 Conference Proceedings. 1999 IEEE International Conference on Systems, Man, and Cybernetics (Cat. No.99CH37028).

[14]  Loredana Stanciu,et al.  Designing and Implementing a Human Hand Prosthesis , 2009 .

[15]  R. Clement,et al.  Bionic prosthetic hands: A review of present technology and future aspirations. , 2011, The surgeon : journal of the Royal Colleges of Surgeons of Edinburgh and Ireland.

[16]  Tomáš Návrat,et al.  Finite element analysis for the evaluation of the structural behaviour, of a prosthesis for trans-tibial amputees. , 2012, Medical engineering & physics.

[17]  Z. Mahboob.  Finite Element Investigation of Hybrid and Conventional Knee Implants , 2009 .

[18]  Wei Xu,et al.  Application of the Finite Element Method in Implant Dentistry , 2008 .

[19]  Silvestro Micera,et al.  Design of a cybernetic hand for perception and action , 2006, Biological Cybernetics.

[20]  Sung-yoon Jung,et al.  Grip force modeling of a tendon-driven prosthetic hand , 2008, 2008 International Conference on Control, Automation and Systems.

[21]  Sachin Watve,et al.  Upper limb prosthetic rehabilitation , 2011 .

[22]  M Controzzi,et al.  Online Myoelectric Control of a Dexterous Hand Prosthesis by Transradial Amputees , 2011, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[23]  Mona F. Taher,et al.  Mechanical design of an anthropomorphic prosthetic hand for shape memory alloy actuation , 2010, 2010 5th Cairo International Biomedical Engineering Conference.