MHD Generalized Couette Flow and Heat Transfer on Bingham Fluid Through Porous Parallel Plates

1 Bruno, R., Bevilacqua, P., Ferraro, V., Arcuri, N. Second law analysis for the optimization of plate heat exchangers Design Optimization, Entropy Generation Minimization Model, Plate Heat Exchanger, Parametric Study 6, 4, 475-482 10.18280/mmep.060401 Bruno, R., Bevilacqua, P., Ferraro, V., Arcuri, N. (2019). Second law analysis for the optimization of plate heat exchangers. Mathematical Modelling of Engineering Problems, Vol. 6, No. 4, pp. 475-482. https://doi.org/10.18280/mmep.060401

[1]  E. C. Bingham.  Fluidity And Plasticity , 1922 .

[2]  B. C. Sakiadis.  Boundary‐layer behavior on continuous solid surfaces: I. Boundary‐layer equations for two‐dimensional and axisymmetric flow , 1961 .

[3]  V. M. Soundalgekar,et al.  Heat transfer in flow past a continuous moving plate with variable temperature , 1980 .

[4]  C. Mei,et al.  Slow spreading of a sheet of Bingham fluid on an inclined plane , 1989, Journal of Fluid Mechanics.

[5]  K. Rao,et al.  The Effect of Hall Current on U nsteady MHD Free Convective Couette Flow of a Bingham Fluid with Thermal Radiation , 2014 .

[6]  D. Rees,et al.  Unsteady thermal boundary layer flows of a Bingham fluid in a porous medium , 2015 .

[7]  Rajib Bag,et al.  A new method for tutorial gap identification towards students modeling , 2017 .

[8]  A. Belhadj.  Free vibration modelling of Single-walled Carbon Nanotubes using the Differential Quadrature Method , 2017 .

[9]  M. Oni,et al.  Unsteady couette flow in an annulus with combined mode of magnetic field application: A generalization , 2017 .

[10]  B. Melik,et al.  Structure and mechanical properties of steels for thermochemical treatment , 2017 .

[11]  Asok Kumar,et al.  Intelligent calibration technique using optimized fuzzy logic controller for ultrasonic flow sensor , 2017 .

[12]  Quanyu Wang,et al.  Blind source separation of indoor mobile voice sources , 2017 .

[13]  Z. Idris,et al.  Mathematical modelling using response surface methodology for optimization of the operating conditions for esteramine production aided by solid catalyst , 2017 .

[14]  Xiaorong Wang,et al.  Effect of ambient condition on n-heptane droplet evaporation , 2017 .

[15]  Gautam Sarkar,et al.  Design of different reference model based model reference adaptive controller for inversed model non-minimum phase system , 2017 .

[16]  CUSUM tests for change points in AR(P) models , 2017 .

[17]  Azeotropic points with relative volatility-prediction and calculation , 2017 .

[18]  Utpal Roy,et al.  A PLM-based data analytics approach for improving product development lead time in an engineer-to-order manufacturing firm , 2017 .

[19]  Zaoui F. Zohra,et al.  Free vibration analysis of functionally graded beams using a higher-order shear deformation theory , 2017 .

[20]  Tong Zhu,et al.  Simulation on the effects of various factors on the motion of ultrasonic cavitation bubble , 2017 .

[21]  Yanán Medina,et al.  Design and modelation of piping systems by means of use friction factor in the transition turbulent zone , 2017 .

[22]  Utpal Roy,et al.  Formation control for multiple unmanned aerial vehicles in constrained space using modified artificial potential field , 2017 .

[23]  Sonali Banerjee,et al.  A modified mathematical model for lifetime enhancement in wireless sensor network , 2017 .

[24]  Demouche Mourad,et al.  Experimental characterization of the Heat Affected Zone (HAZ) properties of 100Cr6 steel joined by rotary friction welding method , 2017 .

[25]  Alok Singh,et al.  A Multi-objective PSO (MOPSO) algorithm for optimal active power dispatch with pollution control , 2017 .

[26]  Djamel Ghernaout,et al.  Two transitions of thermosolutal natural convection in the presence of an external magnetic field , 2017 .

[27]  Abstract of heat transfer coefficient modelation in single-phase systems inside pipes , 2017 .

[28]  Abdelhafid Moummi,et al.  Numerical study of natural convection in an inclined enclosure: application to flat plate solar collectors , 2017 .

[29]  M. Ali,et al.  The effect of the plastic instability on the behavior of an amorphous polymere , 2017 .

[30]  Boukhelf Fouad,et al.  Static analysis of P-FGM beams resting on the Winkler elastic foundations , 2017 .

[31]  Subscribers Only.  Application of Gray Prediction and Linear Programming Model in Economic Management , 2017 .

[32]  Charles Chinwuba Ike.  Flexural Analysis of Kirchhoff plates on Winkler foundations using finite Fourier sine integral transform method , 2017 .

[33]  M. Islam,et al.  Numerical Solution of Unsteady Viscous Compressible Fluid Flow along a Porous Plate with Induced Magnetic Field , 2017 .

[34]  Bailin Liu,et al.  Optimal Reactive Power Planning Considering the Adjustment Coefficient of Generator Excitation System , 2017 .

[35]  J. L. Chen.  Non-circular crane rail theory and parametric design , 2017 .

[36]  Goutam Paul,et al.  Prediction of tangential force and maximum temperature generation at the tool tip using ANFIS model during CNC turning operations for an intricate shape , 2017 .

[37]  J. Balaraju,et al.  Evaluation of influential measures to control the monetary aspects of load haul dump machine-case study , 2017 .

[38]  Halitim Siham Houria,et al.  DMFC water management in presence of heat sources , 2017 .

[39]  Syed Tirmizi.  Hierarchical linear modelling of risk assessment of petroleum installations , 2017 .

[40]  Govind Goyal,et al.  Solution of an ELD problem with valve-point effect using artificial intelligence techniques , 2017 .

[41]  Sourish Sanyal,et al.  Computer-aided analysis of saturation in synchronous machines , 2017 .

[42]  C. Balocco,et al.  Heat and moisture transfer investigation of surface building materials , 2018, Mathematical Modelling of Engineering Problems.

[43]  M. Ahmadi,et al.  Chemically reacting Carreau fluid in a suspension of convective conditions over three geometries with Cattaneo-Christov heat flux model , 2018, Mathematical Modelling of Engineering Problems.

[44]  Charles Chinwuba Ike.  Exponential fourier integral transform method for stress analysis of boundary load on soil , 2018 .

[45]  Yanan Camaraza-Medina,et al.  Evaluation of condensation heat transfer in air-cooled condenser by dominant flow criteria , 2018, Mathematical Modelling of Engineering Problems.

[46]  Andrés A. Sánchez-Escalona,et al.  Artificial neural network modeling of hydrogen sulphide gas coolers ensuring extrapolation capability , 2018, Mathematical Modelling of Engineering Problems.

[47]  M. Cellura,et al.  Introducing exergy analysis in life cycle assessment: A case study , 2018, Mathematical Modelling of Engineering Problems.

[48]  E. Naboni,et al.  Thermophysical characterization of a cardboard emergency kit-house , 2018, Mathematical Modelling of Engineering Problems.

[49]  S. Lazzari,et al.  Cost optimal analysis of energy refurbishment actions depending on the local climate and its variations , 2018, Mathematical Modelling of Engineering Problems.

[50]  Syed Tirmizi.  GIS based risk assessment of oil spill and gas leakage vulnerable zones in Pakistan , 2018, Mathematical Modelling of Engineering Problems.

[51]  M. Islam,et al.  Hall and ion-slip effects on unsteady MHD Bingham fluid flow with suction , 2018, Modelling, Measurement and Control B.

[52]  M. Nazari,et al.  Applications of nanofluids in geothermal: A review , 2018, Mathematical Modelling of Engineering Problems.

[53]  E. Amiri.  Application of computational experiments based on the response surface methodology for studying of the recirculation zone in the Y-shaped channel , 2018, Mathematical Modelling of Engineering Problems.

[54]  Matteo Caldera,et al.  Survey-based analysis of the electrical energy demand in Italian households , 2018, Mathematical Modelling of Engineering Problems.

[55]  Arpan Halder,et al.  Investigation of wireless tracking performance in the tunnel-like environment with particle filter , 2018, Mathematical Modelling of Engineering Problems.

[56]  M. Cannistraro,et al.  Testing a dual-source heat pump , 2018, Mathematical Modelling of Engineering Problems.

[57]  Hui Yu.  Numerical simulation of European option payoff based on stochastic differential delay equations , 2018 .

[58]  Charles Chinwuba Ike.  Flexural analysis of rectangular kirchhoff plate on winkler foundation using galerkin-vlasov variational method , 2018 .

[59]  T. Cardinale,et al.  Clay and fibers: Energy efficiency in buildings between tradition and innovation , 2018, Mathematical Modelling of Engineering Problems.

[60]  Luigi Marletta,et al.  Weather data morphing to improve building energy modeling in an urban context , 2018, Mathematical Modelling of Engineering Problems.

[61]  Ahmed Youssef,et al.  Fixed ground-target tracking control of satellites using a nonlinear model predictive control , 2018 .

[62]  Nevaid Dzimunya,et al.  Design and dimensioning of sublevel stoping for extraction of thin ore (< 12 m) at very deep level: a case study of konkola copper mines (kcm), Zambia , 2018 .

[63]  Ahmed Youssef,et al.  Operations of electric vehicle traction system , 2018, Mathematical Modelling of Engineering Problems.

[64]  F. Nocera,et al.  Energy performance of cross-laminated timber panel (X-Lam) buildings: A case study , 2018, Mathematical Modelling of Engineering Problems.

[65]  N. S. Harish Kumar,et al.  Reliability-based preventive maintainability analysis of shovel-dumper system in surface coal mine using ANN and isograph reliability workbench , 2018 .

[66]  Anna Chiari,et al.  The importance of thermal bridge correction in energy refurbishment of existing buildings , 2018 .

[67]  M. Ahmadi,et al.  Technical and economical optimization of CHP systems by using gas turbine and energy recovery system , 2018, Mathematical Modelling of Engineering Problems.

[68]  Debashish Chakravarty,et al.  Wireless relay placement optimization in underground room and pillar mines , 2018 .

[69]  A. M. Abed,et al.  Effect of partially thermally active wall on natural convection in porous enclosure , 2018, Mathematical Modelling of Engineering Problems.

[70]  Michele Trancossi,et al.  Can constructal law and exergy analysis produce a robust design method that couples with industry 4.0 paradigms? The case of a container house , 2018, Mathematical Modelling of Engineering Problems.

[71]  Brihmat Mostefa,et al.  Plackett-burman desing to study the influence of the stiffness of hydrodynamic bearings on the dynamic behaviour of turbo machinery , 2018, Mathematical Modelling of Engineering Problems.

[72]  A. Benchatti,et al.  The relaxation effect on residual stress value in butt-welded X70 steel , 2018, Mathematical Modelling of Engineering Problems.

[73]  Z. Driss,et al.  Natural convective heat transfer from a heated horizontal elliptical cylinder to its coaxial square enclosure , 2018, Mathematical Modelling of Engineering Problems.

[74]  Y. Huang,et al.  A thin supported Pd-Au based membrane for hydrogen generation and purification: A case study , 2018, Mathematical Modelling of Engineering Problems.

[75]  Brajesh Tripathi,et al.  Numerical simulation of two-dimensional fluid flow problem using truly meshfree method , 2018, Mathematical Modelling of Engineering Problems.

[76]  José C. Páscoa,et al.  A new dimensionless approach to general fluid dynamics problems that accounts both the first and the second law of thermodynamics , 2018, Mathematical Modelling of Engineering Problems.

[77]  Karanam U. M. Rao,et al.  A robust approach for WSN localization for underground coal mine monitoring using improved RSSI technique , 2018, Mathematical Modelling of Engineering Problems.

[78]  M. Pietrafesa,et al.  Evaluation of the direct and diffused component of solar radiation starting from global radiation measurements: Preliminary analysis , 2018, Mathematical Modelling of Engineering Problems.

[79]  B. Choudhary,et al.  Effect of rock properties on rippability of laterite in Iron Ore mines of Goa , 2018, Mathematical Modelling of Engineering Problems.

[80]  Shankar Kumar,et al.  Influence of initiation system on blast-induced ground vibration using random forest algorithm, artificial neural network, and scaled distance analysis , 2018, Mathematical Modelling of Engineering Problems.

[81]  Charles Chinwuba Ike,et al.  Ritz variational method for bending of rectangular kirchhoff plate under transverse hydrostatic load distribution , 2018 .

[82]  M. Nazari,et al.  A review on the solar applications of thermosyphons , 2018 .

[83]  M. Cucumo,et al.  A simple correlation for the dynamic simulation of a solar thermal plant connected to a radiant floor , 2018, Mathematical Modelling of Engineering Problems.

[84]  Raju Bala,et al.  Reliability analysis and failure rate evaluation of load haul dump machines using Weibull distribution analysis , 2018, Mathematical Modelling of Engineering Problems.

[85]  Taiwo S. Yusuf,et al.  Transient pressure driven flow in an annulus partially filled with porous material: Azimuthal pressure gradient , 2018, Mathematical Modelling of Engineering Problems.

[86]  Koua Kamenan Blaise,et al.  Thermal performance amelioration of flat plate solar collector of an indirect dryer , 2018, Mathematical Modelling of Engineering Problems.

[87]  Annarita Viggiano,et al.  How to Enhance the Energy Efficiency of HVAC Systems , 2018 .

[88]  R. Vasanthakumari,et al.  Mixed convection of silver and titanium dioxide nanofluids along inclined stretching sheet in presence of MHD with heat generation and suction effect , 2018, Mathematical Modelling of Engineering Problems.

[89]  S. Jayanthu,et al.  Selection of suitable location and method for installation of TDR in opencast mine-an experimental approach , 2018, Mathematical Modelling of Engineering Problems.

[90]  Filippo Giammaria Praticò,et al.  Energy savings in transportation: Setting up an innovative SHM method , 2018 .

[91]  Yanan Camaraza-Medina,et al.  Simplified analysis of heat transfer through a finned tube bundle in air cooled condenser , 2018, Mathematical Modelling of Engineering Problems.

[92]  Charles Chinwuba Ike.  Energy formulation for flexural – torsional buckling of thin-walled column with open cross- section , 2018 .

[93]  E. C. Bingham.  An Investigation of the Laws of Plastic Flow , 2018 .

[94]  Mathematical analysis of a model on guava for biological pest control , 2018, Mathematical Modelling of Engineering Problems.

[95]  M. Kezzar,et al.  Analytical investigation of heat transfer of solar air collector by Adomian decomposition method , 2018 .

[96]  Yanan Camaraza-Medina,et al.  Simplified analysis of heat transfer through a finned tube bundle in air cooled condenser-second assessment , 2018, Mathematical Modelling of Engineering Problems.

[97]  D. P. Tripathy,et al.  Prevention of illegal transportation using ANPR and biometric fingerprint in mining industry , 2018, Mathematical Modelling of Engineering Problems.

[98]  A. Marchitto,et al.  Experiments on parallel connected loops in single phase natural circulation: preliminary results , 2018, Mathematical Modelling of Engineering Problems.

[99]  Jinxin Zhang,et al.  Numerical simulation and optimization analysis of thermal balance of heavy oil box-type substation louver arrangement , 2018 .

[100]  Raghavaiah Katuri,et al.  Analysis of math function based controller for a smooth transition between battery and ultracapacitor , 2018, Mathematical Modelling of Engineering Problems.

[101]  Ali J. Chamkha,et al.  Heat and nanofluid transfer in baffled channels of different outlet models , 2019, Mathematical Modelling of Engineering Problems.

[102]  Ali J. Chamkha,et al.  Study and Comparison Between Two Receivers of Parabolic Trough Collector , 2019, Mathematical Modelling of Engineering Problems.

[103]  M. Teggar,et al.  Numerical Investigation of Nanofluids Mixed Convection in a Vertical Channel , 2019 .

[104]  S. Fasogbon,et al.  On Blasius Plate Solution of Particle Dispersion and Deposition in Human Respiratory Track , 2019, Mathematical Modelling of Engineering Problems.

[105]  Yao Li,et al.  A Personalized Collaborative Filtering Recommendation Algorithm Based on Linear Regression , 2019, Mathematical Modelling of Engineering Problems.

[106]  Raghavaiah Katuri,et al.  Design and simulation of a controller for a hybrid energy storage system based electric vehicle , 2019, Mathematical Modelling of Engineering Problems.

[107]  Giulio Lorenzini,et al.  Makespan reduction using dynamic job sequencing combined with buffer optimization applying genetic algorithm in a manufacturing system , 2019 .

[108]  A. Seeni.  Aerodynamic Performance Characterization and Static Structural Analysis of Slotted Propeller: Part A Effect of Position , 2019 .

[109]  A. Abderrahim,et al.  Wind Energy Resource Assessment in South Western of Algeria , 2019, Mathematical Modelling of Engineering Problems.

[110]  M. Ahmadi,et al.  Investigation of energy saving in building by using phase-change materials (PCM) , 2019, Mathematical Modelling of Engineering Problems.

[111]  S. Sivanandam,et al.  Stratification, Slip and Cross Diffusion Impacts on Time Depending Convective Stream with Chemical Reaction , 2019 .

[112]  M. Mollah,et al.  Fluid Flow along the Riga Plate with the Influence of Magnetic Force in a Rotating System , 2019, 8TH BSME INTERNATIONAL CONFERENCE ON THERMAL ENGINEERING.

[113]  Royal Madan,et al.  Limit Elastic Analysis of E-FGM Rotating Disk with Temperature Dependent Mechanical Properties , 2019 .

[114]  C. R. Altafini,et al.  Performance effects and economic viability of high-hydrated ethanol fumigation and diesel direct injection in a small compression ignition engine , 2019, Mathematical Modelling of Engineering Problems.

[115]  G. Lorenzini,et al.  Impact of Mass Transpiration on Unsteady Boundary Layer Flow of Impulsive Porous Stretching , 2019, Mathematical Modelling of Engineering Problems.

[116]  M. Roshid,et al.  Breather Wave and Kinky Periodic Wave Solutions of One-Dimensional Oskolkov Equation , 2019, Mathematical Modelling of Engineering Problems.

[117]  A. Abourabia,et al.  Analytical solution of sea water steady magneto-hydrodynamic equations subjected to stretching sheet under induced magnetic field and heat transfer , 2019, Mathematical Modelling of Engineering Problems.

[118]  S. Motsa,et al.  MHD Mixed Convection Chemically Reactive Casson Fluid Flow over an Inclined Stretching/Shrinking Sheet: Paired Quasilinearization Approach (PQLM) , 2019, Mathematical Modelling of Engineering Problems.

[119]  Fabien Beaumont,et al.  How does aerodynamics influence physiological responses in middle-distance running drafting? , 2019, Mathematical Modelling of Engineering Problems.

[120]  Chuanfeng Zheng,et al.  A Backpropagation Neural Network-based Flexural-tensile Strength Prediction Model for Asphalt Mixture in Cold Regions under Cyclic Thermal Stress , 2019, Mathematical Modelling of Engineering Problems.

[121]  M. Kadri,et al.  Analysis of cylindrical shells by the Least Squares Method , 2019, Mathematical Modelling of Engineering Problems.

[122]  Djamel Bensahal,et al.  Solar drying of drying agricultural product (Apricot) , 2019, Mathematical Modelling of Engineering Problems.

[123]  Flow over an Exponentially Stretching Sheet with Double Dispersion and Convective Thermal Condition , 2019, Mathematical Modelling of Engineering Problems.

[124]  Davide De Domenico,et al.  Strategies for the Numerical Modelling of Regenerative Pre-heating Systems for Recycled Glass Raw Material , 2019, Mathematical Modelling of Engineering Problems.

[125]  Zhipeng Sun,et al.  Dynamic and Static Load Tests on a Large-span Rigid-frame Bridge , 2019 .

[126]  P. Rattanadecho,et al.  Numerical Analysis of Pollutant Concentration Dispersion and Convective Flow in a Two-dimensional Confluent River Model , 2019, Mathematical Modelling of Engineering Problems.

[127]  M. Mollah.  EMHD Laminar Flow of Bingham Fluid Between Two Parallel Riga Plates , 2019, International Journal of Heat and Technology.

[128]  Thulasi Bikku,et al.  An indigenous tool (NoJavaCloud) to handle virtual nodes to simulate the cloud tasks , 2019, Mathematical Modelling of Engineering Problems.

[129]  T. Tayebi,et al.  Improvement of Free Convection Heat Transfer in a Concentric Cylindrical Annulus Heat Exchanger Using Nanofluid , 2019 .

[130]  G. Lorenzini,et al.  Numerical Study of Mixed Convective Flow of a Couple Stress Fluid in a Vertical Channel with First Order Chemical Reaction and Heat Generation/Absorption , 2019, Mathematical Modelling of Engineering Problems.

[131]  S. Dutta,et al.  A numerical investigation of natural convection heat transfer of copper-water nanofluids in a rectotrapezoidal enclosure heated uniformly from the bottom wall , 2019, Mathematical Modelling of Engineering Problems.

[132]  Cristian Eparu,et al.  The comparative thermodynamic analysis of compressor’s energetic performance , 2019, Mathematical Modelling of Engineering Problems.

[133]  Ufaith Qadiri,et al.  Experimental investigation on multi-cylinder SI engine fueled conventional gasoline, ethanol blends, and micro-emulsion as an alternative fuel , 2019, Mathematical Modelling of Engineering Problems.

[134]  Jasem M. Alhumoud.  Non-equilibrium Natural Convection Flow through a Porous Medium , 2019, Mathematical Modelling of Engineering Problems.

[135]  Ali J. Chamkha,et al.  Numerical analysis of heat and nanofluid mass transfer in a channel with detached and attached baffle plates , 2019, Mathematical Modelling of Engineering Problems.

[136]  Mannam Venu Gopala Rao,et al.  Machine Learning Algorithm Based Static VAR Compensator to Enhance Voltage Stability of Multi-machine Power System , 2019 .

[137]  D. Barletta,et al.  Techno-environmental Assessment of Two Biorefinery Systems to Valorize the Residual Lignocellulosic Biomass of the Basilicata Region , 2019, Mathematical Modelling of Engineering Problems.

[138]  Zhenzi Zhang,et al.  Research on the first passage of double-layer micro-plate in the piezoelectric model , 2019, Mathematical Modelling of Engineering Problems.

[139]  A. Benchabane,et al.  Gradient Based Neural Network with Fourier Transform for AR Spectral Estimator , 2019, Mathematical Modelling of Engineering Problems.

[140]  Solute Transport Phenomena with Input Through a Plane Surface in Porous Media , 2019 .

[141]  Yingchao Zhou,et al.  Diagnosis of causes for high railway traffic based on Bayesian network , 2019 .

[142]  D. Baleanu,et al.  Nonlinear Stretching/Shrinking Cooling of a Sheet Involving an MHD Walters’ Liquid B with Suction , 2019, Mathematical Modelling of Engineering Problems.

[143]  K. Rhofir,et al.  Partitioning Differential Transformation for Solving Integro-differential Equations Problem and Application to Electrical Circuits , 2019, Mathematical Modelling of Engineering Problems.

[144]  G. Lorenzini,et al.  Centrifugal Instability with Convective Heat Transfer Through a Tightly Coiled Square Duct , 2019, Mathematical Modelling of Engineering Problems.

[145]  Yanan Camaraza-Medina,et al.  Suggested Method for Heat Transfer Calculation During Film Condensation Inside Pipes with Movable Frontiers , 2019, Mathematical Modelling of Engineering Problems.

[146]  Ammar Abdulkadhim,et al.  Experimental Investigation of Two-phase Fluid Flow over a Rectangular Obstructions Located Inside Enlarged Rectangular Channel , 2019, Mathematical Modelling of Engineering Problems.

[147]  A. H. Tarrad,et al.  Thermal Performance Prediction for Air Flow in a Wavy Corrugated Duct at Steady-State Constant Heat Flux Mode and Early Stages of Turbulent Flow Conditions , 2019 .

[148]  Pankratov Evgeny Leonidovich.  On Development of Analytical Approach for Analysis of Energy Transfer of Traveling Wave Tube , 2019, Mathematical Modelling of Engineering Problems.

[149]  M. Hegaze,et al.  In-flight Correction of the Satellite Orientation Parameter during Target Mode , 2019, Mathematical Modelling of Engineering Problems.

[150]  Ali J. Chamkha,et al.  Study of air flow around flat and arc-shaped baffles in shell-and-tube heat exchangers , 2019, Mathematical Modelling of Engineering Problems.

[151]  Ali J. Chamkha,et al.  Advances of Nanofluids in Solar Collectors - A Review of Numerical Studies , 2019, Mathematical Modelling of Engineering Problems.

[152]  M. Srivastava,et al.  Mathematical Modelling for the Performance of Encapsulated Phase Change TESS and Effect of Stefan’s Number , 2019, Mathematical Modelling of Engineering Problems.

[153]  M. Ferdows,et al.  Bingham Fluid Flow through Oscillatory Porous Plate with Ion-Slip and Hall Current , 2019, 8TH BSME INTERNATIONAL CONFERENCE ON THERMAL ENGINEERING.

[154]  Monoethanolamine Heat Exchangers Modeling Using the Buckingham Pi Theorem , 2019, Mathematical Modelling of Engineering Problems.

[155]  Mostafa Mrabti,et al.  The efficiency of the CORDIC Operator in the MIMO MC-CDMA receiver , 2019 .

[156]  R. Alayi,et al.  Energetic and Exergetic Analysis Hybrid Solid Oxide Fuel Cell Systems and Gas Turbine (SOFC-GT) , 2019, Mathematical Modelling of Engineering Problems.

[157]  M. H. A. Biswas,et al.  Mathematical modeling applied to renewable fishery management , 2019, Mathematical Modelling of Engineering Problems.

[158]  A. Driss,et al.  Experimental Investigation on the Thermal Performance of a Heat Pipe-based Cooling System , 2019, Mathematical Modelling of Engineering Problems.

[159]  The impacts of heat generation/absorption and partial slip on boundary layer flow and heat transfer of a nanofluid comprising of self-impelled motile microorganisms passing a stretching sheet , 2019, Mathematical Modelling of Engineering Problems.

[160]  C. Nabila,et al.  Numerical Study of Surface Roughness Effects on the Behavior of Fluid Flow in Micro-channels , 2019, Mathematical Modelling of Engineering Problems.

[161]  Mollah,et al.  Unsteady Viscous Incompressible Bingham Fluid Flow through a Parallel Plate , 2019, Inventions.

[162]  Jasem M. Alhumoud,et al.  Muskingum Method with Variable Parameter Estimation , 2019, Mathematical Modelling of Engineering Problems.

[163]  G. Lorenzini,et al.  Significance of Induced Magnetic Field and Exponential Space Dependent Heat Source on Quadratic Convective Flow of Casson Fluid in a Micro-channel via HPM , 2019, Mathematical Modelling of Engineering Problems.

[164]  Limin Cui,et al.  A Predictor-preview Controller for Discrete-time Systems with Input Delay and External Interference , 2019 .

[165]  Md. Rafiqul Islam,et al.  Hall Effects on Casson Fluid Flow along a Vertical Plate , 2019, 8TH BSME INTERNATIONAL CONFERENCE ON THERMAL ENGINEERING.

[166]  H. Rani,et al.  Analysis of Aspect Ratio Effects of Left Heated 2D Cavity Using Energy Streamlines and Field Synergy Principle , 2019, Mathematical Modelling of Engineering Problems.

[167]  A. Oyelami,et al.  Spherical Storage Tank Development Through Mathematical Modeling of Constituent Sections , 2019, Mathematical Modelling of Engineering Problems.

[168]  Ali J. Chamkha,et al.  Computational Fluid Dynamics Based Numerical Simulation of Thermal and Thermo-hydraulic Performance of a Solar Air Heater Channel Having Various Ribs on Absorber Plates , 2019, Mathematical Modelling of Engineering Problems.

[169]  G. C. Dash,et al.  Higher Order Chemical Reaction on MHD Nanofluid Flow with Slip Boundary Conditions: A Numerical Approach , 2019, Mathematical Modelling of Engineering Problems.

[170]  N. Ahmed,et al.  Unsteady MHD Mass Transfer Flow past a Temporarily Accelerated Semi-infinite Vertical Plate in Presence of Thermal Diffusion with Ramped Wall Temperature , 2019, Mathematical Modelling of Engineering Problems.

[171]  G. Lorenzini,et al.  A computational analysis for boundary layer flow of magneto hydrodynamic tangent hyperbolic fluid of heat and mass transfer past a stretching cylinder with suction/injection using spectral relaxation method , 2019, Mathematical Modelling of Engineering Problems.