论文信息 - Application of Double Fourier Series for Analyzing Harmonics of a Modular Multilevel Converter

Application of Double Fourier Series for Analyzing Harmonics of a Modular Multilevel Converter

This paper presents an application of double Fourier series (DFS) algorithm for analyzing harmonics of a modular multilevel converter (MMC). By considering the effect of arm inductor, the application of DFS for calculating harmonics in the MMC is made. The DFS is then verified by comparing with simulation results used the fast Fourier transform (FFT) algorithm. Subsequently, the DFS will be used to analyze the effect of number of output voltage levels to the distribution of harmonics and total harmonic distortion (THD) in the MMC. The analytical results are performed in the Matlab programming in order to verify the theoretical analysis.

[1] W. Bennett. New results in the calculation of modulation products , 1933 .

[2] Eel-Hwan Kim,et al. An Application of Proportional-Resonant Controller in MMC-HVDC System under Unbalanced Voltage Conditions , 2014 .

[3] Wing Hong Lau,et al. Analytical technique for calculating the output harmonics of an H-bridge inverter with dead time , 1999 .

[4] Shin-Kuan Chen,et al. Accurate Assessment of Harmonic and Interharmonic Currents Generated by VSI-Fed Drives Under Unbalanced Supply Voltages , 2011, IEEE Transactions on Power Delivery.

[5] Jian Sun,et al. Frequency-Domain Modeling of Multipulse Converters by Double-Fourier Series Method , 2011, IEEE Transactions on Power Electronics.

[6] Reza Iravani,et al. Dynamic performance of a modular multilevel back-to-back HVDC system , 2010, 2011 IEEE Power and Energy Society General Meeting.

[7] Thomas A. Lipo,et al. Pulse Width Modulation for Power Converters: Principles and Practice , 2003 .