Topological and sizing optimization of reinforced ribs for a machining centre

The topology optimization technique is applied to improve rib designs of a machining centre. The ribs of the original design are eliminated and new ribs are generated by topology optimization in the same 3D design space containing the original ribs. Two-dimensional plate elements are used to replace the optimum rib topologies formed by 3D rectangular elements. After topology optimization, sizing optimization is used to determine the optimum thicknesses of the ribs. When forming the optimum design problem, multiple configurations of the structure are considered simultaneously. The objective is to minimize rib weight. Static constraints confine displacements of the cutting tool and the workpiece due to cutting forces and the heat generated by spindle bearings. The dynamic constraint requires the fundamental natural frequency of the structure to be greater than a given value in order to reduce dynamic deflection. Compared with the original design, the improvement resulting from this approach is significant.

[1]  T. A. Harris,et al.  Rolling Bearing Analysis , 1967 .

[2]  A. Palmgren.  Ball and roller bearing engineering , 1945 .

[3]  Yoon Young Kim,et al.  Topology optimization of beam cross sections , 2000 .

[4]  H. Mlejnek,et al.  An engineer's approach to optimal material distribution and shape finding , 1993 .

[5]  Lothar Harzheim,et al.  A review of optimization of cast parts using topology optimization , 2005 .

[6]  J. Chung,et al.  Optimal design of rib structures using the topology optimization technique , 1997 .

[7]  N. L. Pedersen.  Maximization of eigenvalues using topology optimization , 2000 .

[8]  Ren-Jye Yang,et al.  Automotive applications of topology optimization , 1995 .

[9]  Y. Xie,et al.  Evolutionary structural optimization for problems with stiffness constraints , 1996 .

[10]  K. Svanberg,et al.  On the trajectories of penalization methods for topology optimization , 2001 .

[11]  K. Maute,et al.  Conceptual design of aeroelastic structures by topology optimization , 2004 .

[12]  N. Olhoff,et al.  Optimum topology and reinforcement design of disk and plate structures with multiple stiffness and eigenfrequency objectives , 1999 .

[13]  Lothar Harzheim,et al.  A review of optimization of cast parts using topology optimization , 2005 .

[14]  Ren-Jye Yang,et al.  Optimal topology design using linear programming , 1994 .

[15]  Tao Jiang,et al.  A Systems Approach to Structural Topology Optimization: Designing Optimal Connections , 1997 .

[16]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[17]  Ting-Yu Chen,et al.  Multiobjective optimal topology design of structures , 1998 .

[18]  O. Sigmund,et al.  Checkerboard patterns in layout optimization , 1995 .