Mechanical Behavior and Strengthening Mechanisms in Ultrafine Grain Precipitation-Strengthened Aluminum Alloy

To provide insight into the relationships between precipitation phenomena, grain size and mechanical behavior in a complex precipitation-strengthened alloy system, Al 7075 alloy, a commonly used aluminum alloy, was selected as a model system in the present study. Ultrafine-grained (UFG) bulk materials were fabricated through cryomilling, degassing, hot isostatic pressing and extrusion, followed by a subsequent heat treatment. The mechanical behavior and microstructure of the materials were analyzed and compared directly to the coarse-grained (CG) counterpart. Three-dimensional atom-probe tomography was utilized to investigate the intermetallic precipitates and oxide dispersoids formed in the as-extruded UFG material. UFG 7075 exhibits higher strength than the CG 7075 alloy for each equivalent condition. After a T6 temper, the yield strength (YS) and ultimate tensile strength (UTS) of UFG 7075 achieved 734 and 774 MPa, respectively, which are ∼120 MPa higher than those of the CG equivalent. The strength of as-extruded UFG 7075 (YS: 583 MPa, UTS: 631 MPa) is even higher than that of commercial 7075-T6. More importantly, the strengthening mechanisms in each material were established quantitatively for the first time for this complex precipitation-strengthened system, accounting for grain-boundary, dislocation, solid-solution, precipitation and oxide dispersoid strengthening contributions. Grain-boundary strengthening was the predominant mechanism in as-extruded UFG 7075, contributing a strength increment estimated to be 242 MPa, whereas Orowan precipitation strengthening was predominant in the as-extruded CG 7075 (∼102 MPa) and in the T6-tempered materials, and was estimated to contribute 472 and 414 MPa for CG-T6 and UFG-T6, respectively.

[1]  Peter V Liddicoat,et al.  Nanostructural hierarchy increases the strength of aluminium alloys. , 2010, Nature communications.

[2]  Joseph R. Davis.  Properties and selection : nonferrous alloys and special-purpose materials , 1990 .

[3]  H. Gleiter,et al.  Nanostructured materials: basic concepts and microstructure☆ , 2000 .

[4]  R. Jayaganthan,et al.  Effect of Annealing on Thermal Stability, Precipitate Evolution, and Mechanical Properties of Cryorolled Al 7075 Alloy , 2011 .

[5]  David N. Seidman,et al.  Nanoscale co-precipitation and mechanical properties of a high-strength low-carbon steel , 2011 .

[6]  David C. Dunand,et al.  Coarsening resistance at 400 °C of precipitation-strengthened Al–Zr–Sc–Er alloys , 2011 .

[7]  R. Jayaganthan,et al.  Development of ultrafine grained high strength age hardenable Al 7075 alloy by cryorolling , 2011 .

[8]  J. Schoenung,et al.  Degassing Behavior of Nanostructured Al and Its Composites , 2010 .

[9]  P. Adler,et al.  Calorimetric studies of 7000 series aluminum alloys: I. Matrix precipitate characterization of 7075 , 1977 .

[10]  E. Hall,et al.  The Deformation and Ageing of Mild Steel: III Discussion of Results , 1951 .

[11]  X. Z. Li,et al.  GP-zones in Al–Zn–Mg alloys and their role in artificial aging , 2001 .

[12]  M. Fine.  Precipitation hardening of aluminum alloys , 1975 .

[13]  J. Schoenung,et al.  Microstructure and tensile properties of bulk nanostructured Al-5083/SiCp composites prepared by cryomilling , 2005 .

[14]  David C. Dunand,et al.  Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys , 2002 .

[15]  J. Schoenung,et al.  Influence of cryomilling on the microstructural features in HVOF-sprayed NiCrAlY bond coats for thermal barrier coatings: Creation of a homogeneous distribution of nanoscale dispersoids , 2010 .

[16]  R. Deiasi,et al.  Calorimetric studies of 7000 series aluminum alloys: II. Comparison of 7075, 7050 and RX720 alloys , 1977 .

[17]  A. Kelly,et al.  Strengthening methods in crystals , 1971 .

[18]  C. Schuh,et al.  Enhanced solid solution effects on the strength of nanocrystalline alloys , 2011 .

[19]  X. Z. Li,et al.  HREM study and structure modeling of the η′ phase, the hardening precipitates in commercial Al–Zn–Mg alloys , 1999 .

[20]  K. Cooper,et al.  Nanomechanics of Hall-Petch relationship in nanocrystalline materials , 2009 .

[21]  G. A. Malygin.  Strength and plasticity of nanocrystalline materials and nanosized crystals , 2011 .

[22]  David N. Seidman,et al.  Three-Dimensional Atom-Probe Tomography: Advances and Applications , 2007 .

[23]  A. Pinto,et al.  Retrogression and re-ageing of 7075 aluminium alloy : microstructural characterization , 1999 .

[24]  H. Gleiter,et al.  Nanostructured Materials: State of the Art and Perspectives , 1995 .

[25]  J. Pickens,et al.  The stress-corrosion cracking behavior of high-strength aluminum powder metallurgy alloys , 1987 .

[26]  Joseph R. Davis,et al.  Special Features of Structure Formation and Properties of Special High-Alloy Alloys of the Al – Si – Cu System , 2023, Metal Science and Heat Treatment.

[27]  Y. H. Zhao,et al.  Enhanced mechanical properties in ultrafine grained 7075 Al alloy , 2005 .

[28]  Dieter Isheim,et al.  Analysis of Three-dimensional Atom-probe Data by the Proximity Histogram , 2000, Microscopy and Microanalysis.

[29]  R. Fleischer,et al.  Solution hardening by tetragonal dist ortions: Application to irradiation hardening in F.C.C. crystals , 1962 .

[30]  E. Lavernia,et al.  Deformation and activation volumes of cryomilled ultrafine-grained aluminum , 2004 .

[31]  A. Deschamps,et al.  Microstructure-based modelling of isotropic and kinematic strain hardening in a precipitation-hardened aluminium alloy , 2011 .

[32]  Christopher D. Haines,et al.  Mechanical behavior of ultrafine-grained Al composites reinforced with B4C nanoparticles , 2011 .

[33]  R. Valiev,et al.  Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing , 2004 .

[34]  D. Seidman,et al.  An Atom-Probe Tomography Primer , 2009 .

[35]  John E. Carsley,et al.  Mechanical behavior of a bulk nanostructured iron alloy , 1998 .

[36]  E. Lavernia,et al.  Strain Hardening, Strain Softening and the Portevin-Le Chatelier Effect in Cryomilled, Ultrafine Grained AA 5083 , 2012 .

[37]  Tony J Collins,et al.  ImageJ for microscopy. , 2007, BioTechniques.

[38]  R. Valiev,et al.  Microhardness measurements and the Hall-Petch relationship in an AlMg alloy with submicrometer grain size , 1996 .

[39]  R. Fleischer,et al.  Substitutional solution hardening , 1963 .

[40]  Young-won Kim,et al.  Dispersion strengthened aluminum alloys : proceedings of the six-session symposium on "Dispersion Strengthend Aluminum Alloys", sponsored by the Powder Metallurgy and Structural Materials Committees of the Metallurgical Society held at the 1988 TMS Annual Meeting, Phoenix, Arizona, January 25-29, 19 , 1988 .

[41]  Xiaoxu Huang,et al.  Hardening by Annealing and Softening by Deformation in Nanostructured Metals , 2006, Science.

[42]  H. Andren,et al.  Atom‐probe field‐ion microscopy , 2007 .

[43]  E. Lavernia,et al.  Synthesis and mechanical behavior of nanostructured materials via cryomilling , 2006 .

[44]  J. Schoenung,et al.  Boundaries and interfaces in ultrafine grain composites , 2011 .

[45]  G. K. Williamson,et al.  X-ray line broadening from filed aluminium and wolfram , 1953 .

[46]  E. Lavernia,et al.  Strain Hardening, Strain Softening and the Portevin-Le Chatelier Effect in Cryomilled, Ultrafine Grained AA 5083 , 2012 .

[47]  J. Schoenung,et al.  Cryomilled nanostructured materials: Processing and properties , 2008 .

[48]  R. Cahn,et al.  Materials science and engineering , 2023, Nature.

[49]  Yonghao Zhao,et al.  Simultaneously Increasing the Ductility and Strength of Nanostructured Alloys , 2006 .

[50]  E. Lavernia,et al.  Strengthening Mechanisms in a High-Strength Bulk Nanostructured Cu-Zn-Al Alloy Processed Via Cryomilling and Spark Plasma Sintering , 2013 .

[51]  W. Liu,et al.  HRTEM and EELS study of aluminum nitride in nanostructured Al 5083/B4C processed via cryomilling , 2010 .

[52]  Simon P. Ringer,et al.  Microstructural Evolution and Age Hardening in Aluminium Alloys: Atom Probe Field-Ion Microscopy and Transmission Electron Microscopy Studies , 2000 .

[53]  D. Blavette,et al.  The tomographic atom probe: A quantitative three‐dimensional nanoanalytical instrument on an atomic scale , 1993 .

[54]  David N. Seidman,et al.  Prediction of the yield strength of a secondary-hardening steel , 2013 .

[55]  T. Srivatsan.  A review of: “DISPERSION STRENGTHENED ALUMINUM ALLOYS” edited by Y.-W. Kim and W.M. Griffith TMS, Warrendale, Pennsylvania 795 pages, hardcover, 1988 , 1991 .

[56]  Roberto B. Figueiredo,et al.  Ultrafine grains and the Hall-Petch relationship in an Al-Mg-Si alloy processed by high-pressure torsion , 2012 .

[57]  A. Ardell,et al.  Correlation between microstructure and calorimetric behavior of aluminum alloy 7075 and AlZnMg alloys in various tempers , 1989 .

[58]  J. E. Bailey,et al.  The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silver , 1960 .

[59]  Terence G. Langdon,et al.  The fundamentals of nanostructured materials processed by severe plastic deformation , 2004 .

[60]  T. Courtney,et al.  Mechanical Behavior of Materials , 1990 .

[61]  Bin Yang,et al.  Effect of Precipitations on Microstructures and Mechanical Properties of Nanostructured Al-Zn-Mg-Cu Alloy , 2008 .

[62]  S. Nutt,et al.  Influence of Process Parameters on the Mechanical Behavior of an Ultrafine-Grained Al Alloy , 2012, Metallurgical and Materials Transactions A.

[63]  Michael K Miller,et al.  Invited review article: Atom probe tomography. , 2007, The Review of scientific instruments.

[64]  E. Donoso.  Calorimetric study of the dissolution of Guinier-Preston zones and η′ phase in Al-4.5at.%Zn-1.75at.%Mg , 1985 .

[65]  J. Schoenung,et al.  Precipitation phenomena in an ultrafine-grained Al alloy , 2013 .

[66]  K. T. Ramesh,et al.  Strengthening mechanisms in cryomilled ultrafine-grained aluminum alloy at quasi-static and dynamic rates of loading , 2009 .

[67]  R. Mishra,et al.  Additivity of strengthening mechanisms in ultrafine grained Al–Mg–Sc alloy , 2013 .

[68]  L. Wen,et al.  First-principles study of elastic and electronic properties of MgZn2 and ScZn2 phases in Mg-Sc-Zn alloy , 2010 .

[69]  N. Tsuji,et al.  Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed , 2009 .