Model-based diagnosis and fault tolerant control for multi-level inverters

This paper deals with a model-based approach for diagnosis switch faults in multi-level multi-phase voltage source inverters (VSI). The proposed fault detection and isolation (FDI) method requires only one voltage detector per phase leg to accurately allocate a faulty switch among 2m(n-1) switches in an n-level m-phase VSI. The pole voltage of each phase is monitored and digitized into 2n-1 levels. A fault is detected when an odd level of voltage is observed. After the fault is detected, certain switching modes are applied to the inverter and the resulting voltage levels are observed. By comparing finite numbers of the observed voltage levels to the fault signatures, the location of the faulty switch is accurately determined. The control of the switches is then changed to tolerate the faulty condition. This method is robust to the load variations and suitable for closed loop applications. It is applicable to micro inverters for solar systems with numerous semiconductor switches with minimum number of sensors.

[1]  Frede Blaabjerg,et al.  Review of fault diagnosis and fault-tolerant control for modular multilevel converter of HVDC , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[2]  Mohammad Reza Zolghadri,et al.  Open- and Short-Circuit Switch Fault Diagnosis for Nonisolated DC–DC Converters Using Field Programmable Gate Array , 2013, IEEE Transactions on Industrial Electronics.

[3]  Friedrich W. Fuchs,et al.  Reliability comparison of fault-tolerant 3L-NPC based converter topologies for application in wind turbine systems , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[4]  Yantao Song,et al.  A hybrid electric vehicle powertrain with fault-tolerant capability , 2012, 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[5]  E. Ribeiro,et al.  Fault-Tolerant Strategy for a Photovoltaic DC--DC Converter , 2013, IEEE Transactions on Power Electronics.

[6]  Mohamed Benbouzid,et al.  PWM inverter-fed induction motor-based electrical vehicles fault-tolerant control , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[7]  Bin Wu,et al.  Recent Advances and Industrial Applications of Multilevel Converters , 2010, IEEE Transactions on Industrial Electronics.

[8]  J. Dixon,et al.  High-level multistep inverter optimization using a minimum number of power transistors , 2006, IEEE Transactions on Power Electronics.

[9]  Jang-Mok Kim,et al.  Multiple open-switch faults detection and fautls tolerant method of three-level three-phase NPC active rectifier , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[10]  Bimal K. Bose,et al.  Global Energy Scenario and Impact of Power Electronics in 21st Century , 2013, IEEE Transactions on Industrial Electronics.

[11]  Yantao Song,et al.  Survey on Reliability of Power Electronic Systems , 2013, IEEE Transactions on Power Electronics.

[12]  Yu-Kang Lo,et al.  A module-integrated isolated solar micro-inverter , 2012, IEEE 10th International Conference on Industrial Informatics.